|
I'm looking for help on how to install a screen saver created from the VS 2005 Screen Saver kit, more specifically, install the screen saver programmatically and also install the .net 2.0 framework as well.
I've created a screen saver for my relatives back home using the screen saver kit included with VS2005, my relatives are not pc literate, anyways, I need to have this install programmatically when they click an .exe plus also checking that they have the .net 2.0 framework installed, if it isn't then it should install the framework too ...
Any help would be great, I've looked in the articles and I didn't find anything so I thought I'd post here.
Code, links to code, links to articles would also be fine ... I'm a student still learning if that helps you to help me.
Thanks,
Xaverian
|
|
|
|
|
You can use Process.Start() method to invoke the installer from your code. Most installers support the "quiet mode" usually by adding a "/q" or a "-q" parameter. This way the installer don't display a user interface and installs itself -as mentioned- quietly.
Regards ![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
|
|
|
|
|
Thanks -
But I don't understand what you just said ...
|
|
|
|
|
Well, to install anything you program got two choices:
1- Make a deployment project -from the new projects window-, there you can specify what to install from your screensaver project, and to check/install DotNet framework.
2- Write the code to copy your files yourself. If you choose this hard way -that's what I thought of when you said programatically-, you need to call the DotNet installer. Something like this:
Process.Start("Setup.exe", "/q");
This way the DotNet framework setup will try to install itself without showing any screens. Of course if you want to copy your exe file to the hard desk you can simply use
File.Copy("MyOldPath.exe", "MyNewPath.exe", true);
Sure the second way is much harder, but some people got reasons to use it. If you just want to install your project and the DotNet framework -if needed-, follow these steps:
1- File => New => Project
2- Other Project types => Setup and Deployment => Setup Project
3- Right click on the setup project's name => Properties
4- Prerequisite button => Check ".Net Framework 2.0" and "Microsoft installer 3.1" from the list and check on "Download prerequisites from the same location as my application" radiobutton.
5- Right click on the setup project's name again => Add => Project output => Choose your screensaver project and click OK.
I hope it was clear this time.
Regards
|
|
|
|
|
I followed your instructions all the way to #5 ...
[QUOTE]Right click on the setup project's name again => Add => Project output => Choose your screensaver project and click OK[/QUOTE], when I get to this point, there are two empty dropdown boxes with no way to navigate to my project so I can add it as project output.
I was also trying to use the "ClickOnce" deployment method as I have space on a server here at school to use, thought that might be easy for them to use to install and run the app, however when trying to use that method the "ClickOnce" won't grab the .scr and install it as a screen saver only in the Start > Programs > etc. etc. and you have to manually click on it to run. Doh!
Any method is fine to use as long as I make it simple for them ... another question that pops up then, if using the method you described with making a new "Setup Project", when this installs, will it install it directly as a screen saver? and how would it do that, or do I have to provide more code somewhere to make it perform that action?
I hope this was all clear ...
Xaverain
|
|
|
|
|
The last step didn't work because you crated the new project in a new solution . In the new project dialog you should have chosen "Add to solution" in the ComboBox to the bottom of the dialog box.
About installing your Screensaver, follow these steps in your new setup project -in a new solution like you did-:
1- Open "My Computer" => Go to your Screensaver's output folder => Copy the exe to your new setup project's folder and rename it to "MyFile.scr" instead of "MyFile.exe"
2- Back to Visual Studio => Right click on the setup project's name => View => File system
3- Right click on "File system on target machine" => Special Folder => Windows folder.
4- Right click on the new folder => Add => File => Browse to your scr file.
5- Do the prerequisite as mentioned before.
This should do it, but you got to read more about setup and deployment. I always suggest searching the articles. I hope it works for you this time.
Regards
|
|
|
|
|
If I use the "Download prerequisites from the same location as my application" and place everything on a CD for them, where do I place the prerequisites or how do I include them with the setup project?
|
|
|
|
|
First: Did you follow the second set of instrucstions successfully?
Second: The entire output of your setup project is placed in a folder named debug or release -accodring to your configuration-. In that folder you should see subfolders containing each of your prerequisites. Just copy all the contents of the debug/release folder to your CD, and on the user's machine tell them to click on the Setup.exe file.
PS.
Of course you should test it on your machine first, Don't you think? Also don't forget to uninstall the screensaver from your machine after the test.
Regards
|
|
|
|
|
I did follow the instructions, and I found everything in the DeBug folder as you suggested ... that is slick!
I tested it and uninstalled it ... that worked too, BUT ...
How do I make the screen saver being installed the default screen saver without making my relatives right click on the desktop, select properties, then screen saver, etc ...
Isn't there a way to do that for them?
On a side note, I am going to do some additional reading on creating "Setup Projects" after all this. Do you know of any good books, with examples?
Perhaps an article on deploying the Screen Saver kit should be written for CodeProject, for both the CD option and using the ClickOnce stuff too.
Anyways, thanks for the help thusfar, I appreciate it, just one more step to go! I await your answer 
|
|
|
|
|
Alright. I'm going with you to the end.
There is a registry key in windows that you got to change. The key is "HKEY_CURRENT_USER\Control Panel\Desktop". Inside it there is a value called "SCRNSAVE.EXE". If this value doesn't exist you should create it, if it does you should give it the value "C:\windows\MyFile.scr". To do that while you install your program you have to do a custom action that is done while installing the software.
1- Create the setup project in the same solution as your screen saver solution
2- Add the primary output of your screensaver project to the windows folder you create in the file system panel
3- Right click on the setup project's name => view => custom actions
4- Add a new custom action and choose the primary output of your screensaver project
5- In the screensaver project add a new item => installer class
6- In the Installer1.cs overide the Install() method.
7- In that method alter the above mentioned registry key
8- Don't hardcode the text "C:\windows" as the path. Rather use
Directory.GetParent(Environment.SpecialFolder.System);
Maybe they installed windows in another partition than C.
PS.
I've discovered a much easier way to install your screensaver. Just give your relatives the scr file and tell them to Right click on it => Install. This will directly install it and set it as the default screen saver. Also tell them not to delete the scr file BTW, as it's not copied to the windows directory.
Regards
|
|
|
|
|
I got as far as Step #4
When I view the custom actions, there are four folders there; Install, Commit, Rollback, and Uninstall as well as the top node "Custom Actions". Right clicking on anyone of those items brings up a box and I have four additional folders to choose from, I have to select one of the folders in order to enable the "add output" button ...
Question, which folder do I select in the pop-up box, and wich node while viewing the custom actions do I select or do I select the top node "Custom Actions"?
I think I going to create an article for others after all this ... LOL
|
|
|
|
|
Actually you should right click on any node => Add custom action. Then follow the rest of the steps.
Regards
|
|
|
|
|
Ive created the Install() file and I must have missed something, here is my code ...
namespace ScreenSaver1
{
[RunInstaller(true)]
class Installer1 : Installer
{
const string _screenSaverValue = "SCRNSAVE.EXE";
public Installer1()
{
}
public override void Install(System.Collections.IDictionary stateSaver)
{
base.Install(stateSaver);
RegistryKey theRootKey = Registry.CurrentUser;
RegistryKey theControlPanel = theRootKey.OpenSubKey("Control Panel");
RegistryKey theDeskTopKey = theControlPanel.OpenSubKey("Desktop");
if (theDeskTopKey.GetValue(_screenSaverValue) == null)
{
string valName = _screenSaverValue;
object testValue = Directory.GetParent(Environment.SpecialFolder.System.ToString()) + "ScreenSaver1.scr";
RegistryValueKind valKind = RegistryValueKind.String;
theRootKey.SetValue(valName, testValue, valKind);
}
}
}
}
Everything else works fine, just not setting the registry value ...
|
|
|
|
|
It's one simple mistake -you can post it in the subtle bugs forum BTW -. You've written
theRootKey.SetValue(valName, testValue, valKind);
... while it should have been
theDeskTopKey.SetValue(valName, testValue, valKind);
as the value is under the "HKEY_CURRENT_USER\Control Panel\Desktop" key not the "Current User" root key.
I hope it works.
PS.
the line
if (theDeskTopKey.GetValue(_screenSaverValue) == null)
tests only if the user doesn't have any screen saver chosen. If they have another screen saver chosen this value will not be null. Rather it will be the path to the other screen saver. You should always SetValue() even if it wasn't null.
Regards ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
|
|
|
|
|
I've made the changes and still I have nothing ... it won't create the value within the Key ... everything else works though.
To bad I can't just send you the entire project to look at ...
Thanks for all your help, you've definately went further to help me than I ever anticipated. I really appreciate your help! I've learned several things from this, thus far ...
Xaverian
|
|
|
|
|
I am searching for the code to export the datagrid columns in to the excel sheet. Most of the code i have seen are reading the each value one by one from the datagrid or dataset and writing in to excel sheet. But in Asp.net, there is an easy way to do it. Is there is any easy way to do in windows application also. Thanks to all.
|
|
|
|
|
You can export your data as Xml files, or comma delimited files which are easily read by Excel among other programs as well.
Regards
|
|
|
|
|
There are plenty of articles on CodeProject that will help you.
|
|
|
|
|
I have one openFileDialog1.
How to get the name of the selected file.
But not the all path.
Exp:"C:\NewFolder\TextFile.txt".
Just "TextFile.txt"
Vasildb
|
|
|
|
|
You can use a Path object from the Sytem.IO namespace.
string fileName = Path.GetFileName(OpenFileDialog1.FileName);
Path.GetFileName[^]
FileDialog.FileName[^]
Paul Lyons, CCPL
Certified Code Project Lurker
|
|
|
|
|
hi,
use Substring and LastIndexOf functions to get the required value;
any string supports these methods.
regards.
|
|
|
|
|
That's, most certainly, doing it the hard way and in some cases unreliably.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Thnx Dave ,for correction.
|
|
|
|
|
That should never be done. Prone to too many errors.
|
|
|
|
|
Hi,
Can some one please let me know how can I use an API in my application.
Thanks:
Rakesh
Rakesh
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
