|
I think you need to look up CBT hooks and how to use them
Nish
Regards,
Nish
Native CPian.
Born and brought up on CP.
With the CP blood in him.
|
|
|
|
|
Hi, my drawing application wants to display the color in-use in the status bar, how can I do that?
|
|
|
|
|
GetStatusBarCtrl().SetBkColor( COLORREF cr );
Nish
Regards,
Nish
Native CPian.
Born and brought up on CP.
With the CP blood in him.
|
|
|
|
|
It changes the whole status bar to the color specified. How to change a specific pane of the status bar? Thanks.
|
|
|
|
|
I'm sure the status bar class I used to do this years ago came from CP so have a look on the site. You need to create a class that overloads the status bar to do this.....
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
Hey!!
Can someone give me a good site that tackles tutorials
about the C-Language preprocessors....
e.g. IFDEF, UNDEF, IFNDEF, etc...
|
|
|
|
|
Rule #1: the preprocessor sucks - avoid using it
Rule #2: See Rule #1.
The preprocessor is evil, avoid it if you can.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
The MS generated code seems to use it a good bit
Nish
Regards,
Nish
Native CPian.
Born and brought up on CP.
With the CP blood in him.
|
|
|
|
|
Nish [BusterBoy] wrote:
The MS generated code seems to use it a good bit
Stroustrup says use of macros usually indicates a bad programmer or a bad design. I guess this proves him right.....
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
Christian Graus wrote:
Stroustrup says use of macros usually indicates a bad programmer or a bad design. I guess this proves him right.....
ROTFLMAO
Regards,
Nish
Native CPian.
Born and brought up on CP.
With the CP blood in him.
|
|
|
|
|
Christian Graus wrote:
Stroustrup says use of macros usually indicates a bad programmer or a bad design. I guess this proves him right.....
Yes I've read his book. But for my case, I code a set of single code for two kinds of different machines, I have to do with it:
in declaration:
#if MACHINE == TYPE_A
CMyStack m_ctrlStk[10];
#elif MACHINE == TYPE_B
CMyStack m_ctrlStk[3];
#endif
in .cpp:
#if MACHINE == TYPE_A
for(i = 0; i < 10; i++)
#elif MACHINE == TYPE_B
for(i = 0; i < 3; i++)
#endif
{
m_ctrlStk[i].Morph();
}
Maxwell Chen
Lets make bugs better!
|
|
|
|
|
See, I would just use a vector.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
Just like the #ifdef _AFXDLL trick in VC++,
#ifdef _AFXDLL
InitXXX();
#else
InitXXXStatic();
#endif
In my case, even the I/O of the machines are different. Thus:
enum _IoAddress {
#if MACHINE == 1
enACSwitch = 0x001,
enRelayMaster = 0x018 // and many many other I/O addresses..
#elif MACHINE == 2
enACSwitch = 0x093,
enRelayMaster = 0x071
#endif
};
Then I can code once, benefitted everywhere:
PLC_SetOutput(enACSwitch, bPowerOn);
PLC_SetFlag(enRelayMaster, bPause);
// ......
Maxwell Chen
Lets make bugs better!
|
|
|
|
|
Stroustrup says a lot of things that I don't agree with. This being one of them.
Tim Smith
I know what you're thinking punk, you're thinking did he spell check this document? Well, to tell you the truth I kinda forgot myself in all this excitement. But being this here's CodeProject, the most powerful forums in the world and would blow your head clean off, you've got to ask yourself one question, Do I feel lucky? Well do ya punk?
|
|
|
|
|
I avoid using it as much as possible, but do you think that it is ever useful and that it has its uses?
For example, the SAFE_RELEASE macro for COM interfaces:
#define SAFE_RELEASE(ptr) if(ptr) {(ptr)->Release(); ptr = NULL;}
Have you ever found any uses for macros, for some reason or another, C++ code would just not be a good solution?
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
kilowatt wrote:
For example, the SAFE_RELEASE macro for COM interfaces:
Any macro that takes a variable is suspect, and a debugging nightmare.
kilowatt wrote:
Have you ever found any uses for macros, for some reason or another, C++ code would just not be a good solution?
At work I've written some common code as macros after much argument for an inline function. Personally I've used them in one project, a debugging tool where a macro was the only option, because it is able to report the file name and line number in which the trace command was written. A function obviously would not expand in place and therefore not work as I would desire.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
Christian Graus wrote:
Any macro that takes a variable is suspect, and a debugging nightmare.
You are definitely right about that. Debugging can be a nightmare, especially when you have a macro that spans across a couple of lines.
In a code generator that I wrote, we use a macro to properly thunk the Ansi/unicode conversions which helped make the generated code more readable and since no one was supposed to edit those files by hand, we felt fairly safe using the macros there. However, the debugging of the macro was a little difficult, we usually resorted to cut and paste (which sucked!)
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
kilowatt wrote:
For example, the SAFE_RELEASE macro for COM interfaces:
Use smart pointers instead. Most of the time there are alternatives and where an alternative exists like using inline functions etc there is no excuse for using preprocessor. My 2c
|
|
|
|
|
Christian Graus wrote:
The preprocessor is evil, avoid it if you can.
Evil?
Let's say you are using VC6, since VC7 isn't really in that widespread use, then the only way to fix some bugs in Microsoft's "interpretation" of the C++ language is to use the preprocessor (f.ex. the age-old #define for if(0){}else for). Anything that helps fix Microsoft bugs must surely be not from the dark side. 
It's also the only way you can:
- do portable include file protection
- implement
assert
- stringize a (type-) name
- Select the right library to link with automagically, especially when you have got six different possible CRT models (single-threaded, multi-threaded, multithreaded using CRT from DLL, and then debug and release versions of these three)
- ...
There is of course ways to use the preprocessor for the purposes of the dark side, MFC message maps comes to mind, but say the language feature that can't be misused.
/Mike In the hands of the wrong person, even see-hash can be dangerous... I think...
|
|
|
|
|
Mike Nordell wrote:
do portable include file protection
That much is true.
Mike Nordell wrote:
implement assert
Wrong. The std library provides assert, there is no need to impliment it yourself.
Mike Nordell wrote:
stringize a (type-) name
True. When would you want to do this, except in a debug tool, which I've already said I have done myself using macros ?
Mike Nordell wrote:
There is of course ways to use the preprocessor for the purposes of the dark side, MFC message maps comes to mind, but say the language feature that can't be misused.
True. Now list the language features that Stroustrup says are usually a sign of bad design or bad programming. I use macros, sparingly. I find a lot of people over-use them and usually they should take the advice of the person who wrote the language, and use const variables and inline functions instead.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002
|
|
|
|
|
Christian Graus wrote:
Wrong. The std library provides assert, there is no need to impliment it yourself.
However true that statement is, I'm not wrong. The only way one can implement assert is by using the preprocessor (macro facility).
stringize a (type-) name
True. When would you want to do this, except in a debug tool, which I've already said I have done myself using macros ?
I've used it in a few places where I need the stringized typename to create factories.
Now list the language features that Stroustrup says are usually a sign of bad design or bad programming.
Ehhh, macros? 
I find a lot of people over-use them and usually they should take the advice of the person who wrote the language, and use const variables and inline functions instead.
The last years I've experienced a decline in the use of macros, and more and more I've seen templates, integral constants and inline functions used.
Unfortunately the (probably) most widely used header files on the planet makes our lives problematic if we try to name something e.g. SendMessage.
|
|
|
|
|
Christian Graus wrote:
Rule #2: See Rule #1.
That is the best way to state it.
But there are places where they are valuable
1. Adding __LINE__, __FILE__ tracing information in the code.
stuff like,
#define MYTRACE(x) TraceF(__FILE_, __LINE__, x);
2. #ifdef DEBUG stuff is usefule
These are the only two places where I ever use preprocessor.
I hate code where I see stuff like
#define _NOIMPL_ STDMETHOD(QueryInterface)(REFIID , void**) \
{ \
return E_NOTIMPL; \
}
|
|
|
|
|
Read MSDN
Best regards,
Alexandru Savescu
|
|
|
|
|
I've made a menu using a Window, but i need to know how to get the icons from the toolbars. 
|
|
|
|
|
You mean you want to add icons to the toolbar, don't you?
Nish
Regards,
Nish
Native CPian.
Born and brought up on CP.
With the CP blood in him.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
