|
Configure your firewall, which ever one you're using, to block the inbound and outbound ports that your applications are using.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Thanks, but where should i change setting. If i wanna block 1863 port and 5000 port?
Please tell how i can do this?
thanks again,
Muhammad Waqas Butt
waqasb4all@yahoo.com
|Muhamad Waqas Butt|
waqasb4all@yahoo.com
www.sktech.freewebspace.com
|
|
|
|
|
That depends entirely on the firewall you're using and where it's located. If it's installed on your machine, then you'd probably go into Control Panels to control it. if it's an external firewall, like in a router, there's usually a website in the router you can use to configure it. After that, look up what you have to do in the documentation of your firewall.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
I'm using Windows XP firwall. Can you tell how can i block ports in it?
|Muhamad Waqas Butt|
waqasb4all@yahoo.com
www.sktech.freewebspace.com
|
|
|
|
|
Have you done any exploring in it??
If the firewall is turned on, then the ports are blocked. you actually have to open ports in order to use them. On the Exceptions tab, this is done by either allowing all ports opened by an application (Add Program button) through, or by specifying specific ports (Add Port button).
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
hai
i want to block some specific URL from my browser
PLz tell me the steps Clearly
some of my doubt
1. possible from windows firewall
2. have to install third party firewall
if needed plz mention the name ans tell me how i will do setting
3.Tell me the solution any care how i can get my objective
janan
|
|
|
|
|
Edit the Hosts file so that the URL to be blocked points at your local loopback. Most (if not all) Anti-Virus and Anti-Spyware products monitor the hosts file and will warn of its change. Re-notify these products of the changes.
Windows firewall is better than nothing. There are plenty of Firewalls to choose from. For instance - Zone Alarm, and Tiny and so forth. Do a google search and compare them according to your needs.
As I referenced Anti-Virus and Anti-Spyware products, if you don't use then WAKE-UP and get them. Firewall (just the one), Anti-Virus (just the one), and Anti-Spyware (not limited to one) are ALL essential elements in your quest to a safe and secure computer system.
modified 1-Aug-19 21:02pm.
|
|
|
|
|
|
Hello,
I have an urgent question:
My application is a MFC MDI ActiveXControl Container and it crashes when the count of the "User Objects" of my application has reached the count of exactly 10000.(can be observed in TaskManager at column "User Objects" - count increases while starting my application).
How can I increase this count of "User Objects"?
Has anybody experience with that problem?
Thanks a lot....
Stefan
|
|
|
|
|
AFAIK, there's no way to increase that limit. Instead, it sounds like you have some kind of leak in your code. I've nver seen a USER Object count that high in any application. The largest User Object counts I've seen belong to CAD and 3D modeling packages, like Maya, and they don't come anywhere near 10,000 objects...
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
stberger wrote: My application is a MFC MDI ActiveXControl Container and it crashes when the count of the "User Objects" of my application has reached the count of exactly 10000
I'm not sure that xp has limite the number of user to 10000 or not. But try to check the data type of the variable in your code and check the scope that it could handle the value.
|
|
|
|
|
Hi, disk quota feature is allow admin to apply the specific quota for each user, not for the group. But why when disk quota is enable, the local administrator group is set to have unlimit quota by default? why disk quota can apply on local admin group but could not apply for the other group?
|
|
|
|
|
I have two Windows 2003 enterprise servers. One is front-end DNS, front-end exchange, and IIS. The other is a DHCP, back-end DNS, back-end exchange and local resource share server.
My goal is to block certain sites to keep employee's children from coming to the office and killing bandwidth with P2P downloaders and blogging sites.
I wish to do all this using no 3rd party software. I did this at home using nothing more than DNS and IIS but with Windows 2003 they have hardened security and moved things around from when I did it on Windows 2000 Advanced Server.
Thanks for all the help!
|
|
|
|
|
If you know the names of the sites you want to block then you can do it with a simple hosts file. You can push a new hosts file to people at login time to maintain it.
If you want to block specific P2P apps then you can use a firewall rule to block the ports needed.
Th biggest thing here though is that you seem to have a BIG lack of physical security and policy. If you have to worry about what your employees kids do then you have a management issue. Put a hard policy in place that makes the employee accountable for what gets done on their PCs and I bet you fix the 'issue' real fast. No matter what the employees kids should not have free use of the work PCs.
|
|
|
|
|
Actually, management in my company couldn't be much better. I'm not taking offence although I need to explain my company. My company is a home building company. I encourage my employees to bring their kids to work as it promotes my company. My office is actually themed as a house to match the company.
With the websites, I just wish to block the ones that require high bandwidth. Picture sites, video sites, and one is example is myspace.com.
Above you said I have a lack of security and policy. Policy was referencing the employees bringing thier kids, which I have explained as allowed. Security scares me though, I worked for Microsoft for 10 years and have a deep seated understanding of computers. I was the Head of the Exchange Center of Excellence and even spoke to Bill Gates himself, only once sadly. But as far as I know the only security I lack is an ISA server, do you see something else?
The only way to speed up a Macintosh computer is at 9.8 m/sec/sec.
|
|
|
|
|
ExpertComing wrote: With the websites, I just wish to block the ones that require high bandwidth. Picture sites, video sites, and one is example is myspace.com.
Then again you can do this by simply administering a hosts file that routes these sights to 127.0.0.1 and your problem is gone.
With respect to your situation, I fully understand the way you are running the company (giving it a home type feeling) and I like that. No worries there.
My only concern is that just allowing the children at the work place does not mean that you have to allow them access to machines that are used for work. If you want something slightly more manageable then why not supply a set of PCs just for the kids when they are there and manage them more tightly.
ISA would be a good idea but I have not found a simple way to block access to specific sites without buying some kind of add-on product. I run ISA in my house (SBS2000 system) and this is what I do. Weekly I run through the ISA web logs and take a look at the sites my kid if going to. I then decide what is OK and what is a no-no. I take the no-no sites and add then to a hosts file stored on the server. His log-in script is set to pull that file down when he logs on and form that point forward that site is blocked.
|
|
|
|
|
I forgot to mention that the computers the kids play on are thiers, or thier parents personal, self owned laptops. My problem isn't that the kids are online using the web, just certain web sites kill bandwidth, I have plenty it is just I want to keep it that way.
Also, alot of it is just I want to learn how...
The only way to speed up a Macintosh computer is at 9.8 m/sec/sec.
|
|
|
|
|
Since those laptops don't belong to you, its not a good idea to modify them. You're only other (and best) option is a firewall, and block those sites and ports.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
ExpertComing wrote: the computers the kids play on are thiers, or thier parents personal, self owned laptops.
In that case you really shouldn't be letting them onto the same LAN as your machines. Get a separate network for people with their own machines.
|
|
|
|
|
|
I don't want to modify those laptops, there is a way to do it on my server. I have done it before on my Windows 2000 Advanced Server just using DNS, but it isn't that simple in Windows 2003. I don't want to modify the host files either. DNS is the way to do it, the right way at least. I think I figured it out thinking more deeply in how DNS and the whole picture works. Give me a while to try it.
The only way to speed up a Macintosh computer is at 9.8 m/sec/sec.
|
|
|
|
|
I figured it out, this is what I did (and what I thought I did the first time.):
Create a forward DNS zone for the domain you are blocking.
Create just a CNAME for your server.
OPTIONAL: Create an IIS entry to say some sort of blocked page message.
The only way to speed up a Macintosh computer is at 9.8 m/sec/sec.
|
|
|
|
|
ExpertComing wrote: DNS is the way to do it, the right way at least.
No, it's not. Your internal DNS should not care about any addresses that it's not an authority for. You're turning your DNS server into a poor firewall that's difficult to maintain.
The "right way" is a firewall that can respond to blocking sites by both IP address or domain and other methods such as content ratings, keywords, ...
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
 I am unsure if this is the correct forum, and I am not much of a scripter.
I am trying to script changing the XP LPT port number from LPT1 to LPT3. I have been able to do this in a vbscript by changing the port details in the PNP0401 registry component. This is not a fail safe solution as some systems such as VM's use PNP0400 instead.
I have another script where I am trying to use WMI components to change the device but I am having no luck.
The script is either to run as a Windows Startup script or to be included as part of a MSI installtion.
Does anyone have any information on how best to control system devices, typically changes you can make manually in the Device Manager. I can't find any information on the internet.
Cheers
Darren Kimber
|
|
|
|
|
Why do you need to do this?
The registry entries are really more up to what the PNP detection system put in place when it ran and detected the ports. Personally I would not mess around with them.
Maybe if we know why you need this we could point out a better way.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
