|
I'm afraid I won't be able to help any further. You are implementing the objectdatasource control which is a control I'm not familiar with. you may want to take a look at this page[^] which shows a gridview/objectdatasource implementation. I have yet to familiarize myself with it.
|
|
|
|
|
How do I import my previous Microsoft Access database to my new SQL database? I have a feeling I will first have to convert it to some sort of comma deliminated platform and then only somehow get into SQL. Or am I being a moron ... again?
Peace.
--Rory
Every religion's trina tell us that every other religion's going down to hell! -- Rory Lewis 1999
|
|
|
|
|
Have you tried importing data using Import wizard/DTS?
- ashish
|
|
|
|
|
Try this
http://www.microsoft.com/technet/prodtechnol/sql/2000/Deploy/accessmigration.mspx
Ian
|
|
|
|
|
Hello,
I am using following code to call ASP.NET webservicemethod. When I put URL in browser, it works. But when I use MSXML2.XMLHTTP, it fails.
any clues?
CODE:
postUrl = "http://Server/VDir/MyWebService/NewService.asmx/MyMethod"
Set xmlhttp = server.Createobject("MSXML2.XMLHTTP")
xmlhttp.Open "POST",postUrl,false
xmlhttp.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
xmlhttp.send DataToSend
Response.Write(xmlhttp.responseText)
Appreciate your help
- ashish
|
|
|
|
|
Hi
I hve loaded a data table with values from a database. I want to insert these values into another table in database. How can we insert data directly from datatable into database.
Can anybody help me to solve this problem.
|
|
|
|
|
Are you just moving data from table1 to table2? Are there changes to the data in the datagrid before saving to table2? I'm just trying to figure out why you need the datagrid if you are just migrating data...
|
|
|
|
|
This doesn't have anything to do with ASP.NET. Try the SQL/ADO/ADO.NET forum.
only two letters away from being an asset
|
|
|
|
|
Is it possible to "Enable = false" on all a pages ASP.NET controls with a single command or loop?
As I would like to see if a certain criteria is met (such as being flagged "completed") and if so lock the input controls(which is all controls on that page) from accepting input.
I would like to do this in a fasion whereby I don't have to add every new control added to the page to a big list inside an if statement... if possible.
Thanks.
|
|
|
|
|
Each Page exposes a Controls collection. You could loop over that. e.g.
foreach(Control ctrl in this.Controls)
{
ctrl.Enable = false;
}
|
|
|
|
|
Colin's suggestion is a good one. I'd add another - you could put all your controls inside a Panel object, then set the Panel's Enabled property to true or false. Something like this:
<%@ Page Language="C#" %>
<script runat="server">
void CheckboxChanged(object o, EventArgs e)
{
panel2.Enabled = Checkbox1.Checked;
}
</script>
<html>
<head>
<title></title>
</head>
<body>
<form runat="server">
<asp:CheckBox id="Checkbox1" runat="server"
AutoPostBack="true"
Text="Enable the panel"
OnCheckedChanged="CheckboxChanged"
/>
<br /><br />
<asp:Panel id="panel2" runat="server" enabled="false"
Width="400" BackColor="#EFEFEF"
Style="padding: 4px;"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1">
<asp:TextBox runat="server" text="some textbox" />
<asp:DropDownList runat="server" >
<asp:ListItem text="Item1" />
<asp:ListItem text="Item2" />
<asp:ListItem text="Item3" />
</asp:DropDownList>
<asp:Button runat="server" text="some button" /><br />
</asp:Panel>
</form>
</body>
</html>
|
|
|
|
|
Hello,
When I bind a dataset to GridView (.NET 2.0) which has no record, the GridView control is not visible at that time.
Is there any way where in I can persist the visibility of GridView even in case of no data in dataset?
Regards,
Vipul Mehta
Regards,
Vipul Mehta
Software Engineer
Chenoa Information & Software Services Pvt Ltd
|
|
|
|
|
You can use the EmptyDataText property to set a message that will be displayed.
only two letters away from being an asset
|
|
|
|
|
Hi,
I'm having a rather curious problem. I have a GridView (ASP.NET 2.0) that has 3 image fields (commands.) One of those fields deletes the row.
First, the command name was "delete" and so I used the GridView1_RowDeleting event method. I put the code to delete the row from the database there. Then, I changed the command name to "del" and used the GridView1_RowCommand method to catch the command and perform the deletion.
Now, after deleting the row, I would like to reload the updated table from the database and bind it again with the gridview. So I use this:
<br />
GridView1.DataSource = sessionParams.SiteDS.Tables["Users"];<br />
GridView1.DataBind();<br />
sessionParams is a class holding all the Session variables amd SiteDS is the dataset holding the tables of the website.
Now the problem: whenever I click to delete, the row after it also gets deleted, and if it's the last row I get an exception that the index is not valid. That's because the delete command is fired twice, the first time the correct row gets deleted and then for some weird reason, the event is fired again and the row after it gets deleted (since it has the same index now.)
What I noticed afterwards was that this only happens when I use the code that i mentioned above. That is, if I don't do the databind thing, only one row is deleted. However, in this case, the gridview is not updated 
So, what is the problem here? Why is the event fired twice?
Thanks.
Talal
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning."
--Rich Cook
|
|
|
|
|
Where do you put your sample code to rebind the GridView control? Have you tried it in the PreRender event?
|
|
|
|
|
Hi,
The binding code is in a method that is called from the RowCommand or the RowDeleting click event method. If I put the binding code in the PreRender method, wouldn't it be executed before control passes to the event methods?
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning."
--Rich Cook
|
|
|
|
|
There is something I noticed that is worth mentioning.
This double event firing only occurs when the ButtonField of the GridView is an Image. I have another GridView with ButtonFields shown as links and the event is fired once.
Weird?!? 
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning."
--Rich Cook
|
|
|
|
|
Hi,
I am using asp.net 2.0. In this,i am using Cross Page Posting. From the second page, i am trying to reference a control (Label) in the prevoius page using 'PreviousPage' property.
Here, in the first page, that Label control is placed within the "asp:Content" tag. (ie I am using MasterPage's ContentPlaceHolder).
Page.PreviousPage.FindControl("lebelid") method return null.
In case of normal page ( without Masterpage), it works fine. Can anyone help me in this? Thanks in advance.
Regards,
Jay
|
|
|
|
|
Because the Label is placed in the Content control, that also means it is later put in the ContentPlaceHolder control which is a naming container. So you need to get reference to this control fist before accessing the Label control.
|
|
|
|
|
I am tried with refering the NamingContainer before refering the actual control (Label), which is placed within that NamingContainer. It also gives me the output null.
In my previous page, the Label control present within the tag,
<asp:Content ID="Content5" ContentPlaceHolderID="BodyContent" Runat="Server">
</asp:content>
In my second page (using same masterpage) code behind file, i am refering like this,( in Page_Load event)
ContentPlaceHolder myContent = (ContentPlaceHolder)Page.PreviousPage.FindControl("BodyContent");
Still it returns null.
-- modified at 0:05 Saturday 19th August, 2006
-- modified at 0:06 Saturday 19th August, 2006
Regards,
Jay
|
|
|
|
|
hi,
Is it possible to bind the datagrid with the database table rows as columns. In ASP.NET2.0 there is a control called "Details view". i need exactly the same style in ASP.NET1.1.
That is i want the table headers to be in the first column and the row in the next column.
I will the data by a sql statement with select statement.
eg: select ssn,fname,lname where ssn = 1234
|
|
|
|
|
|
I have a vb.net web page with a dropdownlist - the page displays a customer record. The options in the dropdownlist are hard-coded.
I'd like to have the dropdownlist show the value saved in the database when the user pulls up a customer record.
However, when I bind the control to the dataset (default view 0) the dropdownlist displays the value from the database on several lines eg:
o
p
e
n
instead of "open" on one line.
Should I be setting the value of the dropdownlist a different way other than using the databinding ?
Thanks
|
|
|
|
|
Can you show your code here, it would be helpful to reply.
thanks
Naveed Kamboh
|
|
|
|
|
I'm using vb.net. I used the databinding 'wizard' to set the source (eg I click on the control then click on the elipse button in the databinding property)
After selecting the column from the default view, visual studio sets the datasource as - DataBinder.Eval(Dscustomerdetails1, "Tables[customers].DefaultView.[0].type")
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
