|
Dave Kreskowiak wrote: If you want something to start with, try Microsoft's Baseline Security Analyzer, here[^].
Thank you very much for your information.
|
|
|
|
|
Hi, I have 2 computer which connect a nework. How can i use a command prompt from the first computer to list all user name which exist on the second computer?
I already use the graphical tool (computer management by adding in MMC consol) but now i want to use the command prompt only.
|
|
|
|
|
There is no prewritten .EXE to do this. You could write your own app to do this using any lanugage you want, but WMI would probably come in handy.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Thank you very much for your information. I will try to find WMI script to do it or try to build my own application.
|
|
|
|
|
Hi, does anyone know how to copy the file from the recycle bin to the diskette or flash drive? Because i don't want to restore the file back to an original folder, because it might mess my other file.
|
|
|
|
|
Right click on the file in the Recycle Bin folder and 'Cut' it, then paste it whereever you want it to go.
Gavin Taylor
w: http://www.gavspace.com
|
|
|
|
|
Thank you very much for your idea. But it will lost from the recycle bin. How could it copy only to a difference place but still keep remain in the recycle bin?
|
|
|
|
|
I dont *think* it's directly possible through Explorer, you'd probobly need to write something to do it yourself.
The only way would be to cut and paste it somewhere else, copy it and then delete it again... Thats that whole increased productivity thing in action again 
Gavin Taylor
w: http://www.gavspace.com
|
|
|
|
|
Thank you very much for your suggestion. I will do it in that way.
|
|
|
|
|
Hello,
I have a GIF that is the cover of a textbook. I want to convert it so I can
store documents in it (i.e. the textbook). How to proceed? Thanks!
|
|
|
|
|
You want to convert a GIF FILE into a FOLDER??? 
Not going to happen.
You can scan the pages of the book and make a PDF file out of them, but you'll have to wander over to Adobe's site for that. You won't be able to do it without a good amount of manual labor.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
In my opinion, it is impossible to do that.
|
|
|
|
|
I have tried many codes that changed local IP. But I have never found in vb.net. Following code is in c#.net that does this.Can any body convert it into vb.net??? I used many techniques by chaning registery settings, but failed!!!
I used the following links also, but many problem arrived.
http://www.dotnetjunkies.com/HowTo/2BDAC1D8-B277-4A82-B3E7-5B23B910D2B4.dcik[^]
c#.net code, changes Local IP Address
ManagementBaseObject inPar = null;
ManagementBaseObject outPar = null;
ManagementClass mc = new ManagementClass("Win32_NetworkAdapterConfiguration");
ManagementObjectCollection moc = mc.GetInstances();
foreach( ManagementObject mo in moc )
{
if( ! (bool) mo[ "IPEnabled" ] )
continue;
inPar = mo.GetMethodParameters( "EnableStatic" );
inPar["IPAddress"] = new string[] { "128.10.63.63" };
inPar["SubnetMask"] = new string[] { "255.255.0.0" };
outPar = mo.InvokeMethod( "EnableStatic", inPar, null );
break;
}
}
Any query related to VB.NET+Network Programming
email: sharma.hariomprakash@gmail.com
|
|
|
|
|
This is the VB.NET version:
Dim inPar, outPar As ManagementBaseObject
Dim mc As New ManagementClass("Win32_NetworkAdapterConfiguration")
Dim moc As ManagementObjectCollection = mc.GetInstances()
For Each mo As ManagementObject In moc
If DirectCast(mo("IPEnabled"), Boolean) Then
inPar = mo.GetMethodParameters("EnabledStatic")
inPar("IPAddress") = New String(){"128.10.63.63"}
inPar("SubnetMask") = New String(){"255.255.0.0"}
outPar = mo.InokeMethod("EnableStatic", inPar, Nothing)
Exit For
End If
Next
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
|
|
|
|
|
 Thank u Mr. Richard Deeming for the code conversion!!!!! Some error were found but After removing these the following code is best!!!! (with running condition)
Dim inPar, outPar As ManagementBaseObject
Dim mc As New ManagementClass("Win32_NetworkAdapterConfiguration")
Dim moc As ManagementObjectCollection = mc.GetInstances()
For Each mo As ManagementObject In moc
If DirectCast(mo("IPEnabled"), Boolean) Then
inPar = mo.GetMethodParameters("EnableStatic")
inPar("IPAddress") = New String() {"128.10.63.65"}
inPar("SubnetMask") = New String() {"255.255.0.0"}
outPar = mo.InvokeMethod("EnableStatic", inPar, Nothing)
Exit For
End If
Next
End Sub
Any query related to VB.NET+Network Programming
email: sharma.hariomprakash@gmail.com
|
|
|
|
|
|
He's looking for code to CHANGE the IP, not just get the current IP's.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
|
|
I have following code in vb.net which can change system name of a local system. But it only works on WinXP. Is there any another way the same does on Win2000?
Dim name, password, username As String
name = "Studio11" '' new system name
'password = "area" '' may be NULL
'username = "Studio" '' may be NULL
Dim t As Single
Dim objWMIService, objComputer As Object
objWMIService = GetObject("Winmgmts:root\cimv2")
' Call always gets only one Win32_ComputerSystem object.
For Each objComputer In objWMIService.InstancesOf("Win32_ComputerSystem")
t = objComputer.rename(name, Nothing, Nothing)
MsgBox(t)
If t <> 0 Then
'WScript.Echo("Rename failed. Error = " & Err.Number)
MsgBox("ERROR")
Else
'WScript.Echo("Rename succeeded. Reboot for new name to go into effect")
Dim res As String = MsgBox("User Name/Password has been changed! Please restart your system!", MsgBoxStyle.YesNoCancel + MsgBoxStyle.Information, "Restart Now")
If res = vbYes Then
'restart your system
End If
End If
Next
Any query related to VB.NET+Network Programming
email: sharma.hariomprakash@gmail.com
|
|
|
|
|
As documented here[^], the Rename method only works on XP and Vista. 2000 is not supported.
If you want to rename the computer on just about every version of Windows, you'll have to call the Win32 API function SetComputerName[^].
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I have a LAN.
When i tried to connect to computer in workgroup, It want to enter Username and password. How can i disable such message? On that computer i coudn't find such setting.
|
|
|
|
|
it asks the username/password of an account of the deestination machine.
if the computer you're connecting is protected by members accounts, then you cannot bypass this rule. it is exactly the same when you are physically on the computer, and wish to log-on on it...
TOXCCT >>> GEII power
[toxcct][VisualCalc 2.20][VCalc 3.0 soon...]
|
|
|
|
|
It has only one Account with admin privilages. Yesterday i had an acsess, but today it requires. I have restarted both machines without any sucsess. And used connection wizzard on both machines without any sucsess.
|
|
|
|
|
It worked yesterday because the account you used on one machine had the same username and password the other machine recognized. This is because each machine in your workgroup has it's own set of user accounts and passwords.
The only sure-fire way around this is to reconfigure your workgroup LAN setup into a domain environment. That way, every machine in the domain will use a single set of user accounts.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
