|
Have you figured this out or still working on it?
"Any sort of work in VB6 is bound to provide several WTF moments." - Christian Graus
|
|
|
|
|
Hi All,
I have got a serious problem in my Pc. When ever i switch it on ,it make "signing up windows" as if it was restarting over and over again ,i am not at all able to go to the start bar at all.
Can anybody please help
Thanks,
Sahar
|
|
|
|
|
|
hi!
I want to design network for 25 pcs for students who worked on indivisual login(I mean different user)(client/server).Basically I am software related person.But now I have also worked on hardware and networking side.
Can any body help me or hint me how can I design?
if I use window server 2003 for server then which configuaration is required for clients????
or better to guide me some other network OS.
thanks in advance.
"Success lies not in the result , But in the efforts !!!!!"
Amit Mistry - petlad -Gujarat-India
|
|
|
|
|
First, you'd be better off using Linux. It's great for networking and is so much easier to control, unlike Windows. This should get you started:
Google: Networking With Linux
Hope this helps!
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
sir , I am working as faculty and programmer in the firm
so I have to designing the network as per the university rules. Linux is not in the syllabus so it is better provide me some idea on windows server 2003.
"Success lies not in the result , But in the efforts !!!!!"
Amit Mistry - petlad -Gujarat-India
|
|
|
|
|
|
Thanks !
Can you provide me ebook for window sever 2003???
or provide me a link ???
"Success lies not in the result , But in the efforts !!!!!"
Amit Mistry - petlad -Gujarat-India
|
|
|
|
|
EBooks are illegal, however Amazon.com has some good books: Windows Server 2003.
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
ACHTUNG! Gefährliches Halbwissen von rechts.
EBOOKS ARE NOT ILLEGAL! IT IS ILLEGAL TO COPY SOMEONE'S WORK WITHOUT HIS CONSENT. THAT IS WHY THIS RIGHT IS CALLED COPY-RIGHT.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
ok wasnt to sure if this was for mobile development or hardware, but anyway
im looking for a robot controller board that will store and run a program that is written in c++ or assembly code, but it must also have a capacity to store data and handle inputs and outputs
so has anyone seen or heard of anything that can do this, i have looked at various ones like lego mindstorms and serializer but these have proven to primative or require a constant connection
so if anyone knows of anything thats affordable <£400
Lloyd
|
|
|
|
|
|
hmmmm looks promising thanks
|
|
|
|
|
|
|
I'm trying to pick out a HDD to be used with Linux (Fedora Core 6). I've ruled out SATA because it doesn't reach the specs I need, and I'm trying to choose between SAS and SCSI. I'm leaning more towards SAS because SCSI is on its way out. However, SCSI is more reliable because it has been around much longer. My main question is if I go with SAS and decide to upgrade to a better SAS driver in the future, will I need to install a new driver? Otherwise, I might as well just go with SCSI for now because I'll have to install more stuff anyway.
If anyone has more information than what I've come up with or can answer my question, please help!
|
|
|
|
|
SAS is the current SCSI implementation. AFAIK the only differences between the old parallel and new serial interfaces are at the drive/controller chip level with identical interfaces looking towards the OS.
jswarts wrote: My main question is if I go with SAS and decide to upgrade to a better SAS driver in the future, will I need to install a new driver?
This doesn't make sense as written. Is one of the two "driver"'s here supposed to be a "drive"? The OS driver is from the controller company and completely independent of the diskdrive. You can upgrade the OS driver or add new drives without touching the other.
--
You have to explain to them [VB coders] what you mean by "typed". their first response is likely to be something like, "Of course my code is typed. Do you think i magically project it onto the screen with the power of my mind?" --- John Simmons / outlaw programmer
|
|
|
|
|
Oops. Yeah, I meant, "If I go with SAS and decide to upgrade to a better SAS drive in the future, will I need to install a new driver?"
I am going to be running Fedora Core 6 and wasn't sure how compatible/reliable/supported (I'm not sure which word makes the most sense) SAS would be. My department had issues with SAS on Linux in the past, which is why I am doing this research. I don’t have the details of their problems, but I wanted to find out if this was common for SAS and Linux, or if it used to be a common problem and is now fixed. Right now, the research I have done leads me to believe that as far as performance, SAS isn’t really all that much better than SCSI right now. Buying SAS over SCSI doesn’t seem like it would be a huge improvement. Am I being misled here?
|
|
|
|
|
for linux stability issues you'd need to post to a linux forum. This is justa WAG, but my suspicion is that just like with IDE drives you'd only see a performance gain for burst mode IO with sustained transfers being limited to the mechanical speed of the drive components, scsi drives have higher sustained rates but IIRC they've also had higher bandwidth levels to match. IF the SAS drives have sufficiently higher platter densities than the ultra320's at equal RPMs you'd see a gain there but it wouldn't be bus related.
--
You have to explain to them [VB coders] what you mean by "typed". their first response is likely to be something like, "Of course my code is typed. Do you think i magically project it onto the screen with the power of my mind?" --- John Simmons / outlaw programmer
|
|
|
|
|
Thanks for your help.
|
|
|
|
|
jswarts wrote: I'm trying to pick out a HDD to be used with Linux (Fedora Core 6).
The best place for this question would be either FedoraForum[^] or the Fedora mailing list[^].
Anyway SAS is SCSI (SCSI over Serial) and Linux doesn't really care which type of physical wire connects the host adapter to the drive. Just pick a host adapter that has driver support in the "vanilla" kernel and everything should be OK.
|
|
|
|
|
Hi All!
I get the following error message whenever I connected with the Internet and open browser Internet Explore 6.0.2800.
Should I have to change the secuirty level????
http://en.wikipedia.org/wiki/Image:Errrorpage.jpg[^]
How can I remove this error message ???
I have already format my pc 2 times......
"Success lies not in the result , But in the efforts !!!!!"
Amit Mistry - petlad -Gujarat-India
|
|
|
|
|
Some type of malware is causing that. it can be installed on the pc (installed upon first internet connection) to remove it use some spyware remover or antivirus (spyware remover: lavasoft ad-aware or spybot search and destory, for antivirus look at avast) then to make sure that it doesnt come back use a good firewall, i perfer kerio, but something more simple would be zone alarm.
(note that the message is the malware or network attack, whatever you do don't download their software, its bad software posing to be good security software..)
Google the programs i named and you will find them...
//Johannes
|
|
|
|
|
It's a harmless message being received using the Network Messenger protocol, from the Messenger service. Go to the Services console in Control Panel, Administrative Tools and stop this service, then go to Properties for the service and disable it. The fact that the message is getting through shows you have no firewall - very dangerous - and the fact that the service is enabled indicates you are not running XP SP2, which means that you are not getting Microsoft's latest security updates. If you do not keep up to date and use a firewall, you run serious risk of your computer being compromised by one of the many attacks targetting remote code execution vulnerabilities in Windows and other software on your computer.
I recommend that when you reinstall your PC, if your Windows disc is XP SP1 or RTM, UNPLUG FROM THE INTERNET FIRST - physically unplug your modem or router from the phone line or other outgoing connection (saves accidents). Then, after setting up your internet connection, turn ON the XP firewall under the network connection's Properties page, Advanced tab. Only then should you reconnect your internet connection.
If you're not sure what version the Windows disc is, it doesn't hurt to do this anyway. If the disk is SP2, it will ask whether you want to enable Automatic Updates during the setup phase.
Then go to Control Panel, Internet Options and click Use Blank under Home Page. This ensures that if your default page contains anything dodgy (generally unlikely, but if you have a customised version of IE on your install discs it could do something).
As the very next thing you do, before doing anything else, go to Windows Update and download all the updates. Reboot when it tells you, keep doing this until XP SP2 and all the newer updates are installed. I normally opt-in to Microsoft Update so that Office, Visual Studio, SQL Server, etc are all kept up-to-date too.
You should ensure you're running up-to-date anti-virus software. I use AVG - the free edition[^] is available for non-commercial use.
|
|
|
|
|
Dear anyone how read this,
Is there anyway to distinguish between inputs from different mouses in a C++ or C# application?
Thank you in advance!!!
Eloy
|
|
|
|