|
Thanks this looks great, should work perfectly!
Apparently it's not OK to start a bonfire of Microsoft products in the aisles of CompUSA even though the Linuxrulz web site says so
|
|
|
|
|
Sorry, I do have one question though, how will i know when the application is no longer idle?
Apparently it's not OK to start a bonfire of Microsoft products in the aisles of CompUSA even though the Linuxrulz web site says so
|
|
|
|
|
There's no event for that one.
What you want to do isn't normally done in applications. It's left up to the system to lock itself.
You might want to look into overriding the WndProc of your startup form to get this. You dont need to look for a specific window message, just that there is one comming down the pipe.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
So, something along these lines:
Private mLastEventTime As DateTime = Nothing
Protected Overrides Sub WndProc(ByRef msg As System.Windows.Forms.Message)
MyBase.WndProc(msg)
mLastEventTime = DateTime.Now
End Sub
except I wonder if WndProc would be called during an idle event if it was not being handled elsewhere...do you think i would need to add an empty handler to the Application.Idle and override WndProc at the same time?
Apparently it's not OK to start a bonfire of Microsoft products in the aisles of CompUSA even though the Linuxrulz web site says so
|
|
|
|
|
Do you think this would work if i used application.addfilter?
Public Class LoginTimer
Implements IMessageFilter
#Region " Delegates "
Public Delegate Sub IdleSub()
#End Region
#Region " Variables "
Private mCurrEmpTimeout As Integer
Private mLastMessage As DateTime = Nothing
Private WithEvents mBackgroundWorker As New BackgroundWorker
Private mSub As IdleSub = Nothing
#End Region
#Region " Constructor "
Public Sub New(ByVal theSub As IdleSub)
MyBase.New()
mBackgroundWorker = New BackgroundWorker
mSub = theSub
AddHandler mBackgroundWorker.DoWork, AddressOf mBackgroundWorker_DoWork
End Sub
#End Region
#Region " Event Handlers "
Private Sub mBackgroundWorker_DoWork(ByVal sender As Object, ByVal e As DoWorkEventArgs)
If Not mLastMessage = Nothing Then
If DateTime.Now.Subtract(mLastMessage).TotalSeconds >= mCurrEmpTimeout Then
mSub.Invoke()
mLastMessage = DateTime.Now
End If
End If
End Sub
#End Region
#Region " IMessageFilter "
Public Function PreFilterMessage(ByRef m As System.Windows.Forms.Message) As Boolean Implements System.Windows.Forms.IMessageFilter.PreFilterMessage
mLastMessage = DateTime.Now
End Function
#End Region
End Class
Apparently it's not OK to start a bonfire of Microsoft products in the aisles of CompUSA even though the Linuxrulz web site says so
|
|
|
|
|
Hi again!
My project is done and now I want to add icons to it.
I read that I can do this by selecting the *.ico file at the settings.
As I tried that, a error message poped up. The text was something like "32x32.ico is not a valid system file." I also tried a icon with 16x16 pixel with the same result.
I'm using Microsoft Visual Basic 2005 Express Edition if that has something to do with it.
I also added the file to the resources directory of the project.
Does anyone know how I can add Icons to the project?
|
|
|
|
|
I treid an other way to add the icon and a error warning popped up that said that this file cannot be used as an icon (but it is a *.ico file).
I use the freeware PixelToolbox 1.1 and create a 32x32 pixel windows icon with 4bit depth.
Do I use the wrong program, or wrong settings?
|
|
|
|
|
It could be that the app isn't outputing the correct file format. You might also want to try making 256 (8 bit depth) color icons, not 16.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
I "solved" the problem by using another icon creator.
Setting another colour depth had no effect.
Thx much
|
|
|
|
|
I know you already solved your problem, but I thought I would send you the link to an article I wrote on this subject. It is pretty basic using simple tools. It sounds like the icon create you have may be the better thing to use.
http://www.codeproject.com/useritems/HowToIcon.asp[^]
Ben
|
|
|
|
|
how can i sort array in vb
|
|
|
|
|
Easy way to answer Ur question:
For i=0 To N-1
For j=i+1 To N
if Array[i]< Array[j] , then Swap the elements Array[i] and Array[j]
Next j
Next i
N-> Index of Last element.
Regards,
Arun Kumar.A
|
|
|
|
|
Why rewrite what the framework already offers ?
This is a bubble sort, it's quite slow.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Christian Graus wrote: This is a bubble sort, it's quite slow.
I think this is selection sort.
Bubble sort would be: (in C Language)
for(i=1;i<n;i++)
{
for(j=0;j<n-i;j++)
{
if(a[j]<a[j+1])
{
swap a[j] and a[j+1];
}
}
}
Christian Graus wrote: it's quite slow.
Yes, it is the slowest sort.QUICK sort will be the most quickest.
Regards,
Arun Kumar.A
|
|
|
|
|
Arun.Immanuel wrote: QUICK sort will be the most quickest.
I'm not sure, I think it just has the best marketing team :P
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
You can also take advantage of the sort method found in the Array class. Just pass your array to Array.Sort. The method is overloaded and can take a number of different parameters.
|
|
|
|
|
I have a vb.net 2005 form that calls up another form to add or edit a record in an Access 2003 DB. All that is on this add/edit form is labels and text boxes. I have a primary key and when I add a record it works just fine, but when I try to edit a record I get the following error....
"Update requires a valid UpdateCommand when passed DataRow collection with modified rows."
Here is the code that I am using, I have stepped through the code and everything seems to be functioning just fine right up until I get to the Update line below, that is where I get the error.
Me.Validate()
Me.SurgeonsBindingSource.EndEdit()
Me.SurgeonsTableAdapter.Update(Me.AnesDataSet.Surgeons)
Can anyone help me track this down? I am really at a loss. I bet it is something easy but I just can't seem to figure it out. Thanks for any help that you can give!
|
|
|
|
|
Once you give the SELECT command to the DataAdapter, you can use an OleDbCommandBuilder[^] class to automatically generate the INSERT, DELETE, and UPDATE sql commands for the DataAdapter. These are all necessary if you want to do anyn updating of the database from the DataSet/DataTable you filled with the Adapter.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
|
If you're using a DataAdapter and doing updates back to the database through that Adapter, there is no choice. You MUST provide the other SQL commands, either by using the CommandBuilder, or by supplying them yourself.
If you're not calling update on the Adatper, then you don't need the other commands. There is simply no getting around this if you use an Adapter.
There are, of course, other ways to fill a dataset and writing data back to a database without using a DataSet.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
Hey Dave, thanks for you input on this. I am probably not explaining things correctly so I will try to do better. This function that I am using works on on less than 18 other tables in my project with no problems.
Here's an example of what I am doing in a working function...
If txtDrugUse.Text = "" Then<br />
EditRow.SurgDrugDesc = String.Empty<br />
Else : EditRow.SurgDrugDesc = Me.txtDrugUse.Text<br />
End If<br />
<br />
<br />
'Update the record<br />
Try<br />
Me.Validate()<br />
Me.Pat01SurgeryBindingSource.EndEdit()<br />
Me.Pat01SurgeryTableAdapter.Update(Me.AnesDataSet.Pat01Surgery)<br />
Catch ex As Exception<br />
MsgBox("Update of Surgury Table Failed")<br />
End Try
Now I that have this working just fine all over my project and that is why I don't understand why I suddenly need to use a CommandBuilder to do the same exact thing that works everywhere else. Any ideas?
One thing that I have noticed, and I don't know if it has anything to do with it or not. but when I type in Me.Validate it takes it but from the drop down list that comes up it isn't listed but ValidateChildren is listed. I don't understand why and it might not have anything to with it but I am completely at a loss here.
|
|
|
|
|
Did you use the Designer to add these tables to your code?? It sure looks like it. In that case, the CommandBuilders have been put into your code automatically by the designer.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
Yes I did. I created the Dataset and then I drug the needed tables to the designer.
|
|
|
|
|
Hi All,
I have the application developed in MS Dos Basic 3.0.
I want to convert or reverse engineering that application into .Net 2005 C#.
Kindly provide me suggestion or ways (any kind of parser is available).
thanks in advance.
Mack
|
|
|
|
|
The only choice you have is to analyze the source code of the app and completely rewrite it from scratch. There is NOTHING that will convert old DOS Basic code to anything in use today.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
