|
Ok It works now, thank you again for your kindness. 
|
|
|
|
|
Blood_HaZaRd wrote: So how could i create a Golbale Variable under MFC?
In exactly the same way you would outside of MFC.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
This is a great example of what I struggle with in the forums. To some the purpose is to answer the question asked. I sometimes see a different problem. Like in this case I see a larger problem in that the OP "wants" to create some global variables. Since I mostly seem to be alone in this regard I guess that indicates that my perspective is wrong eh? 
|
|
|
|
|
led mike wrote: Like in this case I see a larger problem in that the OP "wants" to create some global variables.
That is an equally valid observation. I tend to error on the side of newbies wanting to port old C code to C++ whilst bringing along the baggage, too. To some, they simply do not know how to ask the right question.
I suppose you could also liken it to the old adage, "If the only tool you have is a hammer, everything resembles a nail."
led mike wrote: Since I mostly seem to be alone in this regard...
Which means you are simply looking at the request from a different vantage point. Nothing wrong with that.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
I'm mixing GDI and GDI+ together a bit and attempting to create a region in GDI+, then use the handle to that region to invert the colors using ::InvertRgn in GDI using the same HDC used to create the graphics object but someone helped me discover that the region is in device units when used in GDI and world coordinates in GDI+.
I'm struggling with the fact that I'm using the GDI mapping modes for my scaling so when I use the handle from the GDI+ region in a GDI function, the scaling gets mucked up without manually reproducing the scaling effect.
My question is "Does anyone know how the same effect (InvertRgn) can be achieved in GDI+ using the graphics object that is backed by a memory DC"?
|
|
|
|
|
Hi all
i have an Embedded Visual C++ aplication, in this aplication
exist a class where have declare the const CLSID_SQLSERVERCE_2_0
for create instance OLE DB for SQL CE 2.0
CLSID_SQLSERVERCE_2_0 = {0x76A85B2E,0x9DE0,0x4ded,{0x8E,0x69,0x4D,0xEF,0xDB,0x9C,0x09,0x17}};
i found CLSID for SQL CE 3.0
CLSID_SQLSERVERCE_3_0 = {0x32ce2952, 0x2585, 0x49a6, {0xae, 0xff, 0x17, 0x32, 0x7, 0x6c, 0x29, 0x45}};
But i need CLSID for SQL CE 3.5
CLSID_SQLSERVERCE_3_5 = ??????
sorry my bad english 
thanks
|
|
|
|
|
Hi,
When i include AfxMessageBox i get exit icon on the top right side of the
message box, Is there any way to remove that.
Thanks in advance
|
|
|
|
|
shir_k wrote: Is there any way to remove that.
My guess is, not without also removing the caption.
You could always roll your own message box.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
Thanks for the reply.
1)How to remove the caption?
2)Own message box means i have to create new dialog box in resource view and display the message or is there any other method.
|
|
|
|
|
Yes, there is probably a way to remove it (I think you have to look at how to remove the system menu or something like that).
But the question I'm asking is why do you want to remove it ? it's part of the normal Windows UI guidelines.
|
|
|
|
|
I just want to pop up a message to the user indicating "data is going to load please wait for sometime", It is just a information and data will be loaded even if user press "OK" or cancel button so i wanted to remove it.
|
|
|
|
|
It sounds like you want a modeless diaog instead so that the main thread is not blocked.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
So, there are no specific requirements to remove the "X" in the caption, so just leave it like that and concentrate on the the real features and/or other technical challenges that you might have.
|
|
|
|
|
Then why can't you use progress bar ??
Regards,
Paresh.
|
|
|
|
|
Click on the X button will give you back the IDCANCEL return value, as if you had pressed ESC or "Cancel" button.
Greetings.
--------
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
“The First Rule of Program Optimization: Don't do it. The Second Rule of Program Optimization (for experts only!): Don't do it yet.” - Michael A. Jackson
|
|
|
|
|
Any message box that can be dismissed with ESC will have a close button. That's just how it works.
|
|
|
|
|
Hello Everybody,
I have develop and installed as MFC application and every thing was working fine.But I get "Event ID 1073 Occurs When You Attempt to Move the Quorum Disk" error in system log when I installed IE7 on my system and tried to log off the computer.I have not installed any driver through my application.
Please Suggest something..
Thanks In Advance.
|
|
|
|
|
Here bmfh is an object of BITMAPFILEHEADER and I am not sure to achieve the core meaning of the statement below can U explain me ?
if(bmfh.bfType != 0x4d42)
{
throw CDibException(CDibException::enm_file_read_filed, "BMPƒtƒ@ƒCƒ‹‚Å‚Í‚ ‚è‚Ü‚¹‚ñ");
}
|
|
|
|
|
keyto wrote: can U explain me ?
can't you follow the posting guidelines ?[^] 
for your question, it just tests if the bfType member of your BITMAPFILEHEADER variable is different of the hexadecimal value 0x4d42.
if you can't understand this, maybe you should consider buy a book on C and lear about structs...
|
|
|
|
|
Hi,
MSDN[^] says that bfType must be BM.
0x4d - M
0x42 - B
Regards,
Paresh.
|
|
|
|
|
A consistence check for the bitmap file.
Every bitmap file must contain the characters 'B' (0x42) and 'M' (0x4d) at the very beginning.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
|
|
|
|
|
I have a sample project and I have to implement this code into my project. I could not understand the theme of the code can you make me understand the code? The code goes like this
void CDib::BmpLoad(CFile& rBmpFile)
{
int nCount, nSize;
BITMAPFILEHEADER bmfh;
nCount = rBmpFile.Read((LPVOID) &bmfh, sizeof(BITMAPFILEHEADER));
if(nCount != sizeof(BITMAPFILEHEADER))
{
throw CDibException(CDibException::enm_file_read_filed, "BMPƒtƒ@ƒCƒ‹ƒTƒCƒY‚ªˆÙí‚Å‚·");
}
// ƒtƒ@ƒCƒ‹ƒwƒbƒ_‚Ì'BM'‚ðŠm”F
if(bmfh.bfType != 0x4d42)
{
throw CDibException(CDibException::enm_file_read_filed, "BMPƒtƒ@ƒCƒ‹‚Å‚Í‚ ‚è‚Ü‚¹‚ñ");
}
nSize = bmfh.bfOffBits - sizeof(BITMAPFILEHEADER);
m_pBmpHead = (LPBITMAPINFOHEADER) new BYTE[nSize];
nCount = rBmpFile.Read(m_pBmpHead, nSize); // info hdr & color table
this->ComputeMetrics();
// BOOL ret;
// m_pImage = (LPBYTE)VirtualAlloc(NULL,m_dwSizeImage,MEM_RESERVE|MEM_COMMIT,PAGE_READWRITE);
// if(m_pImage == NULL)
// VirtualAlloc(&m_pImage,m_dwSizeImage,MEM_COMMIT,PAGE_READWRITE);
// MEMORY_BASIC_INFORMATION MemoryBasicInfo;
// VirtualQuery(m_pImage,&MemoryBasicInfo,sizeof(MemoryBasicInfo));
// if(MemoryBasicInfo.State != MEM_COMMIT)
// return;
// ret =VirtualLock((LPVOID)m_pImage,m_dwSizeImage);
m_pImage = (LPBYTE) new BYTE[m_dwSizeImage];
nCount = rBmpFile.Read(m_pImage, m_dwSizeImage); // image only
// ret =VirtualUnlock((LPVOID)m_pImage,m_dwSizeImage);
this->ComputePaletteSize(m_pBmpHead->biBitCount);
this->MakePalette();
this->MakeDDB();
}
|
|
|
|
|
Jeff Prosise's book [^] may help.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
|
|
|
|
|
keyto wrote: I could not understand the theme of the code can you make me understand the code?
Exactly which statement is troubling you?
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
What do you want to know?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
