Re: C++ Exception - C / C++ / MFC Discussion Boards

T.RATHA KRISHNAN14-Jun-07 2:19

14-Jun-07 2:19

Hi ! I?'ve an application developed using MFC. When I run the project, a window will open. If I close the window manually (i.e by clicking the cross mark at the top left corner of the window), then an exception occurs.

It states:
Unhandled exception at 0x7c918fea in Perspective.exe: 0xC0000005: Access violation writing location 0x00000010.

If I break this exception,
Program control goes to a file called free.c

How do I resolve this Exception?

Re: C++ Exception

SandipG 14-Jun-07 2:25

SandipG

14-Jun-07 2:25

Check call stack you will be deleting some memory which is already freed or not allocated. May be Pointer will have some gabage value which you are trying to free.

Re: C++ Exception

prasad_som14-Jun-07 2:51

prasad_som

14-Jun-07 2:51

As sugeested earlier, it may be due to incorrect handling of memory, or writting out of bounds.
Run app in debug mode. See if call stack helps you.

Prasad
MS MVP - VC++

Re: C++ Exception

T.RATHA KRISHNAN14-Jun-07 2:54

T.RATHA KRISHNAN

14-Jun-07 2:54

How to view the call Stack? There is no tool bar icon for Call Stack in the VC++ Editor.

Re: C++ Exception

prasad_som14-Jun-07 3:02

prasad_som

14-Jun-07 3:02

Use Alt+7.

Prasad
MS MVP - VC++

Re: C++ Exception

T.RATHA KRISHNAN14-Jun-07 3:09

T.RATHA KRISHNAN

14-Jun-07 3:09

I used Alt+7 but it did not show the call stack. I tried Alt+F7 also. It also did not work.

This Project is developed using Visual Studio .Net 2003. The editor has a yellow arrow mark. If I click this, the Disassembly window opens. Is this the call stack U mean?

Re: C++ Exception

Russell^'14-Jun-07 4:12

Russell^'

14-Jun-07 4:12

In my VS version the shortcut is CTRL+ALT+C.
But firsly stop the program in DEBUG mode on a breakpoint.

Russell

Re: C++ Exception

T.RATHA KRISHNAN15-Jun-07 0:19

T.RATHA KRISHNAN

15-Jun-07 0:19

Thanks. It is working(Call Stack Opens). But How to find out at which statement the problem occurs?

There are two markers(One Yellow Arrow and One Green Triangle). What do these markers really mean? Will these markers be helpful in resolving the exception?

The Yellow Arrow stops at this line:
ntdll.dll!7c918fea()

More over, the above said line and following the three lines are gray in color.

The Green Triangle Stops at this line:

msvcr71d.dll!_free_base(void* pblock = 0x00600c08) Line 103 Language C

The above said line is in Normal Color(Black).

Re: C++ Exception

Russell^'15-Jun-07 0:52

Russell^'

15-Jun-07 0:52

the yellow arrow shows what file/function you are watching in VS, look at that!...and walk forward on the tree to find a function in your code (not in external dll) that do something wrong (than double cliche on that function on the call stack window).
Usually the error is in the first function that you will reach, and usually the real error could be in less than 10 lines before the line related to the crash...but it depends on your code.

Russell

Re: C++ Exception

T.RATHA KRISHNAN15-Jun-07 1:39

T.RATHA KRISHNAN

15-Jun-07 1:39

Thanks a lot.

I clicked all the lines from the beginning of Call Stack. When I Click a New
Line the Green Triangle goes either to a system file(like free.c) or to a inline file(.inl file like nicriticalsection.inl).

ni stands for Net Immerse Game Engine(previously called NetImmerse New Name is Gamebryo).

It did not go to any of the function defined by me. I should not change any ofthese system files or inline files. They are predefined. What to do?

Re: C++ Exception

Russell^'15-Jun-07 2:15

Russell^'

15-Jun-07 2:15

If ALL the lines (on the call stack window) are external to your project (very strange, becouse this means that your program it is not running Confused | :confused:

) then you can run the app 'step by step' (F10, or 'step in' F11, in debug mode) the program to find out what function cause the crash.
But I think you have to look better the call stack: 99.9% the error is in your code Frown | :(

Russell

Re: C++ Exception

T.RATHA KRISHNAN15-Jun-07 2:50

T.RATHA KRISHNAN

15-Jun-07 2:50

I tried step by step execution also(by pressing F10). Yellow Arrow moves to some of the system file like free.c,dbgheap.c,stdenv.c,crtlib.c,appui3.cpp and finally to disassembly.

If I continue this step by step execution(F10) from disassembly, once all the
lines are completed the Yellow marker moves to the file where it initially started(i.e this file is also not my file. It is system file only). If I execute step by step(like you said), the window did not open. But usually when run I run the program in debug or release mode, a window will open.

We can do all the operations defined(like loading an image file, moving or rotating an object, setting the visiblity of an object on or off). If I close the window using the cross mark on the top left corner, then only that exception occurs. If terminate the excecution using stop button in the tool bar no exception is thrown.

What to do?

Re: C++ Exception

Russell^'15-Jun-07 3:19

Russell^'

15-Jun-07 3:19

You need to pause the application one second before the crash...and then use debug tool like F10 or F11 to understand why it crashes. And do this, of course, before that the program exit from your code and goes to external dll(s).
You said that the exception comes when you close the application using the cross on the top right of the window....USE THIS INFO! Go to OnClose() (put there a brakpoint) and run the application step by step F10, F11.

Another thing: pressing the stop button in the VS toolbar will terminate the DEBUG mode, and it destroy the application, so no exception can occuors, beaouse NO CODE will run.

Russell

Fuction prototype in .C or .H

krishnakumar7514-Jun-07 2:06

krishnakumar75

14-Jun-07 2:06

Hi
The function prototype of fuctions used in a .c file has to be defined in .c file itself or in .h

Which is the best programming practice?

thanks

Krishnakumar

Re: Fuction prototype in .C or .H

James R. Twine14-Jun-07 2:18

James R. Twine

14-Jun-07 2:18

It can be defined where, even in a .myhdrfile if you really wanted to do so. The common practice is to put prototypes in .H files. The signature of the function usually has to be encountered, either as a prototype or as the actual implementation, before the function is actually used in code.

Peace!

-=- James
Please rate this message - let me know if I helped or not!<HR>If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
See DeleteFXPFiles

Re: Fuction prototype in .C or .H

Russell^'14-Jun-07 4:15

Russell^'

14-Jun-07 4:15

usually prototipe in .h files.
And the real code in .cpp files.

Russell

Drawing a text over a picture control

eli1502197914-Jun-07 1:31

eli15021979

14-Jun-07 1:31

Hi,

I added a picture control to my form and choose the BitMap type and loaded a bitmap into that control.
Now I need to draw text over that bitmap.
The problem is that the text is being drawn behind that bitmap and not above it(therefor - I can't see the text).
I use the following peace of code :

HBRUSH Frm_WkAtol::OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor)
{
	HBRUSH hbr = CDialog::OnCtlColor(pDC, pWnd, nCtlColor);

	// TODO:  Change any attributes of the DC here
	CRect rect;
	CRgn  rgn;
	switch(pWnd->GetDlgCtrlID())
	{
		case IDC_ATOL_CORRIDOR_BITMAP:
		{
			CRect TextRect;
			CDC *pLabelDC = m_AtolCorridorBitmap.GetDC();
			m_AtolCorridorBitmap.GetClientRect(&rect);
			TextRect = rect;
			TextRect.top = rect.top + 10;
			TextRect.bottom = TextRect.top + 25;
			TextRect.left = rect.left + 25;
			TextRect.right = rect.right - 25;
			pLabelDC->DrawText(_T("Test") , &TextRect , DT_CENTER);
			ReleaseDC(pLabelDC);
		}
		break;
	}

	return hbr;
}

Note - if I change the type of the picture control to
a Rectangle,I can see the text.
Doe's it mean that I need to draw the Bitmap by myself???

With best regards,
Eli

Re: Drawing a text over a picture control

shiraztk14-Jun-07 7:29

shiraztk

14-Jun-07 7:29

Hi
Just a guess

<br />
CCleintDC dc(this)<br />
CRect TextRect;			<br />
m_AtolCorridorBitmap.GetClientRect(&rect);<br />
TextRect = rect;<br />
TextRect.top = rect.top + 10;<br />
TextRect.bottom = TextRect.top + 25;<br />
TextRect.left = rect.left + 25;<br />
TextRect.right = rect.right - 25;<br />
dc.DrawText(_T("Test") , &TextRect , DT_CENTER);<br />

Regards

The Best Religion is Science.
Once you understand it, you will know God.

Re: Drawing a text over a picture control

Mark Salsbery14-Jun-07 7:40

Mark Salsbery

14-Jun-07 7:40

OnCtlColor() is called before the control draws itself so if you draw text there it will be
drawn "under" the control, as you are seeing.

You could derive your own picture box class from CStatic and make your m_AtolCorridorBitmap a
variable of that type.
add a WM_PAINT handler to the class. In the OnPaint() implementation, after calling the base
class' OnPaint(), draw your text in the client area of the picture box.

Mark

"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder

Re: Drawing a text over a picture control

eli1502197915-Jun-07 1:16

eli15021979

15-Jun-07 1:16

Hi Mark,

Thanks for your detailed explanation.

Mark Salsbery wrote:
OnCtlColor() is called before the control draws itself so if you draw text there it will be
drawn "under" the control, as you are seeing.

I didn't knew that.... D'Oh! | :doh:

(do you know where can I find a tutorial about the messages and
windows events sequence?)

Mark Salsbery wrote:
You could derive your own picture box class from CStatic and make your m_AtolCorridorBitmap a
variable of that type.
add a WM_PAINT handler to the class. In the OnPaint() implementation, after calling the base
class' OnPaint(), draw your text in the client area of the picture box.

This is just what I'm going to try....
Just one more question:
In design time I can attach a bitmap resource to the picture control.
How can I do it during run time(should I draw the bitmap by myself,or maybe attach
the bitmap in design time and only change the declaration of that control , i.e will it save
the properties I gave it in design time??)

Thanks again,
Eli

Re: Drawing a text over a picture control

Mark Salsbery15-Jun-07 6:05

Mark Salsbery

15-Jun-07 6:05

eli15021979 wrote:
How can I do it during run time(should I draw the bitmap by myself,or maybe attach
the bitmap in design time and only change the declaration of that control ,

You can use the CStatic::SetBitmap() method to set the control's bitmap.

You'll need the bitmap to set, and how you get that depends on where it is.

If it's a resource, the CBitmap class' CBitmap::LoadBitmap() method or the
Image::LoadFromResource() method will do it.

If it's a JPEG, GIF, BMP, or PNG file, you could use CImage::Load().

eli15021979 wrote:
do you know where can I find a tutorial about the messages and
windows events sequence?)

I wish I had specific links but I don't, sorry Smile | :)

The book "Programming Windows" by Charles
Petzold is a classic text for Windows fundamentals.
The Platform SDK has details on every Windows message. For example, the WM_CTLCOLORxxx messages
state "is sent to the parent window of a button before drawing the button".

Cheers! Smile | :)

Mark

"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder

Re: Drawing a text over a picture control

tyagineha14-Jun-07 18:05

tyagineha

14-Jun-07 18:05

hye eli,
can u tell me how to insert picture control..........

NT

Re: Drawing a text over a picture control

Hamid_RT14-Jun-07 19:57

Hamid_RT

14-Jun-07 19:57

You must insert a static control of Toolbox and set bitmap property on the property of control and use of SetBitmap() for insert image file to this control.

WhiteSky

Re: Drawing a text over a picture control

Hamid_RT14-Jun-07 19:56

Hamid_RT

14-Jun-07 19:56

Did you try on the WM_PAINT or WM_ERASEBKGND whats result?

WhiteSky

Property sheets

rajeevktripathi14-Jun-07 1:23

rajeevktripathi

14-Jun-07 1:23

Hi All

I have a property sheet, with 3-4 Poperty pages in it.
Used CTabCtrl Class to make property sheet...

Now I want to add feature that somone could be able to drag n drop a page from the sheet to the outside window.

Please tell me that how to solve this problem..

Thanks & Regards

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.