|
|
Can use up to 2TB.
But can format only 32GB, this limit is by design. If you want larger use NTFS, or format using a Boot disk from Windows Me   .
|
|
|
|
|
Dear Friends,
In my Windows 2003 server 64 bit. i have installed all required 64 bit software in that PC. Ms Office 2003 32 bit also.
While uploading excel file. it is getting error also.
Kindly advise me. what are the supporting files i have to install in my server. If it is available from any sites, please post that URL also.
If any prerequsites available for 64 bit, please post that details also.
Thanks & Regards
Haridas.R
Haridas.R
harisofttech@gmail.com
harisofttech@hotmail.com (online)
harizeenet@yahoo.co.in(online)
"Achievement is not a destination, its a journey "
|
|
|
|
|
Haridas.R wrote: While uploading excel file. it is getting error also.
Uploading an Excel file?? From where? What's the error message??
There are no "supporting files" for Office. No prerequisites. No nothing you can download to "makes it work". It just does.
|
|
|
|
|
I've recently gotten interested in the embedded variants of Microsoft Windows. As a Windows XP user I edit a lot of settings both user-wide and service wide. If I have understood correctly then using Windows XP Embedded (which is not the same as Windows Embedded right?) then I can change more settings, edit which components and services get installed (smaller footprint) and edit low-level settings (like optimizing the OS to run of a CF card).
I've been searching for information on what I need, how the setup works, how configuration works, and other nifty options. But I haven't found anything really useful.
Can anyone shine some light on this?
Thanks,
//Johannes
|
|
|
|
|
Embedded XP is basically XP that you've tailored as you want it by choosing which OS components you want in your build. You can download the evaluation edition from Embedded XP SP2[^]. The "120 days from installation" refers to the XPe images you create, not the tool itself. Basically, it creates a set of files that reflect the component choices you have made and those files are placed on your target system and then "installed" to create your OS on the target. The included documentation is pretty good, as MS docs go.
Judy
|
|
|
|
|
Hi, I’m new to windows 2003 DNS server especially with the zone delegation. I understand about the purpose and its overview about zone delegation but what I don’t understand is the record in the zone delegation and the parent zone.
I just want to know how the DNS server manage the record between the parent zone and the delegation zone when there is an overload DNS query on the parent zone? Is it require administrator to update the resource record in the delegation zone manually or any other way to update automatically? How to configure the DNS at the client machine when it is located in an environment that have DNS server store the delegation zone? Thank in advance!!!
|
|
|
|
|
The server(s) hosting the parent zone knows the IP numbers of the servers hosting the delegated zone, and that's enough.
This is normally handled manually.
So if your client computer wants the IP address of www.example.com., it asks the DNS it has preset in its network settings.
If it is hosting the zone or has it cached it simply answers.
Otherwise it asks one of the root servers (.) (which are preset) for a server hosting the .com. zone (unless it's cached already of course).
Checks the .com. zone for the delegation for .example.com. zone.
Asks this server for its zone and looks up what IP www is having and returns this to your client.
If the owner of example.com. needs a subdomain called branchoffice.example.com. it's just another delegation, like .com. has delegated .example.com.
I hope I have answered the right question, and apologies to all people geekier than me if I have oversimplified the matter.
|
|
|
|
|
You can also tell your dns server to forward queries for all or some specific queries such as special domains to dns-servers of your choice, or just use root-servers as Jörgen already said.
this may be useful if you have performance issues.
|
|
|
|
|
Also very useful if you are having a delegated zone, and the parent zone isn't public
|
|
|
|
|
Jörgen Andersson wrote: So if your client computer wants the IP address of www.example.com., it asks the DNS it has preset in its network settings.
So at the DNS IP address of client tcp configuration should we supply an IP address of the parent server or an ip address of the server which hosting the zone delegation? Thank
|
|
|
|
|
Hi, guys!
I'd be really happy if someone could solve my trouble. Here is the story
I've got a home network, with a LAN server, which is also a Internet gateway, has a static IP and gives the internet to the local area computers. One of the local area computers is a Windows 2008 Web Server. In order to connect to it I've added some exceptions on the LAN server, so the ports are redirected from the Lan Server to 2008 Web Server. The problem is that Remote Desktop is not working in this case. Actually, you can access the 2008 Web Server from the LAN computers, but you cannot access it via the Internet (by typing a Static IP of the LAN server)
Thanks for the help,
I really appreciate that
|
|
|
|
|
Open a remote desktop to the LAN server. In this LAN server session you can open a new remote desktop to the webserver.
|
|
|
|
|
I must first apologize as I was not sure where to post this, I could not find the VBScript forum, but it is a simple enough question. How do I point the rundll32 to look on the net. Here is what I got that doesnt work:
args = "printui.dll, PrintUIEntry /if /b ""CSE-211-CLQ"" /f ""labs.circa.ufl.edu/laptopAD/Drivers/7760.inf7760.inf"" /q /r ""CSE-211-CLQ"" /m ""Xerox Phaser 7760GX PS"" /z /u"
If it helps, this is used in Visual Basic 
Thank you in advance.
|
|
|
|
|
You can't. Printui.dll will only use UNC paths, not http protocol sources. You have to copy that file locally first in order to use it.
|
|
|
|
|
OK I was afraid of that, however Why is this not working? It was before, but now for some reason it is not anymore: It add the port just fine in the beginning and seems to rundll32 does not seem to work, when I hand code it in the command prompt, it still does not work. What did I do wrong?
Public Sub ARCATLABBWQ()<br />
'Added on 10/29/2008<br />
proc.StartInfo.FileName = "Cscript.exe"<br />
args = """" & Environment.GetEnvironmentVariable("WINDIR") & "\System32\Printing_Admin_Scripts\en-US\prnport.vbs"" -a -r ARC-ATLAB-BWQ -h at-regulus.ad.ufl.edu -o lpr -q ARC-ATLAB-BWQ"<br />
proc.StartInfo.Arguments = args<br />
proc.Start()<br />
<br />
proc.StartInfo.FileName = "rundll32.exe"<br />
args = "printui.dll, PrintUIEntry /if /b ""ARC-ATLAB-BWQ"" /f ""C:\INF Files\4350.inf"" /q /r ""ARC-ATLAB-BWQ"" /m ""HP LaserJet 4350 PS"" /z /u"<br />
proc.StartInfo.Arguments = args<br />
proc.Start()<br />
<br />
arrInstalled.Add("ARC-ATLAB-BWQ")<br />
'end Added on 10/29/2008<br />
End Sub
|
|
|
|
|
I have no idea why it no longer works, and I can't test anything like this in my environment.
|
|
|
|
|
Is there a method of restoring the original XP product
key number that came with the computer and XP SP2 installation
cd disk that I am using.I was experimenting with changing the
product key and I changed two of the numbers in the ODBETIMER
in the regedit.Then using the magical jellybean program, I got the new product key number.
Then,I reinstalled the xp and when prompted by the XP cd
disk to enter the product key , I entered the new number that I got
from the magical jellybean and I was able to proceed with the new installation.
But,it takes about 75 seconds for my computer to boot up each time I turn it on as compared to about 35 seconds before I changed the product key.The computer operates normally once it boots
up and is still fast to turn off;in about 15 seconds.
The XP does not require activation now.
Also, I notice that I can still use my original product key when prompted by the XP SP2 cd install disk,when reinstalling
the xp operating system; although the jellybean still gives the new product key number if I run the jellybean.
Before I changed two of the "ODBETIMER" digits; I wrote down the digits [22]in total of the original "OBETIMER",before I randomly changed two of the digits manuelly.
I tried re entering the original 22 digits in ODBETIMER ,to see if I could restore the speed of the computer at bootup;but the new scrambled numbers reappeared in the ODBETIMER after booting up and was still a slow 75 second boot up.
I got a couple of fast 35 second bootup by entering all 22 of the original ODBETIMER digits and then, istead of rebooting the computer normally , I pressed the F12 key and and changed the bootup to my XP SP2 cd install disk that allows for a complete new reinstallation with formatting. When the reinstallation was complete; I was able to get a couple of fast bootups[30 to 35] seconds,after installing the graghics and audio drivers from the driver disk. After that,the bootup slowed down to the 75 second range on subsequent reboots whenever I am going to use the computer.
Is there a possibility that that a reset of some sort could be done in the BIOS in the computer with the settings or by taking the battery out of the motherboard briefly and with the power cord diconnected from the 120 volt AC ?
Would a phone call to microsoft be required in order
to get a new product ID number of some sort; as the only solution?
Any suggestions anyone?
- thanks, winch1020
|
|
|
|
|
My suggestion is that you stop messing around trying to disable activation and go out any buy a legal copy of XP.
Doing a full format & reinstall using your original legal product key is enough. Nothing related to windows XP or products keys is stored in the BIOS.
Simon
|
|
|
|
|
The XP SP2 cd disk I am using is a legal copy that Dell
sent to me [it is a 2006 version] so I would have the service pack 2 update and could use it when doing reinstalls on my Dell computer which is legally registered in my name.I had bought the computer from a friend as a used computer because the company he works for was upgrading to new computers and he phoned Dell and re-registered the computer in my name.
Also, from what I have read in various computer articles, there are no differences in any of the XP disks in regards to any particular product key.The determining factor is what product key number has been pre-programmed into each individual computer by the manufacturer before selling the computers.Although, the original product key number can be reset by a computer owner as there are articles on some of the different internet sites that tell you how to change your computers product key number;for example,the microsoft knowledge base is one source of instructions that tell you how to chamge your product key number.
When I wrote in my previous post that my original product key was still working whenever I wanted to reinstall the XP cd; after I had apparently reset the product key number according to the jellybean program;there is a problem using the original product key and that is that after I have reinstalled the XP;and then launch the activation wizard by running the %systemroot%\system32\oobe\msoobe.exe /a routine, the wizard says lets activate windows and when I try activating using the over the internet option; the wizard says "that according to microsoft records ,I have used my product key to many times and that I should phone microsoft to get a new number ".
However, if I do a reinstall of the xp disc and enter the new product key that the magical jellybean program had extracted from my computer;then,after the xp has been reinstalled and I run the activation wizard;the wizard says that the computer is already activated and that I close the wizard.
-winch1020
|
|
|
|
|
Ok, lets just clear this up. It sounds like what you are doing, although not downright illegal, is probably a bit dodgy.
There is no legitimate reason to want to change product keys. What are you trying to achieve?
Different types XP disks are physically different. You can't just change the product key to change from home to professional or any other version. There are also different types of license versions like "Retail" and "Business" which have different keys and activation types. Even if you could, doing so would be illegal, just go and buy the version you want to use.
Why are you trying to bypass/extend the activation? If your copy of XP is legal, just activate it. If it won't let you, phone MS, they will sort the problem out over the phone, it just involves some extra checks to make sure your not stealing it.
The hardware is not linked to the software in _any_ way by dell or any other company. some manufacturers, modify the windows installer so it won't install on any other PC, but that doesn't stop you from formatting your dell PC and putting whatever version of windows you want on it. A full format and full reinstall will revert everything back to how it was to begin with. No product key will be remembered after a format.
My recommendation to you is as follows:
A) If you are happy with the version of XP that you have legally on disk from dell, do a full format and reinstall, use the product key given to you by dell. If it requires activation, activate it, if it doesn't work, call MS.
B) If you are not happy with the version of XP that you have from dell, just go out and buy a version you are happy with.
Simon
|
|
|
|
|
As I stated in my first posting; I was experimenting with the XP.When I read various computer articles that have some xp tweaks,I find some of them interesting and I am curious as to how my computer will respond to them,and the modifications suggested in some of the product key articles were both intersting and easy to apply.
I have done at least 15 to 20 new reinstalls including formatting over the past months on my computer and the XP cd disk has required that the 25 digit product key number be manuelly entered using the keyboard for each of those installations.Are you doing some dodging
yourself when you say that the product key will disappear {are you saying permanently?],after the first reinstallation and formatting that a computer user does with the computer.
I know that the XP SP3 is supposed to automatically fill the product
key in for the computer user ,from what I have read.I downloaded the SP3 when it came out a few months ago but I uninstalled it after about one day because of a few operating system problems it was creating.
- winch1020
|
|
|
|
|
I am posting a spelling correction for a couple of items in my previous posts.
The OOBETimer is the correct spelling; There should be no letter "D" in the word.
The second error was the number 22.There are 24 digits in the data field of the OOBETimer; not 22.
The regedit path to the OObetimer is: HKLM > Software > Microsoft > Windows NT >Current version > WPA Events and the OOBETIMER Dword is located in the right part of the window.
I had read on one of the internet computer sites,that changing at least one of the digits in the OOBETimer data field is one method of resetting the product key in order to get a new product key number.
My XP SP2 cd that has the DELL logo on it, may be considerd legal by DELL, but Microsoft might not recognize the transfer of the XP cd disk to a second party;and if I were to ask Microsoft for a new product key then they might consider the disk as a new purchase with royality rights etc.
Since,my topic has centered around product keys; I will mention one other thing that I have read on one of the internet computer site forums; someone asked if the 30 day activation time parameter could possibly be tweaked and extended to a couple of years or longer etc; but I have read nothing further on it and I forget which of the computer sites that I read the archived forum when I was once browsing the different internet sites.
|
|
|
|
|
Robert Winchell wrote: I had read on one of the internet computer sites,that changing at least one of the digits in the OOBETimer data field is one method of resetting the product key in order to get a new product key number.
Wrong. This does not generate a new product key. It invalidates the activation so you are forced to enter a new key, which you have to provide. There is nothing in Windows that generates a new key for you. In order to get a new key, you either have to buy it off the shelf, or call Microsoft and jump through a ton of hoops to get a new key generated for you.
|
|
|
|
|
I am not going to try and phone microsoft and try and get a new replacement key for free ,as the XP got activated by the new product key that the magical jellybean extracted from the computer or should I say ,generated, when it was doing the extracting and looking for a product key.Maybe,the jellybean has a built in key generator program that turns on when it detects certain changes in files associated to the product key and activation process etc.
I could possibly try some other changes[tweaks] at some point in time to test the effect on the product key and activation process and the bootup time, if I happen to read an article pertaining to it.There are the two WPA files in the system 32 folder.
The longer bootup time is only a minor inconvienance and I think that being able to bypass the activation is pretty neat.If I were to get a new key from microsoft,then I would be less likely to experiment with it.If the activation process should happen to shut down my computer,then I would have to contact microsoft and possibly pay for a new key but for now I think that I will go with the magical jellybean.
- winch1020
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
