|
I just tried to install one this morning, and tried to set it up just for wireless, i.e. no ADSL routing etc. The setup wizard seems to insist on going through all that first.
While I can see the 'control panel' using the 168.162.0.1192.168.0.1 address, I can't see the "Wireless Settings" button I'm supposed to click, and a nearby Vista laptop I can't see any wireless networks.
Am I doing something wrong?
Last modified: 4hrs 39mins after originally posted --
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
I've seen that happen with some routers' wizards when you try to skip the dsl-settings: They ignore settings if they deem the wizard "incomplete" - and don't necessarily give you notice. The NetGear support might be able to help you out (IIRC, you're in sort of a hurry).
However stupid that sounds, does the box have one or more antennae? The models all look the same (except for the antennae), so a non-wireless model might have slipped through. Also, the box might have the wrong firmware. Try to upgrade the firmware to the most recent revision.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Sebastian Schneider wrote: However stupid that sounds, does the box have one or more antennae? The models all look the same (except for the antennae), so a non-wireless model might have slipped through. Also, the box might have the wrong firmware. Try to upgrade the firmware to the most recent revision.
Doesn't sound stupid at all - it would have crossed my mind if it didn't have an antenna, and a wireless LED flashing on the front panel, that I had got just a DSL router in a wireless box.
Maybe I've got a plain ADSL router firmware in a wireless device? 
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
Sebastian Schneider wrote: However stupid that sounds, does the box have one or more antennae? The models all look the same (except for the antennae), so a non-wireless model might have slipped through. Also, the box might have the wrong firmware. Try to upgrade the firmware to the most recent revision.
Haha, this is closer to correct than we would have suspected. Since I was last there, he has changed his ADSL modem/router to an ethernet only NetGear, with the same IP! I was connecting to his existing one, and not the new one!
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
Earlier this month I was considering buying a NetGear router, not necessarily the WGR614, and am interested in your experiences. However, occasionally, my existing router sometimes allocates a 169... address to a particular PC on my network (doesn't happen nearly as often since replacing ZoneAlarm firewall with Comodo) - the other PC's are correctly allocated a 192.168.1.x address - usually a PC reboot resolves that problem. I have never experienced a 168.162.x.x address and the on-line NetGear manual doesn't appear to cover that specific IP address problem but does suggest you reset the router to factory default. Keep us posted on your resolution of the problem, and, if you so feel, keep us posted on your continuing experiences.
modified 1-Aug-19 21:02pm.
|
|
|
|
|
See my second reply to Sebastian. I had the addresses in my post wrong, and have now edited them.
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
I just realized something weird
Both IP addresses are assigned to Sunguard availability services in the USA.
They are not in any private IP range that I have ever heard of.
Maybe, just maybe, did you mean to connect to 192.168.1.1 or 192.168.0.1 ?
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Yes, fixed. 
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
Hi, I just install the driver for my new printer HP 2015d and HP PhotoSmart C5280. Everything is working fine but every time that I start up my computer, I found the message indicate that: hppusg.exe Application has generated an exception that could not handled. Process id=0x1270 (4720), Thread id=0x141c (5148). Does any one know what is the cause of the problem? And what is the solution disable this message box?
Thank in advance!
|
|
|
|
|
The problem is that HP can't code its way out of a wet paperbag.
Fixes:
1) if you haven't done so visit HPs website and make sure you have the latest version of their suckware.
2) If that doesn't work (or if you just want to be rid of the suckware in general) start-run-msconfig, startup tab, find the row for hppusg.exe and disable it from starting at boot time. Click apply. It shouldn't try and start the next time you reboot.
Today's lesson is brought to you by the word "niggardly". Remember kids, don't attribute to racism what can be explained by Scandinavian language roots.
-- Robert Royall
|
|
|
|
|
dan neely wrote: 2) If that doesn't work (or if you just want to be rid of the suckware in general) start-run-msconfig, startup tab, find the row for hppusg.exe and disable it from starting at boot time. Click apply. It shouldn't try and start the next time you reboot.
Thank you very much for your help, If i disabled the hppusg.exe from the msconfig dialog box, does it affect any operation of my printer or the software that work with my printer? Thank.
|
|
|
|
|
No more than it crashing every time it tries (and fails) to start already is.
Today's lesson is brought to you by the word "niggardly". Remember kids, don't attribute to racism what can be explained by Scandinavian language roots.
-- Robert Royall
|
|
|
|
|
Hi,
I have a C code that calls an assembly procedure with a parameter that is a pointer to a structure.
typedef struct _SOMESTRUCT {
ULONG arg1;
CHAR arg2[10];
} SOMESTRUCT, *PSOMESTRUCT;
Then in C code, im calling an assembly proc like this:
SOMESTRUCT mySomeStruct;
ret = AssemblyFunction(&mySomeStruct);
In assembly code, how can i access arg1 and arg2?
Any idea?
|
|
|
|
|
arg1 will be the first N bytes of the struct (n = ulong's size in bytes = 4???) arg2 will be the 10 bytes at the address of the struct + N.
Today's lesson is brought to you by the word "niggardly". Remember kids, don't attribute to racism what can be explained by Scandinavian language roots.
-- Robert Royall
|
|
|
|
|
Here is an example of how to access your struct members utilizing inline assembly. This example will copy a string into the arg2 member of your struct.
typedef struct _SOMESTRUCT
{
ULONG arg1;
CHAR arg2[10];
} SOMESTRUCT, *PSOMESTRUCT;
CHAR szcpy[] = "copy me copy me copy me copy me";
_SOMESTRUCT mySomeStruct = {0};
mySomeStruct.arg1 = strlen(szcpy);
__asm
{
lea ebx, mySomeStruct
mov ecx, [ebx]mySomeStruct.arg1
lea edi, [ebx]mySomeStruct.arg2
lea esi, szcpy
shr ecx,1
rep movsw
adc ecx,ecx
rep movsb
}
Best Wishes,
-David Delaune
|
|
|
|
|
How can i check in Run Time if in current machine that execute my application (exe file) has an active microphone ?
|
|
|
|
|
Please don't cross post in multiple forums.
Simon
|
|
|
|
|
i am using 1Gb D-link Lan cards on my PC's but it shows 100Mb connectivity .... i'v looked into the options there are some like
10 Mb Half Duplex
10 Mb Full Duplex
100 Mb Half Duplex
100 Mb Full Duplex
but there's no 1000Mb option ... anyways i have selected the "Auto Negotiation" option in both but still they connect at 100Mb while m using a cross cable CAT5e between the two.
|
|
|
|
|
They both have to be set to Auto Negotiation to get Gigabit. I've never done a cross connect cable on Gigabit, but, it looks like the quality of the cable is what's going to limit your speeds here. Gigabit requires good Cat5e or Cat6 or better cable. Cat3, 4 and 5 isn't going to do it.
Also, how long is the cable you're using? It should be a minimum of 3 feet and not hanging a bunch of noisy power sources.
|
|
|
|
|
FYI, crossover-cables need to have all 4 pairs crossed for 1000-Base-TX. So, he probably has the wrong kind of cable, which makes the NIC default back to 100-Base-TX
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
You need a Gigabit crossover cable, since Gigabit ethernet uses all 4 pairs. If you are using a normal crossover cable, only 1/3 and 2/6 are crossed, whereas Gigabit requires 1/3, 2/6, 4/7, 5/8 to be crossed.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
I need to find an easy to set up, fair priced, wireless router with a good range, i.e. one office in ex garage, one office on opposite side of house, one office on the house. Probably 50m radius max. I need to install in yesterday already, so my prime requirement is to be able to quickly set it up for a secure network. I have a Proxim Orinoco at home, and still haven't waded into the 200 page manual to do this because it's not well documented, i.e. "How to secure your network".
I also need a wireless transceiver for a Sahara NB 610 laptop. I don't know which is the best route here; PMCIA or USB, but I also need to procure and install before 09h00 tomorrow.
MOD: BTW, the laptop I need a plug-in device for is running Linux. Any caveats there regarding makes and models with poor Linux support?
Last modified: 4hrs 51mins after originally posted --
Do not believe in anything simply because you have heard it. Do not believe in anything simply because it is spoken and rumored by many. Do not believe in anything because it is found written in your religious books. Do not believe in anything merely on the authority of your teachers and elders. Do not believe in traditions because they have been handed down for many generations. But after observation and analysis, when you find anything that agrees with reason and is conducive to the good and benefit of one and all, then accept it and live up to it. (Siddhartha Gautama - The Buddha), 563-483 B.C.
|
|
|
|
|
I can't recommend any specific hardware, but for securing it just use WPA with a good password. Nothing less is sufficient, and any of the extras in a consumer grade setup won't meaningfully improve it (not broadcasting SSID, mac filtering, and WEP are all trivially bypassable).
Today's lesson is brought to you by the word "niggardly". Remember kids, don't attribute to racism what can be explained by Scandinavian language roots.
-- Robert Royall
|
|
|
|
|
Suggest you check out this list of routers that support the DD-WRT open router software. Find the cheapest / most available router and update the router with DD-WRT.
http://www.dd-wrt.com/wiki/index.php/Supported_Devices[^]
DD-WRT exposes all the router capabilities in a consistent interface including allowing you to adjust the router output power. Do read the cautions about the legality of increasing the power.
There are two parts to getting the best range – the router and the computer device. A high power router may not help if the computer device does not have the range to talk back to the router.
For best range on the computer end you may need a WiFi device with an external antenna. That will give you the option of using an antenna cable to relocate the antenna in a better location, or replacing the standard antenna with a more sensitive one or using a directional antenna to improve the range.
There are DIY directional antenna instructions here:
http://www.seattlewireless.net/index.cgi/DirectionalAntenna[^]
As noted above, use WPA protection, but avoid the TKIP implementation. It has recently been at least at least partially cracked. You can use WEP to prevent the casual hacker, but it is totally and quickly crackable if one has the software & hardware.
Good Luck
|
|
|
|
|
Dear everybody,
I really want to simulate a device such as Printer, USB storage.
So i dont know where i could start 
In fact, i have used DSF (Device simulation Framework) of microsoft, but something is not stable as i thought.
I'd like appreciate your help.
xuanthinh
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
