|
Hi,
In regards to your query I would suggest you to visit the below mentioned link:
http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=2406&lngWId=10[^]
This small application backs up a selected Access database. The application helps in taking backup of copies from each day that didn't have to be restored from a backup tape. The application implements FileStreams, TextWriter (for logging), use of a Timer component, etc, and the System.IO namespace in general.
I hope this will give some ideas how you can achive the desired result in your application.
Have a nice day  .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
Hi,
i want to set the Form widht and height accordig to my UserControl width and height at runtime? how can i do this?
have some sort of usefull weblink or code snippet.
best regards
|
|
|
|
|
myform.height = myusercontrol.height
myform.width = myusercontrol.width
I must not know what you are asking for since I would guess you could figure that out for yourself.
led mike
|
|
|
|
|
or if you need room for a border:
myform.ClientSize = new Size(myusercontrol.width+some, myusercontrol.height+some);
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
|
|
Don't cross post, it's considered rude
|
|
|
|
|
Hi freinds i want to develop crystal report which used different data source to dispaly different record in one singal report
There i have some Question
1 : Can i used Subreport for differnt datasource in main Crystal report and can i send parameter to them
2: can i useHide subreport i.e if i there is Condition to show subreport(a)
then all remain subreport shoul be hide mean to say shoe singal subreport in each case Can i do this Can some body tell me
wasim khan
|
|
|
|
|
Hi freinds i want to develop crystal report which used different data source to dispaly different record in one singal report
There i have some Question
1 : Can i used Subreport for differnt datasource in main Crystal report and can i send parameter to them
2: can i useHide subreport i.e if i there is Condition to show subreport(a)
then all remain subreport shoul be hide mean to say shoe singal subreport in each case Can i do this Can some body tell me
|
|
|
|
|
HI,
i have a windows application in c#2.0.
i have three Usercontrols and one c#2.0 Winform.i dont know how to capture the event in winforms that is generated on UserControl.
How Can i Capture the Controls Events in Winfrom that i put on my UserControl? send me some Usefull web link or code snippets
BestRegards
|
|
|
|
|
Hi,
I am using dataset to bind to a datagridview. Data set have
Id,Name,Date,UserID ,UserName columns. The datagridview I have
column autogenerate property false and added ID,Name,UserName columns added
at design time.
Now question is, when I add a new row in datagridview, after entering value
for Name column, when i hit Enter Key, it shows me error that UserID can not
be null.
Could some one give me idea how to populate UserID value if its not
displayed on the datagridview.
Please guide me how to solve above problem.
Thanks in advance.
Obalesu
|
|
|
|
|
Hi i'm new to programming and I am coding in Visual C++ using windows forms but don't know how to call code in form1.h from another class.
I want the user to click on a button which will then will execute my code from the other class.
The form1.h does not like you to include any of the header file I have created and I don't know they are meant to be included somewhere else. I have included them in class where the main is created.
Not sure the other way as well, so if I created a new .cpp file and need to use say a textbox in the code. What needs to be done for this to happen?
Sorry for the stupid question
modified on Friday, January 18, 2008 11:33:45 AM
|
|
|
|
|
I see you post has been sitting unanswered for awhile. I would suggest you could get an answer if you asked it in the Managed C++ forum as most developers here are C# coders.
You also do not indicate if your other code is in another form or not. Typically you do not treat a form as a class. If you have code to be executed in two locations, then you create a class library and have both the form and your other code consume that class library with the shared code.
If your method needs to operate on a textbox, then just make it a parameter into the method call.
Hope this helps you some.
|
|
|
|
|
Hi I'm looking for a time line editor component, much like how Adobe Premier or those time line editing music tools. Is there such one around to recommend?
|
|
|
|
|
I have a dialog form which is currently showing. I would like to temporarily make it invisible. If I either call Hide(), or send a message to it to hide, then it returns a DialogResult. I'd like it to stay in the dialog loop - I'm going to make it visible again later.
Anybody have any advice?
Best wishes
James
|
|
|
|
|
Hi,
You may try using timer control and an integer/long type FLAG to achieve this instead of putting it in a loop. Below is the code snippet for the same. The below mentioned code consists of two forms Form1 (which is a main form) and a Dialog form (Dialog1)
-------------------------------------------------------------------------
BEGIN CODE
Public Class Form1
Dim FLAG As Integer = 0 ‘ Declaring a FLAG of integer Type
Dim frm As New Dialog1 ‘ Creatign an object of Dialog Form
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
‘ Setting the timer interval to 10 seconds.
Me.Timer1.Interval = 10000
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Timer1.Start()
frm.ShowDialog()
End Sub
Private Sub Timer1_Tick(ByVal sender As Object, ByVal e As System.EventArgs) Handles Timer1.Tick
If FLAG < 32500 Then
If FLAG Mod 2 = 0 Then
frm.Hide() '
FLAG += 1
Else
frm.Show()
FLAG += 1
End If
End If
End Sub
End Class
END CODE
-------------------------------------------------------------------------
I hope this helps.
Have a nice day  .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
Hi,
AFAIK you can't do that. Forms shown with ShowDialog() will be hidden, not closed,
when a button or the close box is hit, so they can be reused later on.
Conversely, hiding a dialog corresponds to hitting the close box, hence returns
a DialogResult.
Rationale: a dialog is top-most, what good would it be to show the underlying form
but have it disabled (as dialogs do). Or more general, what is the use of an
invisible top-most window?
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Hi Luc
I think you are right - that is the intention. Just for my application I'm trying to avoid this from happening.
You've asked why it would be of use - this, of course - stretches back to my application locking requirement which I am still working on.
With the windows forms source code released this morning I've been doing quite a bit of exploration. This is an excellent resource, and much better than reflector. I can't find exactly where the trigger that returns the DialogResult when the window when it is hidden (either with an external ShowWindow call, or with .net Hide/Show) - if I could I'd be able to see if there was any way to "work around" this behaviour.
Best wishes
James
|
|
|
|
|
hi all,
I have problem.in window application i am using datagrid veiw control.in this control cursor is moving to down cell when we press "enter key "(keyboard) .but i want to move to next cell(beside) of current cell when we press enter key buttone.how can we do this .
please help me
|
|
|
|
|
Hi,
The behavior you have noticed is the default behavior of the grid. In order to implement the desired behavior you need to sub class the
DataGridView controls and override/overload ProcessDialogKey and ProcessDataGridViewKey functions. Below is the code snippet for the same.
-------------------------------------------------------------------------
BEGIN CODE
Public Class dgv
Inherits DataGridView
Protected Overloads Overrides Function ProcessDialogKey(ByVal keyData As Keys) As Boolean
Dim key As Keys = (keyData And Keys.KeyCode)
If key = Keys.Enter Then
Return Me.ProcessRightKey(keyData)
End If
Return MyBase.ProcessDialogKey(keyData)
End Function
Protected Overloads Overrides Function ProcessDataGridViewKey(ByVal e As KeyEventArgs) As Boolean
If e.KeyCode = Keys.Enter Then
Return Me.ProcessRightKey(e.KeyData)
End If
Return MyBase.ProcessDataGridViewKey(e)
End Function
End Class
END CODE
-------------------------------------------------------------------------
For more details please visit the following link:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=157055&SiteID=1[^]
I hope this helps .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
Thank you sir for sending solution.but i am using c# in my windows application.in that i have taken datagridview control in form9 and where i can declare this class(your code) .how can we access that class please send clearly sir.i have been trying to solve this problem.
thank you sir.
Regards
Obalesu
|
|
|
|
|
thank you jhon for your code .it is working.but cursor does not gone to next row first cell when the cursor is in last cell of the currentrow when we press enter key.and i am facing another problem is i was trying to check the data entered by us in datagridview to database table.means datagridview first column name "x".i want check the x values to database table values if the data is already exist in database table at that time i want to show an error msg in message box.after that the cursor must be in the error cell.but the cursor moves to next cell.if error occurs the cursor must be in the error cell only.if u have any idea send me.
thank you sir.
regards
Obalesu.nagamalli
|
|
|
|
|
I'm trying to build a USB hub driver whose behavior is like windows' built in one.
My implementation is based on the ddk's example: toaster. Mass storage devices and scanners
works fine on my driver, however usb cameras can't be started.
I analysed the irps when the camera is plugined. After the start device irp, the driver received
a remove device irp. The ddk document says if anyone in the driver stack failed in start device irp,
pnp manager will send a remove device irp. I think there must be something wrong in the implementation before the remove device irp is sent.
There is a query interface irp which query TRANSLATOR_INTERFACE before the remove device irp is sent and I return STATUS_NO_SUPPORTED.
My response to start device irp is just like the toaster example does.
My question is:
1. Do I have to implement the TRANSLATOR_INTERFACE to fix the problem?
2. Or is there something else I have to do in my start device response?
|
|
|
|
|
CodeGuru has a hardware driver forum. You would probably get an answer over there.
Hardware-level development if a much different animal from standard application development.
Hope this helps you get an answer.
Michael
|
|
|
|
|
Hi,
This is from chandrakanth.
I have created SSIS package. And I want to Call from Asp.net 2.0
Can any one tell me how to call that.
Thanks In Advance
chandrakanth
Chandrakanth
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
