Re: Multi-version compilation - C# Discussion Boards

RichTextbox Control Header and Footer Filtering

Riaan Booyzen4-Mar-07 23:07

4-Mar-07 23:07

Hey there.

We are developing a system for contract management. Now, we generate a document with clauses selected by the user (for that document). For each clause that we add to our document, the headers and footers of the richtextbox is put into place, thus eventially when we save the document, you can imagine the complications.

Is there a way to filter and delete the headers and footers of the clauses when we load them into the document textbox? Or is the only solution to allow formatting only in the document and not on clause creation level.

Thanks, help is greatly appreciated Smile | :)

Multi-version compilation [modified]

joputaidilico4-Mar-07 23:06

joputaidilico

4-Mar-07 23:06

Hi, as all we know there are at least 4 different versions of .NET framework.

is there any internal IDE constant, that defines wich version of the framework
is expected the IDE to build for?

Motivation:
It's very common having various versions of the framework living in the same machine.
The IDE seems to build compatible binaries with the newest framework installed on system, thus coppying the sources on another machine, makes impossible to compile the code, without, changing lots of lines of code..

COMMON valid compatible CODE

#if NETFW_VERSION_1_1 1
valid code for 1.1
#else
#if NETFW_VERSION 2_0
valid code for 2.0
#endif

COMMON valid compatible CODE

-- modified at 11:43 Monday 5th March, 2007

Re: Multi-version compilation

BrianShields4-Mar-07 23:23

BrianShields

4-Mar-07 23:23

You're looking for '__CLR_VER' - check http://msdn2.microsoft.com/en-us/library/b0084kay.aspx. I don't believe you can change the framework you're linking to without switching compilers though.

Re: Multi-version compilation

joputaidilico5-Mar-07 1:24

joputaidilico

5-Mar-07 1:24

yes! that's perfect, but seems that constant is not yet defined inside a C# or VB.net project.

Is there something similar when using c# or VB.net?

Re: Multi-version compilation

Dave Kreskowiak5-Mar-07 4:55

Dave Kreskowiak

5-Mar-07 4:55

First, you're in the wrong forum for asking questions.

Second, no there is no constant in C# or VB.NET that defines which version of Visual Studio and hence which version of the .NET Framework your compiling against.

You can NOT switch compilers in Visual Studio. The IDE is very dependant on a specific version in order to work. If you want to switch the compilers, you'll have to compile your application entirely from the command line, specifying fully qualified paths to which version of the .NET Framework you want to use to compile your app.

Dave Kreskowiak
Microsoft MVP - Visual Basic

Re: Multi-version compilation

Ed.Poore5-Mar-07 2:56

Ed.Poore

5-Mar-07 2:56

Wrong forum
;)

Re: Multi-version compilation

Luc Pattyn5-Mar-07 13:34

Luc Pattyn

5-Mar-07 13:34

Hi,

I have isolated the relevant differences between 1.1 and 2.0 and have put them
in separate classes, so when class XXX changes in a way that is relevant to me,
I create class LP_XXX and give it appropriate behavior; its implementation is based
on the symbols NET11 and NET20, one of which is always defined in my Visual projects,
depending on which Visual Studio version I use.

And yes I would have liked such symbols to exist automatically.

Smile | :)

Luc Pattyn

[My Articles]

Re: Multi-version compilation

joputaidilico6-Mar-07 23:25

joputaidilico

6-Mar-07 23:25

Yes! thanks Luc!
That's the solution I've adopted here: manually!

In real world:
Microsoft releases different version of the FrameWork at will.
Customers has diferent versions of Framework installed.
Our enterprise has 2 compiling machines, one for each framework, each with his own VS IDE
We want to maintain just 1 source at a time

So...

what the F*)%!=) is missing an IDE constant telling us wich version of the framework is installed with the IDE, and thus making and automatic compilation.

How to convert DRM protected audio files to unprotected audio files

Balakrish4-Mar-07 22:12

Balakrish

4-Mar-07 22:12

Hi All,
How to convert DRM protected audio files (which are brought from iTunes) to unprotected audio files(i.e.,to MPEG or AVI or WMV format).

Bala

Re: How to convert DRM protected audio files to unprotected audio files

stancrm5-Mar-07 2:28

stancrm

5-Mar-07 2:28

Hmm... I think that is illegal.

Re: How to convert DRM protected audio files to unprotected audio files

m@u5-Mar-07 2:50

m@u

5-Mar-07 2:50

Hi
well you know removing drm protection really IS illegal. but i think if you google for "myFairTunes" or "qtFairUse" or something like that you might get some interesting results.

greets

m@u

Re: How to convert DRM protected audio files to unprotected audio files

Vega025-Mar-07 13:19

Vega02

5-Mar-07 13:19

Burn them to a CD within the iTunes software itself. They'll be unencrypted. You can then rip them using whichever program you prefer.

Writing a C# program to accomplish this task is an exercise left to the reader.

win ce project

gskumar1114-Mar-07 21:59

gskumar111

4-Mar-07 21:59

Hi all,

we are going develop a project for the hand held device in vs2005,c#.net and sqlserver ce basically i am application programmer that's what for my reference plz any body tell which books are the suitable for success fully complete this project it is very use full to me plz give books list with authors

THANKS IN ADVANCE

REGARDS,
GSKUMAR

Help, how to run C#

Member 38867704-Mar-07 21:47

Member 3886770

4-Mar-07 21:47

Help me, I cannot how to work/run any Solution Explorer from Microsoft Visual C# 2005 Express Edition, how to work and running Programmer.cs. Cannot how to know to write/run Recent Project!!! Help from hohsen@hotmail.com

How to get and run for new Progammer.cs from my C# Recent Projects???
hohsen88@yahoo.com

Re: Help, how to run C#

stancrm4-Mar-07 21:59

stancrm

4-Mar-07 21:59

You can run only Solution. You cannot run each file, for example Programmer.cs.
To build and run your solution, you can press F5 (with debugging) or Ctrl-F5 (without debugging).

WPF vs. WinForms: Menu merging.

__alex4-Mar-07 21:43

__alex

4-Mar-07 21:43

Howdy!

Migrating from WinForms to WPF:
Actually I use the ToolStripManger to merge WinForms menu items. (1) I wonder how this is to be done in WPF. (2) Am I able to merge menus from WPF into a WinForms app?

Cheers
-- Alex

Multi-treading

dotnethunk4-Mar-07 21:34

dotnethunk

4-Mar-07 21:34

Hello to all,
i m working on a project in which i have to fetch mobile number and call them and store the response.I m calling in loop ,and this is my problem.
Calling speed is much-much-much faster than the response. so i decided to use 2 nd thread to get response. but it still slow . Please tell me how to get rid of this problem.

sachin jangir

Re: Multi-treading

pbraun5-Mar-07 8:05

pbraun

5-Mar-07 8:05

You may need to look at the problem differently. Can you initiate only one call at a time or can you initiate multiple calls at relatively the same time?

If you can only initiate one call at a time, having a separate thread to wait for the response will not speed your program at all. I can only see your program having more speed if you can initiate multiple calls at the same time.

Phil

Drag And Drop

shamsteady4-Mar-07 21:30

shamsteady

4-Mar-07 21:30

Can we apply drag and drop when using Drawing properties in C#?

URGENT PLZ: how to print an invoice or receipt?

Jassim Rahma4-Mar-07 21:03

Jassim Rahma

4-Mar-07 21:03

I want to print an invoice and receipt using C#.

The invoice is pre-printed with the company logo and fields and I just need to print the figures on specefic point but I don't know how to it..

Plz Help..

Re: URGENT PLZ: how to print an invoice or receipt?

stancrm4-Mar-07 21:57

stancrm

4-Mar-07 21:57

Code sample :

private void button1_Click(object sender, EventArgs e)
{
  PrintDocument printDocument = new PrintDocument();
  printDocument.PrintPage += new PrintPageEventHandler(printDocument_PrintPage);

  PrintDialog printDialog = new PrintDialog();
  printDialog.Document = printDocument;
  DialogResult dialogResult = printDialog.ShowDialog();

  if (dialogResult == DialogResult.OK)
  {
    printDialog.Document.Print();
  }
}

private void printDocument_PrintPage(object sender, PrintPageEventArgs e)
{
  e.Graphics.DrawString("Hello World", new Font("Arial", 10), Brushes.Black, 10, 10);
}

Re: URGENT PLZ: how to print an invoice or receipt?

Jassim Rahma4-Mar-07 22:40

Jassim Rahma

4-Mar-07 22:40

thank you very much. Actually I have posted the same question in many forums but this the first and only reply.. I have more questions plz..

1. How can I force A4 paper size?
2. Is there anyway to prevenet the (Printing...) dialog? and display a Progressbar instead?

Re: URGENT PLZ: how to print an invoice or receipt?

Pete O'Hanlon5-Mar-07 2:10

Pete O'Hanlon

5-Mar-07 2:10