|
I recently downloaded (from CP) a .Net 1.1 project that uses the "System.Windows.Form.MainMenu" class, but there doesn't appear to be anything in the control Toolbox except the "MenuStrip". Same thing goes for the "StatusBar" control - the only thing available through the Toolbox panel is the StatusStrip.
I'm (almost) sure I can add the MainMenu and StatusBar to the form manually, but is there a way to get them into the toolbox?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Yes, there is.
A quick explanation of why they're not there: .NET 2 has new controls to supplant the MainMenu, Toolbar, and StatusBar controls: MenuStrip, ToolStrip, StatusStrip. The new controls are a bit more powerful than the .NET 1.1. stuff.
To answer your question, John, you should be able to right-click in the toolbox, select the 'choose item' option, and check off the ones you want in the toolbox. MainMenu is listed there as well as the other controls.
|
|
|
|
|
Many thanks. 
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Hello to everybody,
I've ben asked to create an aspx page that reads data from a Windows Service, not a Web Service, is it possible? any idea on how I can create such application?
Thanks
Bests,
Paolo
|
|
|
|
|
You can do this using remoting. It's not actually that hard to do, and you should be able to find any number of samples on google (search for remoting windows services).
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
I am using Visual Studio 2005 with C#. In my application, I have a TabControl. I want to dyncamically add TabPages at runtime. This would be just a matter or instantiating the additional TabPages and adding them to the TabPages collection of the TabControl.
However, I want to customize the functionality of the TabPages a bit by creating my own TabPage subclass. Also, I want to be able to add the very first of these custom tab pages with the Visual Designer.
Normally, I understand that to create a control that can be added using the Visual Designer, I must subclass something like UserControl. But I already need to subclass TabPage.
How do I solve that?
Thanks!
Mark
|
|
|
|
|
Does anyone know of a free one compatible with .net 2.0? (This is for a winforms app)
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
I know you asked specifically for free, but if you don't mind spending a little bit of money check out Navisight[^] from Divelements. I've used their controls in the past and they have a very straight-forward programming model and visually look really sharp. This one is $99 for a single developer license (without source code) and it goes down from there depending on how many licenses you buy.
|
|
|
|
|
Scott Dorman wrote: it goes down from there depending on how many licenses you buy
Or goes up?
But anyway it looks really cool. Thanks for sharing the URL.
|
|
|
|
|
Vasudevan Deepak Kumar wrote: Or goes up?
Depends on how you look at it. The more licenses you purchase, the cheaper each license becomes but the higher the overall price is.
|
|
|
|
|
Have you checked out the free and excellent Krypton Toolkit[^] for .NET 2? In my experience, these excellent controls have been of incalculable worth. You can do Outlook navbar with the toolkit and have everything themed as you see fit (classic, XP, Office 2003, Office 2007, and custom ones).
|
|
|
|
|
Is it var data type related about MS Aspect Oriented Programming or not? Do you have any idea about this?
Best Regards...
|
|
|
|
|
dataminers wrote: Do you have any idea about this?
Yes.
dataminers wrote: Is it var data type related about MS Aspect Oriented Programming or not?
No.
A simple search on google would reveal what the var type is used for, hint - take a look at LINQ.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Yes, I already check it. I know, var decleration and normal variable decleration is same for compiler. Compiler determine variable type at the same time which is var and normal variable decleration. But main question is var type is related about MS Aspect Oriented Programming. Why microsoft create var type? Okay, I know using in SQL Integration, and accually using for O/RM. Is it related about MS Aspect Oriented Programming or not?
|
|
|
|
|
dataminers wrote: Is it related about MS Aspect Oriented Programming or not?
I've already answered this. No it's not. They created the var type because they needed something to tell the compiler that this was an implicitly typed local variable. All it does is tell the compiler to infer the type of the variable from the declaration, which is why you can do this:
var i = 10;
Console.WriteLine("Type of i is {0)", i.GetType().Name); and not this:
var i = null;
i = 10; The second fails because the compiler can't determine the type from null.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Oh god... typeless variables... May as well code in freakin' basic.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
John Simmons / outlaw programmer wrote: typeless variables
They're not exactly typeless. They are still strongly typed at compile time and run time, it's just that you're letting the compiler infer the type based on the content. It's not the same thing as the VB Variant.
|
|
|
|
|
Yes, thank heavens! Shudder. 
It was entertaining to hear the shocked gasps ripple through all the old men that didn't understand 'var' when it was 'introduced' to them for the first time in June 2007. If you hadn't heard of 'var' by June, you aren't enough of a language expert to complain about it.
|
|
|
|
|
I am using NET1.1 for developing.
Generaly I install NET1.1 && NDP1.1sp1-KB867460-X86.exe SP1.
All was fine.
But today I found interesting thing
My old program is not working. 
It was very stange because I know that my program worked right two months ago.
(problem with standart picturebox control !!!)
I have deployed my program at new machine with WinXPSP2 installed without updates
and found that program works fine here.
So I think that problem in last updates.
What did happen with my machine?
Witch updated did influenced at picture box control?
I think that updates have been installed during last two-three months.
PS.
I use picture properties box from another thread via Invoke.
and modify only visible property. Picturebox contains gif - animated image.
|
|
|
|
|
You can always find out what updates affected a particular technology by searching at http://www.microsoft.com/technet/security/current.aspx[^]. From this you can see that there was an update in July (MS07-040[^]).
In addition to the security issues addressed, numerous outstanding issues in the CLR were addressed that had previously been released as private hotfixes. It's possible that you've encountered one of these.
I would confirm that it's definitely this update that's caused the problem, then if this is confirmed, post the code that seems to be having the problem, or contact Microsoft. They do say that security update support is free, but this may be a slightly grey area since it's developer support.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
Hi Mike!
Thanks for your reply.
I have solved my problem and have written own control instead of picturebox.
I have tested my program under NET2.0 (originaly writed under 1.1)
<startup>
<supportedruntime version="v2.0.50727">
<supportedruntime version="v1.1.4322">
Added to app.config
I think that reason of this problem not in NET Updates,
but Windows Updates affected at program.
|
|
|
|
|
Mike Dimmick wrote: (MS07-040[^]).
The list is scary with so much of patches to eat away the disk space. Considering all these, would MSDOS-based BATCH file based development be better or more RAD-friendly?
|
|
|
|
|
Using VS2005 SP1 on a WinXP Pro machine, using C++/CLI. The behavior described below does NOT happen when I replicate my steps using C#...
I'm trying to create a parent form class "FParent" so that I don't have to keep recreating controls common to each of the child forms. The child controls need to be contained in a Panel control, which I would also prefer to set in the parent form so that I don't have to keep re-creating the container panel.
When I create the child form "FChild", I go into the code view and change the class declaration from "public ref class FChild : public System::Windows::Forms::Form" to "public ref class FChild : public FParent".
At first, I could not drag a control into the parent panel area. However, if I go into the parent code and make "panel1" PROTECTED instead of PRIVATE, now it lets me drag a control.
So then I tried to drag a button onto the panel, and in FChild code I could see the line: "panel1->Controls->Add(button1)". This is exactly what I want. HOWEVER, when I close the designers, rebuild the project, and reopen the designers, the child button no longer renders properly. Instead of rendering as a child of the panel, the control is relative to the FChild client. In other words, if I had dropped a button at Point (3, 3) into the panel which was located at Point(20, 20), the button gets rendered at client point (3, 3) instead of the desired Point(23, 23). To make things worse, if the parent panel overlaps the child control, the parent panel is rendered over the top of the child control.
Does anyone know how to get around this and make the control render as a child of the parent panel, or do I need to compromise and make the container panel a member of FChild instead of FParent?
Thanks for your help.
|
|
|
|
|
If you have been looking forward to a way to combine WinForm controls within a Windows Presentation Foundation (WPF) client, Glen Block has announced the Windows Presentation Composite Client in his blog, My Technobabble. The WPF Composite Client is a project of the patterns & practices team. While the project is similar to Composite Application Block (CAB), the WPF Composite Client is a new set of libraries and guidance.
The team is incorporating lessons learned around patterns such as Modularity (composition), services, dependency injection, event brokering. and others.
The plan is to create a set of deliverables to be shipped piecemeal rather than just one giant “factory” release. Look for everything to ship before the end of 2008.
As for Acropolis, the team has announced the core Acropolis concepts will be rolled into future .NET Framework releases and into Silverlight. In her blog posting A new phase for the Acropolis project Kathy Kam advises:
If you have evaluated Acropolis and are unsure whether to adopt it for your project, or to use the existing CAB, or to wait for the new guidance, our guidance for this situation remains the same - if you are building a Windows Forms LOB (line of business) composite client (with maybe rich islands of WPF content) you should carefully evaluate the current CAB release. If you are specifically interesting in building composite applications on .NET 3.5, please get involved with the Patterns & Practices project and help us to deliver a guidance package that meets your requirements.
|
|
|
|
|
When you run a Console Application, in a console by pushing f5.
How do you get the console to pause, I would like to get to pause so I can look at my work.
You can cut this and play with it if you like. I just wont to pause it.
what should I Dim to pause or add to the end of the code?
This is a Application Domain.....Demo
Module Module1
Dim d As AppDomain = AppDomain.CreateDomain("NewDomain")
Sub Main()
Console.WriteLine("Host domain: " + AppDomain.CurrentDomain.FriendlyName)
Console.WriteLine("Child domain: " + d.FriendlyName)
End Sub
End Module
-- modified at 12:41 Tuesday 30th October, 2007
tim637
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
