|
This is not a web service, a web service has no UI
You can't do it. If you refresh, it will send a request to the server. If the server then redirects to another page, that's another question.
Or, did I misunderstand you ?
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Is there any API in the .NET framework that will give me the number of processors and/or processor cores there are?
I'm looking to enable my program to use multiple processors in some methods. It will create as many threads as there are cores and use each one equally in certain methods.
-- modified at 22:33 Friday 5th January, 2007
█▒▒▒▒▒██▒█▒██
█▒█████▒▒▒▒▒█
█▒██████▒█▒██
█▒█████▒▒▒▒▒█
█▒▒▒▒▒██▒█▒██
|
|
|
|
|
Though I may be wrong but I don't believe you have any control, nor would you want to, as to which processor/core to use. I remember reading a paper about this with the jist being that routing tasks to the processors/cores is a very complex algorithm that wiser people then I spend many years perfecting (or at least trying to).
only two letters away from being an asset
|
|
|
|
|
Mark Nischalke wrote: Though I may be wrong but I don't believe you have any control, nor would you want to, as to which processor/core to use.
Well each core will be utilized at 100% so I thought that if I had two threads and each thread is using all available CPU time that the OS would move one of the threads to another core or processor.
For example I have a loop that iterates through a very large array and acts on each array item independently. If there are more cores available I could divide the loop so the first thread will work on the first half and the second thread will work on the second half, depending on how many cores there are it will be divided into 4 or 8.
█▒▒▒▒▒██▒█▒██
█▒█████▒▒▒▒▒█
█▒██████▒█▒██
█▒█████▒▒▒▒▒█
█▒▒▒▒▒██▒█▒██
|
|
|
|
|
I can't find what I'm looking for, but:
Look in System.Diagnostics for detecting multiple CPU's
Look at System.Threading.Thread for setting thread Affinity
Ignore what I said about _AppDomain, it's not there.
However, what I've read suggests using the existing .NET threadpool, and let .NET do what it can about balancing your load.
|
|
|
|
|
Okay, I think I was wrong. I can't find any of the references I thought I would.
Setting thread affinity in .NET does not do what I said. Nor have I found any mention of how to get the System attributes that include how many CPU's, or the speed.
|
|
|
|
|
I found it, System.Environment.ProcessorCount.
█▒▒▒▒▒██▒█▒██
█▒█████▒▒▒▒▒█
█▒██████▒█▒██
█▒█████▒▒▒▒▒█
█▒▒▒▒▒██▒█▒██
|
|
|
|
|
Actually, there is. And, I believe, you can set thread affinity, which specifies which real or virtual CPU your thread uses. I don't have the docs with me here now, but I'm pretty sure I just read this.
It's either in the Application namespace, or the _AppDomain namespace.
|
|
|
|
|
Hi CC#,
Starting with .NET 2.0 there is Environment.ProcessorCount
I dont know of any simple way to get more specifics (cores vs chips)
similar threads will get distributed over processors automatically, you would not
have to care about the details, unless you want maximum performance in special cases
such as two threads of type A plus two threads of type B running on 2 processors
(could by itself result in AA+BB or AB+AB which may behave slightly differently; in that
case processor affinity can be set with Thread.BeginThreadAffinity).
It may not be harmful at all to have more (identical) threads than there are processors,
so you might consider using 2 or 4 threads all the time, independent of processor count.
(Could be useful if, e.g. you also want to run on .NET 1.1)
Regards,
Luc Pattyn
|
|
|
|
|
Thank God Luc was here. Although I knew I had just read about all of this, I could not for the life of me find it.
|
|
|
|
|
Thanks, I got it.
█▒▒▒▒▒██▒█▒██
█▒█████▒▒▒▒▒█
█▒██████▒█▒██
█▒█████▒▒▒▒▒█
█▒▒▒▒▒██▒█▒██
|
|
|
|
|
I have a form which contains a tab control, which contains two tab pages.
On each tab page, there is a DataGridView, bound to it's own DataTable.
In the RowsAdded event handler for both DGVs, when the first row is added, I resize the columns to fit the data. My handler looks something like this:
private void dgvAllEvents_RowsAdded(object sender, DataGridViewRowsAddedEventArgs e)<br />
{<br />
...<br />
dgvAllEvents.AutoResizeColumn(0, DataGridViewAutoSizeColumnMode.DisplayedCellsExceptHeader);<br />
}
This code works fine for the datagridview that is visible - that is, on the selected tab. However, the column does not get resized on whichever dgv is NOT visible - the tab page that is not selected.
The event is getting fired, I have confirmed that. But the column is not resized when the AutoResizeColumn method is called.
Is there an optimization here that prevents resize from being executed if the column is not visible?
Thanks for any insight you have here.
|
|
|
|
|
JoeRip wrote: Is there an optimization here that prevents resize from being executed if the column is not visible?
In the resize event handler check to see if the column is visible and if it isn't then return.
█▒▒▒▒▒██▒█▒██
█▒█████▒▒▒▒▒█
█▒██████▒█▒██
█▒█████▒▒▒▒▒█
█▒▒▒▒▒██▒█▒██
|
|
|
|
|
No, I think you misunderstand. I don't WANT to be optimal. I'm asking if the reason that my column isn't getting resized is that I am running into some existing .NET optimization.
|
|
|
|
|
I recall having seen several similar messages on DGV recently.
Seems to me there are some bugs...
Luc Pattyn
|
|
|
|
|
Those were probably me . I've been spending a lot of time in the DGV lately.
|
|
|
|
|
Hi,
I am using the Windows.Forms.Webbrowser component to display some text and graphics in my application, as it makes formatting quite easy, and I need flexibilty here. Everything that goes into it is set directly via the Code, not downloaded elsewhere.
As I need some interaction with this component, I have to use Javascript, which works fine so far, except one point: If the user has it disabled in Internet Explorer settings, it won't work in the component either.
Is there a way to programmatically allow its own application to use scripts? It should be, I guess, and I googelt a lot, found something with SecurityManagers etc, but I mussed have missed the point 
So any help or code snippet is welcome 
Thank you very much
Oh, and if you happen to know how to reference graphics from the included project's ressources instead of the program directory via the img-tag... would be a nice feature, too...
Tired of searching, frustrated of not finding ...
Thank you so much,
Eiko
|
|
|
|
|
Hi,
I successfully use the string.replace function.
Newstring = oldstring.replace(“*”,”~”)
Now I want to count the number of replacements made.
Thanks in advance!
Kermit
|
|
|
|
|
Hi,
String.Replace() or any other method wont tell you, but you could try a loop
int startPosition=0;
int n;
for (n=0; ;n++) {
startPosition=oldstring.IndexOf(searchString, startPosition)+1;
if (startPosition<=0) break;
}
before performing the Replace.
Luc Pattyn
|
|
|
|
|
Perhaps it can be done using a RegEx replace and a delegate. That would give you the opportunity to do something for each replacement.
A simple way (but not so effective if the string is large) is to create a string where you remove the character, and compare the lengths:
int cnt = oldstring.Length - oldstring.Replace("*", "").Length;
---
Year happy = new Year(2007);
|
|
|
|
|
before doing the replacement you could use RegEx.Matches(InputString,SearchPattern).Count.
BTW: RegEx.Replace is also a good method to do string-replacements.
- walter
|
|
|
|
|
Ok, I have to admit that I am stuck here.
My apps form has an icon set for it but I am tired of the compiled exe file not showing that Icon when I view the file in Windows explorer.
The problem is I can't seem to find anything that is really cut and dry on this. I see some stuff that seems to say you can't do it with the IDE and need to use the command line compiler but I have a hard time believe that...
Any takers out there?
I can't believe I am stuck on something so trivial...
|
|
|
|
|
Open the properties pages for the project and take a look under the Application tab (assuming you're using 2005), there should be an Application Icon property.
If you're using 2003 it's a similar thing in the Properties pages for the project.
|
|
|
|
|
Oh man  I can't believe I looked right at that and missed it.
Thanks.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
