|
Roger Wright wrote: usually yields some good clues about where to search next.
Yes, First I clearly do not understand the relationship between the dhcp service and the dns service.
For my testing enviroment my dsl router does provide dhcp capability. I turned off the dhcp on the server and back to where I started (could not fine the domain controler).
Ok turn it back on and configure the DHCP service. Ok, back to can not join due to "find the network path" again.
Running the dcdiag does give me some message but it is trimmed off.
" Event String: The DHCP/BINL service has determined that it is"
Do I have to have the DHCP server running on the same box? I would think not.
In either case is it best to turn off dhcp on the dsl/cable routers when setting up a domain controler and using it's dhcp?
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
Only one DHCP server can exist on a network, but it doesn't matter which one you use particularly. One advantage of using the router DHCP is that it can update hosts with new configuration info - your ISP's DNS and Gateway server addresses, for instance - when and if they change. One advantage of using Win2K's DHCP is that it can automatically update your DNS if the address of a host on your network changes. Since that's unlikely, I'd use the router for DHCP and disable the service in Win2K.
Try using dcdiag > dcdiag.txt to get it to write to a text file, then view the file. That should eliminate the truncation. You can also use dnscmd.exe to view dns records by zone and check that there is a DC record for the domain controller.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
I've never found a decent reference, despite running a Win2K server for years and having purchased several books on the system. It never worked right, and every Microsoft article I found by searching the KB was irrelevant or ineffective. I remain convinced, however, that making the DNS system work correctly is the key to making everything else work properly, and that remains a mystery. Dump WINS and the DHCP service if you don't have old computers on your network, and focus on making DNS work. Active Directory depends on it, and you can add back those services if you really want to later.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Roger Wright wrote: I remain convinced, however, that making the DNS system work correctly is the key
I definitly believe that is true.
Roger Wright wrote: Dump WINS and the DHCP service
Already done. Just had missed some clean up. The only old machine left can be shot or it is ok that it just gets to the outside world and a printer for guest users.
Thanks for the words of wisdom.
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
|
Thanks,
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
Hi, a friend of mine has a problem with his new scanner and windows xp. He told me that the first time that he plug a scanner to his system, its ask for a device driver. Then he install the driver successfully and could use it as normal. If he don't use the scanner and unplug for one hour and plug again it work fine too but the problem is when he unplug for 2 or 3 days and use it again, it always ask to install the device driver as the first time that the scanner plug to the system. I can't discover this problem and does any people have any idea with this problem?
|
|
|
|
|
Well, for any Plug and Play hardware, you always install the software FIRST, then plug the hardware in.
In this case, I'd probably start by unstinstalling the software and disconnecting the scanner. I'd then go to the manufacturer's site and see if there is an updated version of the software/drivers. Then I'd check to see if there are any known issues in their KB. Then I'd reinstall the software and LASTLY plug the scanner back in.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Thank you very much for your comment. I will try to do as your suggestion and check the website of the scanner vedor if they are post any KB article relate to this product.
|
|
|
|
|
Where is it? Technet won't cough up an answer, and even Google is stumped. That pesky router from my ISP doesn't block Messenger packets, and overnight someone loaded up the server with messages. I disabled the service this morning, but I know there must be a file somewhere that holds all the as yet undelivered messages received overnight. Any clues?
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
I recently had an interesting problem hit my system. I am running Windows XP Professional x64 with IIS 6.0 running, (mostly recognized as Windows 2003 Server). I say interesting now, but I was about to  !@#@!#@@! , loose it.
Here goes: Local web pages of any type, (why I did not say HTML), would not display on my system, or if they eventually did, it took up to 5 minutes to do so. When I would try to display what I was working on in Visual Studio 2005, and *.asp? pages, this would still happen. At times I also noticed that external websites were giving me problems, but those pages would normaly load, although slowly. Another thing I noticed was CPU usage was maxing out for long periods of time.
I finaly had had enough and called in Microsoft© Tech Support. After a total of 7.5 hours of running Live Meeting® the cause was finally discoverd. When I setup IIS 6.0, a componet TCP/IP ver 6.0 was also loaded, instead of the normal version. One of the techs was from their network department, and he was the one who found the problem. It seems that version 6 is a beta version and they are having reports of problems from this module.
So, if anyone out there is running this and / or just having web problems, this is a place to look.
Have a great day! 
DB_Cooper1950
|
|
|
|
|
Hi,
There is multithreading capabilities in IIS 5.1 but how do we enable and manage multithreading?
I would like to know the general steps to do so.
Or any weblinks describing multithreading management in IIS would be appreciated also
|
|
|
|
|
This is my recollection of some material that, IIRC, was in "Transactional COM+" by Tim Ewald.
All requests in IIS 5.x come into the inetinfo.exe process. This process has a pool of threads for processing requests. It works out whether any user code needs to be executed for a given request; if not the thread receiving the request simply locates the static content, serves it, and returns to the thread pool waiting for the next request. This thread pool is, IIRC, dynamically sized by IIS.
If user code does need to be executed, IIS checks the Application settings for Application Protection. If the Application Protection level is Low (IIS Process), the pool thread executes the user code directly. If set to Medium (Pooled), IIS accesses an instance of the IISWAM.OutofProcessPool COM+ component, which runs in a shared host process (dllhost.exe). This host process is also multithreaded. For an application marked High (Isolated), the application is given its own, separate dllhost.exe process.
For an ASP page, the worker thread that's processing the request then hands off the request to a different pool of threads used for executing ASP requests.
For ASP.NET, the file extensions used for ASP.NET are associated with an ISAPI extension, aspnet_isapi.dll. This extension starts up an aspnet_wp.exe process if one is not already running, which again has its own thread pool which manages requests. To configure the behaviour of the ASP.NET worker process, see machine.config.
In writing this response I referred to these articles: Optimize ASP and IIS by Decoupling Long-running Requests[^] and Diagnosing Problems in IIS[^]. I hope these are of use to you.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Can anybody help? I need to create a ROM image of a Pocket PC 2003 (2nd Ed) with 3rd party application installed and then flash the whole lot back to the ROM. I am trying to acheive a state whereby if the device (An Acer n30) is hard reset, all the setup and installed applications are there, ready to go.
Any helpful suggestions appreciated.
If anybody can do this as a professional job, please let me know.
Thanks.
Andy Brenton
|
|
|
|
|
The only way you can do this is to contact Acer and ask them to make a special build for you. I think this is going to be highly unlikely.
A better option is probably to investigate AutoRun from a storage card, and simply fit each unit with an SD card containing your program's installer. That's more-or-less what we do.
Actually we work mainly with Symbol hardware, sometimes Intermec and HHP. Symbol have drivers which copy files and parse registry files from specific flash file systems on hard reset. Intermec's built-in flash file store on some units acts like a storage card, so the AutoRun mechanism works there. HHP have a process that runs after cold boot which looks for and installs CABs stored in a particular persistent location.
Alternatively look for a device running Windows Mobile 5.0, which has persistent storage. You then no longer need to worry about the device hard resetting due to a flat battery. My experience with Symbol's Windows Mobile 5.0 devices is that it's actually very hard for the user to wipe the persistent storage.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Hello. I cloned WinXP Prof for 20 computers (with True Image). After clone network works about 1-15 minutes, computers disappear.
Thank you for attention!!!
|
|
|
|
|
Did you change the machine SID on the clones before you added them to the network? Google for "NewSID" and you'll find what I'm talking about.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
I changed SID before add to the network. I changed SID with NewSID, after that i add to the network. Network works 5-15 minutes, after that copmuter by computer disappeares.
Thank you for attention!!!
|
|
|
|
|
I've never run into the problem before. Hmmmmm.....
The only other thing I can think of is the network adapter auto-negotiating the link speed and duplex with the hub/router you're machine are plugged into, and getting it wrong. This isn't a one-time process, but something that is re-evaluated every so often. You might want to try going into the Properties of the Network Adapter and changing the Speed and Duplex options, from Auto, to the values expected by your hub/switch. Like 100Mb Full Duplex or 10Mb Half Duplex...
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
OK. I will do it. You know when i had installed WinMe everything works (i mean network). Why?
Thank you for attention!!!
|
|
|
|
|
Driver versions are different... If this is indeed the problem, it's probabyl because the negotiation code isn't implments properly in the driver.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Is the license for your copies of XP the "commercial open license".
If not I believe they get flagged. I have not bothered with cloning on XP so this is just a guess.
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
Before make the image for your XP installation use the sysprep utility from support tools to remove SIDs from the machines. This is the recommended by Microsoft.
|
|
|
|
|
I need to enumerate network resources from my service and for this i plan to use impersonation.
This is what i did.
LogonUser(username)
ImpersonateLoggedOnUser()
// do networking stuff
RevertToSelf()
when i perform these operations with username = Administrator, the networking code works fine but with
username = xxxx (which belong to the Administrators group), the networking code fails (GetLatError = 2).
What am i doing wrong here ?
As i see the username(xxxx) does not have a few access rights or privileges which the Administrator has to
enumerate network resources. any idea what are those rights or privileges ?
I tried with granting SeNetworkLogonRight to xxxx and it did not work.
any inputs will be helpful.
|
|
|
|
|
Hi, what is the difference between normal format and quick format partition in windows 2000 or windows xp pro?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
