|
I see where you are coming from - but model database files location are both correct (i.e. both \DATA)
Thanks for your attention. 
|
|
|
|
|
In Management Studio, right-click the server in the Object Explorer tree, select Properties, go to Database Settings, and change the paths under Database Default Locations.
IIRC, you need to restart the SQL Server service before the change takes effect.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
Woohoo! Yup - the default locations were blank (dunno where it was getting them from before  )
Changed and successful - did not even have to restart SQL server agent or anything.
Cheers Mike! ![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
|
|
|
|
|
Hello!
My hosting company gave me a backup of my online DB (a BAK file), which I've attached to my local SQL Server, in order to perform the tuning locally at first, and then on the online DB.
I use a trace file, which was created by the Profiler, that ran on the online DB.
I get no suggestions at all, but errors. The most frequent errors are:
1. Event does not reference any tables
2. [Microsoft][SQL Native Client][SQL Server]Could not find stored procedure '(some stored procedure name)'.
Thanks in advance!
|
|
|
|
|
Hello everyone ,
I am trying to back up a database using VB.net . Is there any coding for that ? I need to backup a database connected to !!! Not a database that is not connected to !! Because when I open my program it will automatically connect to the database .
J ,
|
|
|
|
|
An Access Database is just a file... you could do a file copy to a backup location. I'm not sure that the mdb file being opened will affect this process. If it does, you could always temporarily close the connection and restore?
|
|
|
|
|
Hy ,
Thx for ur answer . But whats the code like ? Check if the file exist and the copy it to another directory on a button click ? How the code look like ?!
Thx again.
J ,
|
|
|
|
|
John Kh wrote: Check if the file exist and the copy it to another directory on a button click
You could do something like that... that would be the easiest. Only thing is, you will need to make sure that the backup copy works. So restore the database back to original location and check that it actually has been copied over correctly.
|
|
|
|
|
Can any one tell me if it is possible to get the page total in the body section of a report....not the footer...thanks in advance
|
|
|
|
|
I think you'll find that the page total is only produced AFTER the page is rendered therefore it is not available inside the actual page. Having said that I beleive you can assign it a variable and access the var from withing the page, this will reflect the current page - 1. Kludge but we have used it.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
The problem for me is not calculating the pg total. The main problem is that if the table is spanning multiple pages then how do i get a report item to appear on each page below the table so that i can display the total without using the page footer. i cant use the table footer and cause it to repeat on every page because the table footer is processed only once at the end of the table
|
|
|
|
|
Hi, I have develop database application in vb 2005 and using sql express as database back end. I have declare a connection as below
Dim cnnDICAdmin As New SqlConnection("Data Source=.\ SQLEXPRESS;Database=DICDbase;Integrated Security=True;User=Admin;Pwd=") but when my application but when i run amy application its display an error as below:
System.Data.SqlClient.SqlException was unhandled
Class=11
ErrorCode=-2146232060
LineNumber=65536
Message="Cannot open database "DICDbase" requested by the login. The login failed.
Login failed for user 'CAMBODIAGFATM\roathkanel'."
Number=4060
Procedure=""
Server=".\ SQLEXPRESS"
Source=".Net SqlClient Data Provider"
State=1
StackTrace:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at DIC_Administration.frmProvince.btnAdd_Click(Object sender, EventArgs e) in C:\Documents and Settings\roathkanel\My Documents\Database\DIC Administration\DIC Administration\Province\frmProvince.vb:line 38
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(ApplicationContext context)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at DIC_Administration.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Please let me know how to solve this problem. Thank in advance.
|
|
|
|
|
Check out this:
^
It shows conenction strings for most databases.
Bob
Ashfield Consultants Ltd
|
|
|
|
|
This is the common problem when you have installed the sql server express edition.
First you have to make sure that your Connection String is Correct.
most likely this problem is caused because in default condition sql server express edition cannot allow remote connection.
so please do following
Open "SQL Server Management Studio Express"
Connect to your Database
Right Click on the Database in Object Explorer
go to Properties
select "Security"
Now in Server Authentication Mode
select "SQL Server And Windows Authentication Mode"
Restart the SQL Server Service (if you dont know how then restart the computer )
if still have the problem then
go to
Start ->
SQL Server 2005 ->
Configuration Tools ->
SQL Server Surface Area Configuration
Then select "SQL Server Surface Area Configuration for Service & Connection"
now select "Remote Connection" ->
tick on "Remote and Local Connection" ->
again tick on "Use Both TCP/IP and Named Pipe"
Now go to Service "Stop" it and then "Start" it.
if you still have the problem then double check your connection string 
|
|
|
|
|
Hey guys, I have got two tables, in PurchaseT I store the data for a purchase (Amount and PurchaseCode), in PurchaseCodeT I store the names for each code, (1 = Grocery, 2 = restaurant and ...) now I have a select command which get some records from PurchaseT, but instead of the codes I want to have the name for each code ... how can I pull that off !!
Thanx heaps !
Mr.K
|
|
|
|
|
SELECT P.Amount, P.PurchaseCode, C.Name AS PurchaseCodeName
FROM Purchase P
INNER JOIN PurchaseCode C ON C.PurchaseCode = P.PurchaseCode
|
|
|
|
|
For MS SQL Server 2000...
Sometimes I want to define and use variables within a View, but it appears that is not possible.
That includes using table variables in Views. I'm new to SQL. Is there a way to do this? If not can someone explain the reason for it being not allowed? Google hasn't been much help on this one. Thanks
|
|
|
|
|
Variables are procedureal constructs. A view is for creating alternative views of your data only. Not sure what it is you want to do, but once your view is defined to you can "pass a variable" to it from your stored procedure or batch statement like this:
SELECT col1 + @myVariable AS Col1Alias
FROM myView
WHERE col2 = @myVariable2
Just think of a view as a derived table instead of a script or code file and that should help. The kind of stuff you're describing can be done w/in a stored procedure, that's what you want to use in most cases.
|
|
|
|
|
Views just execute select statements, and act very similarly to tables, you can do formatting and things in a view, and limit the columsn in one or more tables that someone has access to. that and formatting and long complicated joins are their main purpose i believe, its a lot better to put a long complex query in a view and have a simple select in your code, if you're using it in an application, makes it easier to change if something is wrong or table layouts change. If you want to declare varibles or run other queries, you can use a stored procedure. you can run cursors, use varibles, even run other stored procedures in them, pretty much anything youcan do in query analyzer. in sql 2000 if you need a result set back just select it back..select <whateveryouwant> in teh sp...be careful tho because you can do multiple selects like that in one stored procedure, and when it executes it will return multiple result sets, which can cause problems if you're using an app (win forms or web) to read the data.
|
|
|
|
|
As someguy said a view is basically a select. However you can do some real cutes with a view as long as you are not passing IN information.
IE you can get a view to select from a UDF where data is filtered and formatted in the udf using functionality that is not available to the view. We have one that checks the top 1 date from various tables - used to verify that all the data has been loaded correctly.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
I have filled a table variable with some invoice data and it looks like this:
Invoice# Batch#
733F7F75 946
733F7F75 924
733F7F75 929
733F7F75 940
733F7F75 948
733F7F75 939
733F7F75 947
733F7F75 923
733F7F75 938
733F7F75 922
733F7F75 927
733F7F75 944
733F7F75 945
I have a basic select query on that temp table, something like this:
select InvoiceNumber, BatchNumber from @t order by InvoiceNumber
what can I do to get the highest batchNumber (Underlined result up there ^) from my table variable?
|
|
|
|
|
How about using max function?
|
|
|
|
|
Hi,
Use Max function to get the largest number from the table. The syntax is:
SELECT MAX(net_amount) FROM Sales;
SELECT MAX(company) FROM Sales WHERE net_amount > 100;
I hope this would be helpful.
Vinay
ComponentOne LLC.
www.componentone.com
|
|
|
|
|
i have insert trigger its function is insert one column in a table
and stored procedure its function to insert data to remained columns in the same table .
can i call the procedure within the trigger to perform row task completely
or change my scenario
regards
|
|
|
|
|
Why not try it and see? Its quicker than posting a message and waiting for a reply 
Bob
Ashfield Consultants Ltd
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
