|
We've found that it can take a system reboot before the interactivity of a newly-installed service starts working.
In addition, this only works if you're logged in on the console session (session 0). For Remote Desktop/Terminal Services, run mstsc /console.
You should move away from this approach ASAP as Windows Vista and Windows Server 2008 have locked down session 0: you can no longer spawn processes that will appear on the user's desktop.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
Thanks.
One clarification - what is the option to do a similar operation on widows vista/2008 server?
If we impersonate a logged-on user,though we do not see the browser,it serves the purpose for us.
Will impersonating a interactvie user for a process launched from a windows service continue to work in vista/2008?
Or will that be clamped on too?
|
|
|
|
|
Hello,
I posted a question into the Lounge regarding how to read the registry of one Win95 that doesn't boot.
The answers I've got are great, and refer me to use the regedit in real mode.
I can get access to it by using a floppy drive with a boot disk (it seems that it is not the same OS version so I cannot make a "sys c:" to make it bootable again).
What I've tried till now is to use regedit in real mode as it is explained in several pages in the Internet:
regedit /l:c:\windows\system.dat /r:c:\windows\user.dat /e c:\file.txt
That instruction should read the DAT files contents and write them into the c:\file.txt.
The problem is that if I open the USER.DAT file using an editor I can read some strings that make me think that the information that I need is inside that file (some paths to the program which configuration I need to recover) but when I execute that instruction a complete registry dump is made, but those strings disappear completely.
I must be doing something wrong, but I have no clue on what can be.
Do you have any idea that could help?
As always thank you in advance.
|
|
|
|
|
It seems that there is a little application that can show the contents of a .DAT file the refers to the registry:
SYSTEM.DAT and USER.DAT in win95 & 98.
It is called RegDat and it is shareware.
I can promise you I've almost become mad trying to find it out.
Moreover, at the end it has not been useful... 
Time to go home...
|
|
|
|
|
hey all,
I am a system admin and facing a lot of troubles in the operetors computers. they are bringing with them flash memories ( memory stick) which is not allowed.
is there any way to stop it? without disabling the usb port?
10x
|
|
|
|
|
OK,
Tell me is there any other utilities of using the USB port on ur clients?
You can deny access to USB port. But it depends on OS, how u will do it?
Which OS u r using?
|
|
|
|
|
if the users bring flashdrives and introduce viruses to your network, try panda antivirus. the only other way is to disable USB port.
---------------------------
Both optimists and pessimists are important in technology. The optimist invented the aeroplane; the pessimist invented the parachute.
Regards,
Hesbon Ongira
Nairobi, Kenya.
|
|
|
|
|
If you just want to block user from downloading information from pc,you may just disable write access properties for USB port by using system Registry.Or if you want block user from accessing USB for any purpose, you may also using registry or policy setting.
I am just using registry for block user from access usb port
Hope this help
|
|
|
|
|
i need to develop a application for taskmonitoring(operating system).will there be any pluggin applications to monitor the tasks in a system(free downloads) in the net,or get details about that
|
|
|
|
|
What's wrong with Task Manager or using the Performance Monitor?
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Dear All,
I have removed system user rights in windows xp and now i am unable to log in and even i can't go into windows xp. please help me out . how to add rights to this.
waseem
|
|
|
|
|
waseem khan wrote: emoved system user rights in windows xp and now i am unable to log in
Are you surprised?
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Not sure if this is the best forum, but it is relating to an operating system not booting.
I've now seen for the second time a computer where the partition table on the boot disk has been lost, meaning that no partitions exist on the disk.
In both instances, I've managed to recreate the partition with a Linux based CD, which recovered all the data, and then fixed the master boot record of the boot device and all was fine.
But in both instances, I haven't been able to find the root cause of the problem. I'm not aware of any programs that can do this, or anything a user can do to cause this, and I think it's happening at too low a level and too specific to be a virus.
Any thoughts, ideas, suggestions or possible answers would great!!
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
If you are running windows xp, you could boot with the installation disk, go to the repair console, and use chkdsk to see see if your hard drive has any errors. If you're not running windows xp, then maybe your hard drive is close to burning out?
Code pre-built is code that you don't have to build later.
|
|
|
|
|
In this case it was a Small Business Server 2003, and the OEM disk didn't include the recovery console, which is something I'll be taking back to the OEM vendor. I did get my hands on a retail edition though, which does include the recovery console which fixed the master boot record.
It actually happened to my own system quite some time ago as well, and the hard drives in that system are still running without issue, so I'm not sure it is the hard drive burning out either.
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
Not sure what it could be then. I've never had that problem with any of my hard drives before, and I've had them for about 5 to 6 years so far. Glad to try to help you, though.
Code pre-built is code that you don't have to build later.
|
|
|
|
|
Could you post more detailed information about that? How many users are using the OS? How the issue manifested (blue-screen, reboot or something). What kind of applications have you installed?
|
|
|
|
|
The first one a while ago was simply a single system, that had a heap of programs installed under Win XP. It was fine the night before, and when it went to startup the following day, the operating system not found message appeared.
The second time around, and the most recent, was an SBS 2003 R2 box, which was only less than a month old, and was shut down in order to install a UPS. Once connected to the UPS, the machine was restarted, and the operating system not found message appeared. In this instance, it only acts as a server, no user at the console, has the standard SBS stuff installed - SQL, Exchange etc., and not much, if anything else is installed, but has not more than 15 or 20 users accessing it.
Therefore, about the only commonality I've been able to see is that both have occurred on a shutdown, but I don't know if the partition table was cleared before shutdown, during shutdown or on the restart.
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
I guess you're using NTFS. In your case I would try to isolate the issue somehow. For example try to disable the swap file, disk caching, etc. It's nasty if you don't know how to reproduce the issue. Maybe you could experiment with a cloned partition on another machine. Or the disk in another machine. I would like to know the causes of this, so if you find out anything please post it.
|
|
|
|
|
can any one please tell how many languages are supported by visual studio 2008  and what are they and how many classes it supports. thanks in well advance
|
|
|
|
|
Google broken where you live ?
.NET supports an infinite number of classes, they are being written all the time.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
42 and counting.
|
|
|
|
|
Hi, My computer is running windows server 2003. After I log on to windows, its display the message box Missing Hardware ID. Then the system is shut down immediately like no electricity. I don't know what is the cause of the problem. Can anyone give me any suggestion to solve this problem? Thank in advance
|
|
|
|
|
How to install the microsoft's Visual C++ Runtime 8.0 in XPE? Microsoft has been published vcredist_x86.exe for installing the runtime, but in my XPE image there is no support for the Windows installer, and i have some difficulties to adding one.
so i am looking for an alternative way to install the VC8 runtime in XPE. like copying the files and manifests and making the registry entries, anybody here faced the same issue???
Any help will be appreciated.
Never Work Hard! - Work Smart!!!
www.indianITforum.com
|
|
|
|
|
I tried installing Fedora 8 on a pentium III machine but was never successful. Can somebody tell me what might have cause this problem. Thanks in advance.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
