Re: how to execute another application thru C#? - C# Discussion Boards

god4k4-May-07 8:14

4-May-07 8:14

My Form have a button.
When I click the button, a Toolbox is shown.
This Toolbox is always on top of My Form.

Do you know how to create ToolboxM

Thank You.

network

Jeeva Jose4-May-07 7:15

Jeeva Jose

4-May-07 7:15

C# XP

1. A Connect internet

2. B router Connect internet and C is machine

B ip address is 58.6.3.6
C have a IP address is 192.168.1.3

A is machine direct connect internet
and B is router is connected a system.

I can send the file B to A
I could not nend the file A to B.
How can make lestion in B router.
Any body help me

Continue...

Re: network

Dave Kreskowiak4-May-07 7:58

Dave Kreskowiak

4-May-07 7:58

So what does this have to do with C#?

BTW, your explanation needs work. You might want to try using mmore than 58 words to describe the setup of your equipment and the problem you're having.

It took me quite a bit of reading to figure out "1. A Connect internet" meant. Is this a Windows PC? Which version? What's installed on it to do this internet sharing? What is "B"? How's it onfigured? You mentioned machine "C", but you didn't say anything about having any problems with this, so why even mention it?

Don't respond to this in the C# Forum. Use the Hardware Forum instead.

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007

Re: network

Ian Shlasko4-May-07 8:11

Ian Shlasko

4-May-07 8:11

I think he's having trouble traversing NAT (Network Address Translation).

Computer A is directly connected to the internet
Computer B is connected through an NAT router

He wants to send a file from A to B, but can't get through the router.

This is a pretty well-explored problem, but the quick solutions are:

1) Use a reverse-connect protocol. Instead of A connecting to B to send the file, have B connect to A and request the file. As long as B creates the connection, you're golden.

2) Specifically configure the router to forward the packets (This is only viable for an in-house solution, as you can't expect random users to do this), and figure out B's external IP by looking at the incoming connection on A, instead of having B tell A its IP.

I'm assuming you're trying to PROGRAM something like this... If you're having trouble doing this in an application, then this is the wrong forum.

Re: network

Paul Conrad4-May-07 16:20

Paul Conrad

4-May-07 16:20

Dave Kreskowiak wrote:
So what does this have to do with C#?

Got me on that. I don't see anything to do with C# in the post Confused | :confused:

how to execute another application thru C#?

Eddymvp4-May-07 5:54

Eddymvp

4-May-07 5:54

can someone give me a sample code on how I can execute a different application thru C#?

Re: how to execute another application thru C#?

Arun.Immanuel4-May-07 6:05

Arun.Immanuel

4-May-07 6:05

Try to explore Process.Start.

Plenty is available in Google.

Regards,
Arun Kumar.A

Re: how to execute another application thru C#?

Paul Conrad4-May-07 13:54

Paul Conrad

4-May-07 13:54

Look at Process.Start as mentioned by the other poster...

Re: how to execute another application thru C#?

AFSEKI7-May-07 3:20

AFSEKI

7-May-07 3:20

Have a look at MSDN Library for Process.Start(...)

Hope this helps...

Re: how to execute another application thru C#?

Eddymvp7-May-07 3:22

Eddymvp

7-May-07 3:22

Thanks guys, I was very busy this weekend and did not have a chance to look at it, I will look at it this afternoon.

Crystal Report Deploying problem

Nermeenez4-May-07 4:24

Nermeenez

4-May-07 4:24

Hello ,

I need your help on this, I have a C# 2005 application that includes Crystal reports, whenever I deploy this project I get an unhandle exception saying :"Could not load file or assembly Crystal decisions.Windows.Forms Version.... PublicKeyToken or one od dependencies, the system can't find the specific file" although I included the Crystal Reports on the prerequisites of the Setup file and I always included the assembly Crystal decisions.Windows.Forms to the application folder.

Thanks a lot

Nermeen

Re: Crystal Report Deploying problem

Tarakeshwar Reddy4-May-07 4:37

Tarakeshwar Reddy

4-May-07 4:37

Did you add the merge modules to the setup kit? If not have a look at this[^]

Secure Web Service with C# DataSource

Andre Vianna4-May-07 4:22

Andre Vianna

4-May-07 4:22

Hi,

I have a webservice serving a dataset with several tables. Every table has two main webmethods that allows then to interact with the databound controls in the client.
The general form of these methods are (please, its just a sample code to give the idea of the process):

<br />
[WebMethod]<br />
public MyDataSet.MyTableDataTable MyTableGetAll() {<br />
MyDataSetTableAdapters.MyTableTableAdapter vTa = new MyDataSetTableAdapters.MyTableTableAdapter();<br />
return vTa.GetAll();<br />
}<br />
<br />
[WebMethod]<br />
public int MyTableUpdate(MyDataSet.MyTableDataTable pDt) {<br />
MyDataSetTableAdapters.MyTableTableAdapter vTa = new MyDataSetTableAdapters.MyTableTableAdapter();<br />
return vTa.Update(pDt);<br />
}<br />

They work just perfect and I can use any databound control as if the dataset was local.
But how can I add encryptation to this solution without losing the bahavior of the conection.
I know how to send encrypt data via RSA keys thru a webservice but only with basic datatypes (as string or itegers) and even encrypt a content of a XML message. But how can I encrypt the data and the metadata structure (cause it would be terrible to encypt the data and give up the table structure in the resulting XML) and retrieve the DataTable object funcionality at the client side and vice-versa?

The following solution works?

<br />
// Server side<br />
[WebMethod]<br />
public {XML or String} MyTableGetAll() {<br />
MyDataSetTableAdapters.MyTableTableAdapter vTa = new MyDataSetTableAdapters.MyTableTableAdapter();<br />
return SomeEncryptFunction(vTa.GetAll());<br />
}<br />
<br />
// Client side<br />
public localhost.MyDataSet.MyTableDataTable GetMyTableData() {<br />
localhost.WebService vSvc = new localhost.WebService();<br />
return SomeDecryptFunction(vSvc.MyTableGetAll());<br />
}<br />
<br />
// Some Other place in the Client Side<br />
...<br />
oDataBoundObject.DataSource = GetMyTableData();<br />
...<br />

If It does what would be the code for SomeEncryptFunction and SomeDecryptFunction (the second one is the most important 'cause it has to retreive the DataTable object properly) ?

Thanks in advance for any help about this.

Sir Gallahad

P.S.

I've been reading about implementint security and cryptograpy to web services with WSE SOAP headers. But the articles I've read does not explain well how to code in the client and server side to make the handshake between them.

If that is the solution, can someone help me explaining how to do that.
Please any clue. Any code. Any link. Please. Confused | :confused:

Disapear sln

sujithkumarsl4-May-07 3:46

sujithkumarsl

4-May-07 3:46

hi,
the slution file of my project is not showing in the solution explorer. i can see the project and project file.
how can i see that?

My small attempt...

Re: Disapear sln

rujuc#4-May-07 4:18

rujuc#

4-May-07 4:18

hi
Compile your project once, you will see .sln file under your folder. It will not appear in solution explorer. And wht do you want to do with .sln file??? Confused | :confused:

Re: Disapear sln

marky7774-May-07 5:03

marky777

4-May-07 5:03

Try FILE->SAVE ALL.

Sometimes it brings up a dialogue asking where you want to save the solution file...
The save it in your project's folder.

Reading HashTable ?

Software_Specialist4-May-07 2:09

Software_Specialist

4-May-07 2:09

Hello
I am trying to read contents within HashTable but i am not getting it.
What exactly i am doing is

_mc = MarshallingContext.Unmarshall(s);
IDictionary map = (IDictionary)_mc.RootObject;

So whats going on here is MarshallingContext is the class i created to umarshall the data. So after 2nd step all the contents get stored under map.
Now if you place cursor over map it would show up 3 objects i.e state, owner, request. Well state is a simple string so i can access its data via
_state = (string)map["state"]
So till here there is no problem. Now owner object is a part of {system.Collections.Hashtable}. Under owner there are different keys and value like key = "user", value = "none://anonymous" and 5-6 more keys and value.
Now when i do
_owner = map["owner"];
and print _owner over console i get the system.Collections.Hashtable as a result. Where as i want it to output me all the values in below mentioned format

State : Owned
Owner : {
Machine : client1.company.com
Handle Name : MyHandle
Handle : 82
User : none://anonymous
Endpoint : local://local
Date-Time Requested: 20060302-15:32:34
Date-Time Acquired : 20060302-15:32:34
}
Pending Requests: []

So can any one help me out in this.
If you want me to clarify something particular that i couldnt explain in detail then pls let me knw.

Any or all help would be greatly appreciated.
Thanks
SS.

Re: Reading HashTable ?

rah_sin4-May-07 2:35

rah_sin

4-May-07 2:35

try to type cast the object to its original type i.e
Hashtable _owner =(Hashtable) map["owner"];

now from _owner object u can get the value based on the key specified.

rahul

Re: Reading HashTable ?

Software_Specialist4-May-07 4:15

Software_Specialist

4-May-07 4:15

Thanks its working Smile | :)

Exception Handling: Object creation within try block

Goebel4-May-07 2:03

Goebel

4-May-07 2:03

I'm currently getting into exception handling and have encountered the following problem. Let's say we have a class SampleClass. The SampleClass constructor takes various input parameters and is to check whether these are valid. If not exceptions might be thrown. Ideally I would like to have the code creating an object of type SampleClass to handle the potential exceptions. This does not quite work, as the compiler reports "Use of unassigned local variable..." outside the try block.

Here's the code:

<code>
public class SampleClass
{
public SampleClass(int param1, int param2)
{
int param1;
int param2;

if (param1 % param2 != 0)
{
throw new Exception();
}

this.param1 = param1;
this.param2 = param2;
}

public void Action()
{
// Some weird stuff in here.
}
}

public class Tester
{
class Program
{
static void Main(string[] args)
{
SampleClass s;

try
{
s = new SampleClass(20, 20);
}
catch (Exception e)
{
// Do processing here.
}

s.Action(); // Compiler says: Use of unassigned local variable 's'
}
}
}
</code>

I'd be quite pleased if someone could direct me into a promising direction. How to create object instances within try? You might say, just incorporate s.Action() within the try block. The problem is that in the real world example there is lots of code referencing 's'. So I'd end up with a massive try block and dozens of catch blocks afterwards. I reckon that's not what you would call best practices.

Thanks in advance.
All the best.
Goebel

Re: Exception Handling: Object creation within try block

Pete O'Hanlon4-May-07 2:09

Pete O'Hanlon

4-May-07 2:09

You can't use s to do something outside the try/catch if the constructor fails. This is because the compiler can't guarantee that it is uninitialised. If your code is so interdependent then this suggests that you probably need to refactor the code where possible.

Deja View - the feeling that you've seen this post before.

Re: Exception Handling: Object creation within try block

Goebel4-May-07 2:23

Goebel

4-May-07 2:23

<blockquote class="FQ"><div class="FQA">Pete O`Hanlon wrote:</div>If your code is so interdependent then this suggests that you probably need to refactor the code where possible</blockquote>

Thanks Pete, but I'm not sure how to apply the refactoring approach. The object instance of SampleClass will be passed to other objects yielding object composition. So quite a few lines of code depend on 's'.

public class Tester
{
class Program
{
static void Main(string[] args)
{
SampleClass s;

try
{
s = new SampleClass(20, 20);
}
catch (Exception e)
{
// Do processing here.
}

A1Class a1 = new A1Class(s);
A2Class a2 = new A2Class(s);
//...
AnClass an = new AnClass(s);
}
}
}

Re: Exception Handling: Object creation within try block

Pete O'Hanlon4-May-07 2:27

Pete O'Hanlon

4-May-07 2:27

Is there some reason that your classes A1Class, etc..., aren't inside the try/catch block. I can see no reason why you couldn't do that.

Deja View - the feeling that you've seen this post before.

Re: Exception Handling: Object creation within try block

Goebel4-May-07 2:47

Goebel

4-May-07 2:47

Good point, Pete! I haven't thought of that as there is lots of preprocessing to do in order to setup classes A1Class, A2Class,...

But I could easily do the preprocessing first and at a later stage initialise an object of SampleClass and create the various other objects within the try block.

Thanks for helping me out.
Goebel

Re: Exception Handling: Object creation within try block

Tim Paaschen4-May-07 2:13

Tim Paaschen

4-May-07 2:13

public class Tester
{
    class Program
    {
        static void Main(string[] args)
        {
            SampleClass s = null; 

            try
            {
                s = new SampleClass(20, 20);
            }
            catch (Exception e)
            {
                // Do processing here.
                s = null;
            }


            if( s != null )
            {
                s.Action();  // Compiler says: Use of unassigned local variable 's'
            }
        }
    }
}

This version should do the trick.

Regards,
Tim

Last Visit: 31-Dec-99 18:00 Last Update: 1-May-24 4:12

Refresh

ᐊ Prev 1...9401 9402 9403 940494059406 9407 9408 9409 9410 Next ᐅ

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.