|
Start at a eLancing website.
Vasudevan Deepak Kumar
Personal Homepage
Tech Gossips
A pessimist sees only the dark side of the clouds, and mopes; a philosopher sees both sides, and shrugs; an optimist doesn't see the clouds at all - he's walking on them. --Leonard Louis Levinson
|
|
|
|
|
This:
ayie wrote: just let me know where to find the source
is a direct contradiction to this:
ayie wrote: i want to know how to make fingerprint software using vb.net
Noone is just going to hand over that kind of project to you. Since that kind of technology is usually very proprietary and expensive. You're going to have to Google this one yourself. I'd searching for "fingerprint enhancement", or maybe "fingerprint ridge reconstruction algorithms".
I hope you're brushed up on your math skills.
|
|
|
|
|
How can I check whether a specific area (rectangle) on a panel
is blank or not?
I have a panel on which a graph is drawn.
I also want to print text on this graph.
However I do not want my text to interfere with my plot.
Therefore I need to check in advance if the area, where
I want to print my text, is blank or not. If not, I can
move my text so that there is no interference.
scubapro32
|
|
|
|
|
I do not know if there is any short cut but there is a long way but it works..
U will be knowing the back color of ur plot...
Traverse thought the plot and compare the color of all the point with ur plots back color
Plz do let me know if u find some thing which is a better method
Good luck...
|
|
|
|
|
Thanks for your reply...
The 'blank' backcolor of my panel is white.
The plot is black.
But how do I traverse through the plot?
Getpixel does not work with panels!
|
|
|
|
|
A faster method would be to do the math that calculates the largest area available, based on the line graph itself. Going pixel-by-pixel won't do you much good and is a very expensive operation.
Things to consider are what is the total available area in the graph? What is the biggest possible size you want the textarea to be?? Where does the graph intersect that area?
Once the graph passes to the right of the area you want the text in, you can stop looking at resizing the text area.
Basically, you'e calculating the intersection between two lines. Does the line you're drawing for a point on the graph intersect the line that is the bottom of the text area?? If so, then you either have to move the textarea or resize it to fit in the space between where your textarea starts and the intersection of those two lines.
Google for "calculate intersection of two lines" for the math to help you do this.
|
|
|
|
|
Thanks Dave,
but I think mathematics won't do the trick here.
First of all it's not a line graph, but more
a 'random' plot of peaks as seen in an 'chromatogram'.
Therefore a function of the line, and the chromatogram
(sums of near Gaussic functions) is not available.
|
|
|
|
|
Scubapro wrote: but I think mathematics won't do the trick here.
BS. Your drawing code still has to draw something from point A to point B. Whatever that something is, even if it's just a single point, you can still test for an intersection between either a line and a point (which side of the line the point is on), or if the point falls inside the area of the textarea.
|
|
|
|
|
The problem is I have over 6000 points and lines that are drawn first.
Then each textrectangle (100+) has to be printed at the right place.
|
|
|
|
|
I am already finish do my report, but I don't know how to connect my application VB.net to Crystal Report 10, may be anyone can help me please?
|
|
|
|
|
Hi,
You may try the below mentioned code snippet to connect your VB.Net application to Crystal Report using ADO.Net.
-------------------------------------------------------------------------
BEGIN CODE
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim rpt As New CrystalReport1() 'The report you created.
Dim myConnection As SqlConnection
Dim MyCommand As New SqlCommand()
Dim myDA As New SqlDataAdapter()
Dim myDS As New Dataset1() 'The DataSet you created.
Try
myConnection = New SqlConnection("Data Source=localhost;Integrated Security=SSPI;" & _
"Initial Catalog=northwind;")
MyCommand.Connection = myConnection
MyCommand.CommandText = "SELECT * FROM Customers"
MyCommand.CommandType = CommandType.Text
myDA.SelectCommand = MyCommand
myDA.Fill(myDS, "Customers")
rpt.SetDataSource(myDS)
CrystalReportViewer1.ReportSource = rpt
Catch Excep As Exception
MessageBox.Show(Excep.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
END CODE
-------------------------------------------------------------------------
I hope this helps  .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
I have a code to print text which prints perfectly when i print through regular printer but when i use the same code to print through a point of sale printer it doesnot print at all.It seems like it has been in the continuous loop.
I am using e.Graphics.DrawString(.......) to print.
Does anybody has some idea in this topic? Can we use e.graphics.drawstring method to print through the point of sale application by changing some settings or something...???
|
|
|
|
|
It has nothing to do with the application itself, rather it would depend entirely on the printer you're using, how it's connected to the machine, are there drivers installed for it, and how you want to print.
Somehow, of all the POS printers I've seen used, very seldom would you go through the Windows printing system to print a page on one of these things. Normally, I've just seen direct printing to either a COM port or LPT port the printer is connected to. You can even printer to a USB based printer if it's drivers expose it on a COM port to applications.
|
|
|
|
|
Hi,
I am stuck on VB.NET 2005, in VB6 i was able to load objects at run-time.
Problem is I am asking user how many textboxes they want and then system will create an array of those textboxes.
Here's the code I was using in VB6. I already had one textbox on form and the index was set to 0.(can't even do that vb.net)
For i = 1 to iSelectedNum
Load TextBox(i)
TextBox(i).Visible = True
TextBox(i).Top = TextBox(i - 1).Top + TextBox(i - 1).Height
TextBox(i).Left = TextBox(i - 1).Left
TextBox(i).Text = ""
Next i
I tried Code Upgrade function from VS 2005 but did not worK!!! Anyone please HELP!! 
|
|
|
|
|
Control arrays don't exist under VB.NET.
However, you can create your own quite easily.
Dim myTextBoxes As New List(Of TextBox)
For i = 1 to iSelectedNum
Dim newTextBox As New TextBox()
With newTextBox
.Top = calculated Top value
.Left = calculated Left value
.Text = "whatever text you want"
End With
myTextBoxes.Add(newTextBox)
Me.Controls.Add(newTextBox)
Next
|
|
|
|
|
Thanks a lot Dave. But there's one more question now!? How can i access them (textboxes)?
|
|
|
|
|
Private myTextBoxes As List(Of TextBox)
....
Private Sub CreateTextBoxes(ByVal count As Integer)
myTextBoxes = New Dictionary(Of String, TextBox)
For i As Integer = 1 To count
Dim newTextBox As New TextBox
With newTextBox
.Top = i * 20
.Left = 10
.Size = New Size(100, 18)
End With
myTextBoxes.Add(newTextBox)
Me.Controls.Add(newTextBox)
Next i
...
myTextBoxes(6).ForeColor = Color.Blue
|
|
|
|
|
Thanks for Reply. But there is still one problem in the example of code you wrote, and i cant figure it out why is it happening. It gives me following error
"Error1 -> Value of type 'System.Collections.Generic.Dictionary(Of String, System.Windows.Forms.TextBox)' cannot be converted to 'System.Collections.Generic.List(Of System.Windows.Forms.TextBox)'."
<code>myTextBoxes = New Dictionary(Of String, TextBox)</code>
|
|
|
|
|
Sorry, my mistake. That line should be:
myTextBoxes = New List(Of String)
|
|
|
|
|
In most, if not all, of the Multimedia examples that I'm studying that use MCI functions, alot of the variables are being declared as being of type Integer.
I was wondering why some of them aren't being declared as being variables of type Byte.
As an example: MIDI channels normally will only range from 1 up to 16 and cannot be a negative number.
Still these are being declared as being of type Integer, which takes 2 bytes of memory, if I'm right.
Does anyone know why these aren't being declared as type Byte (which takes only 1 Byte of memory)?
Thanks alot!
Jan
|
|
|
|
|
Jan34 wrote: I was wondering why some of them aren't being declared as being variables of type Byte.
That depends on the function being called and the limitations of VB6. If the function requires a 16-bit signed integer being passed in, a Byte just won't cover it. You MUST match the datatypes of the function being called as closely as possible, but in all cases, you have to pick a type that has a size matching the size of the type expected by the function call. If not, the stack corrupts and the cell will most likely fail, if not your entire application.
Why are you even starting with VB6?? It's a dead language with no further support from Microsoft. You can get VB.NET for free from MSDN.
|
|
|
|
|
I don't know for sure but 2 possible reasons are
1) They wanted to make sure they had a large enough datatype for different options.
2) Although this sounds counter intuitive smaller datatypes are sometimes slower than larger ones. CPUs are generally optimized for certain common datatypes and I think they are optimized for signed (positive or negative) datatypes and usually for datatypes of the processors word size. That would be 32 bits (4 bytes) for most processors out there altough I suppose the newer ones might be optimized for 64 bits.
Unless you have a really large array or something 1 byte of memmory really isn't going to matter much.
|
|
|
|
|
Hello everybody.
I hope this is the right place to post this .
Well, i need to read a stored procedure from vb.net, add some text and compile it.
In other words, i need to modify a stored procedure from vb.net and compile it.
I guess this is possible, but i am not sure how i could do this, maybe using SQLDMO
but i would like to know if someone around here has done this and could give me some advice.
Well i hope i was clear.
Thanks in advance for your time.
Henry de Sousa
|
|
|
|
|
HenrydeSousa wrote: i need to read a stored procedure from vb.net, add some text and compile it.
Are you asking how to read a stored procedure from an SQL Server database, modify that, then put it back in the database and compile it??
|
|
|
|
|
Yes.
For example:
i have this stored procedure:
Before:
CREATE PROCEDURE AddContacts
AS
INSERT INTO Contact
(ContactID, FirstName, LastName) SELECT EmployeeID, FirstName, LastName FROM Northwind.dbo.Employees
GO
i need to read that sp, modify it and put it back in the database and compile it from vb.net.
After:
CREATE PROCEDURE AddContacts
WITH ENCRYPTION
AS
INSERT INTO Contact
(ContactID, FirstName, LastName) SELECT EmployeeID, FirstName, LastName FROM Northwind.dbo.Employees
GO
As you may see i added the text WITH ENCRYPTION. This is what i need to do for every stored
procedure in the database.
modified on Wednesday, January 16, 2008 1:05:30 PM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
