Re: Ethernet card - Device Driver - Hardware & Devices Discussion Boards

sharp819-Jan-09 4:36

9-Jan-09 4:36

So when i do a warm boot and then disable and enable in device manager it doesnt work becoz at this point the device already has a wrong MAC-address. One more test I tried out was to disable the device in device manager and enable it again after a warm start but it still doesnt work on that case. In windbg I used the locals to check for the MAC-address value. Is this the only place to do this or what other options would you recommend to check for the MAC-Address changes?

Thanks

Re: Ethernet card - Device Driver

fat_boy9-Jan-09 4:58

fat_boy

9-Jan-09 4:58

Does the device depower when disabled in device manager?

Anyway, the best solution is the one I have suggested. Read the MAC address and if its not zero, store it in the registry. Of it is zero, then get it from the registry.

Morality is indistinguishable from social proscription

Re: Ethernet card - Device Driver

sharp819-Jan-09 5:06

sharp81

9-Jan-09 5:06

I think it does not depower but i am not totally sure either. Becoz if it does depower then it should work just like a cold start. So I guess it doesnt depower and just takes the value available. Though I could see from the debugger that on enabling in device manager it starts the driver initialization again.

You mentioned with a cold start it depowers very fast and is back up again. So why do you think its not a sync problem?

I think i like your solution but the thing I have to make sure changing the code is that there arent any errors. Are there any code snippets for reading and writing Address to registry?

Re: Ethernet card - Device Driver

fat_boy9-Jan-09 5:10

fat_boy

9-Jan-09 5:10

sharp81 wrote:
I think it does not depower but i am not totally sure either. Becoz if it does depower then it should work just like a cold start.

Yes. Unless some other perverse logic is involved, which is possible.

sharp81 wrote:
Though I could see from the debugger that on enabling in device manager it starts the driver initialization again

It always will.

sharp81 wrote:
I think i like your solution but the thing I have to make sure changing the code is that there arent any errors. Are there any code snippets for reading and writing Address to registry?

If you want to be a kernel programmer you are gong to roll your sleves up and get your hands dirty. The DDK might have some samples, but better than to cut and paste, whcih can create all kinds of errors, just read the docs and go for it.

Since its Ethernet, and hence Ndis, look at NdisOpenConfiguration (or NdisOpenConfigurationEx for an ndis 6 driver (ie for vista only))

Its quite simple. You call this from MiniportInitialise (you cant call it at any other time, you get a BSOD if you do) andf then NdisReadConfiguration.

Morality is indistinguishable from social proscription

Re: Ethernet card - Device Driver

sharp8112-Jan-09 23:19

sharp81

12-Jan-09 23:19

I would be really glad if you could let me know how i can get the print of dbgprint commands on my windbg command window. With !dbgprint I am not seeing anything.

Re: Ethernet card - Device Driver [modified]

sharp8113-Jan-09 1:31

sharp81

13-Jan-09 1:31

I managed to setup the dbgprint for windbg and to check for the print logs. During the warm start the system hung up when getting the OID's. And the log from the intialiaze function says "failed to connect to the FW. Timeout exceeded"
Any ideas?

modified on Tuesday, January 13, 2009 7:43 AM

Re: Ethernet card - Device Driver

fat_boy13-Jan-09 2:00

fat_boy

13-Jan-09 2:00

Sometimes ndis throws an exception on start but you can just continue this, it isnt a BSOD stop error.

As for the FW failure it looks like you found the issue, the FW seems to fail to boot on a warm boot. Looks like you have to go back to the HW team or manufacturer and show them what you have seen.

Morality is indistinguishable from social proscription

Re: Ethernet card - Device Driver

sharp8113-Jan-09 2:18

sharp81

13-Jan-09 2:18

actually it doesnt continue .. it just stalls and i need to turn off and turn on the system again. So from the "communication with FW failed error" can I surely say the problem is with FW or?

Re: Ethernet card - Device Driver

fat_boy13-Jan-09 2:21

fat_boy

13-Jan-09 2:21

does the driver hang on to an OID for a long time? If so it should return pending and complete it later. I wouldnt expect this to hang the system though.

As for the FW yes, it is failing to respond to the driver so it looks lke an electrical/FW boot problem. Perhaps the FW crashes?

Morality is indistinguishable from social proscription

Re: Ethernet card - Device Driver

sharp8113-Jan-09 2:47

sharp81

13-Jan-09 2:47

interestingly it booted once without the communication failed error. But still gives wrong MAC address. I am totally confused what's happening

Re: Ethernet card - Device Driver

fat_boy13-Jan-09 2:54

fat_boy

13-Jan-09 2:54

Who makes the HW / FW?

Morality is indistinguishable from social proscription

System Utilities

John.G5-Dec-08 2:22

John.G

5-Dec-08 2:22

when a system is logged in, is there any possibility to know the current login pwd.
where is the system log-in pwd log maintained in Windows 2003 server?

Muthu

Re: System Utilities

Jörgen Andersson5-Dec-08 3:07

Jörgen Andersson

5-Dec-08 3:07

There is no easy way to find out the password.
When you create a password it's hashed and saved in a table together with your username and other data.
So when you log in your tried password is hashed and this hash is compared with the saved hash. If they're equal you're allowed to login.

This hashing algorithm is as far as I know not cracked.
So the only way to find out the password is to keep trying...
That might take a while.

Re: System Utilities

Michael Dunn5-Dec-08 15:20

Michael Dunn

5-Dec-08 15:20

When people ask for security holes as features: Stealing passwords[^]

--Mike--
Visual C++ MVP Cool | :cool:

LINKS~! CP SearchBar v3.0 | C++ Forum FAQ

"That's what's great about doing user interface work. No matter what you do, people will say that what you did was idiotic." -- Raymond Chen

Re: System Utilities

Randor 6-Dec-08 12:30

Randor

6-Dec-08 12:30

You would have to install a custom GINA to handle the user authentication.

Here is an open source GINA which could be modified to do what your asking:

http://www.pgina.org/[^]

Heres one by Keith Brown at MSDN:

Customizing GINA, Part 1[^]

Best Wishes,
-David Delaune

Re: System Utilities

Dave Kreskowiak6-Dec-08 14:41

Dave Kreskowiak

6-Dec-08 14:41

John.G wrote:
when a system is logged in, is there any possibility to know the current login pwd.

No, there isn't.

John.G wrote:
where is the system log-in pwd log maintained in Windows 2003 server?

No, it's not stored in an readable format, and you don't need it for anything.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007, 2008

virtual device driver development

murasoliselvan3-Dec-08 21:45

murasoliselvan

3-Dec-08 21:45

Hi,
I am trying to tap the audio data which is going to play by the player. So i tried to use the virtual audio driver (simple) which is msvad path of WDK. I have couple of questions. Can you help me out?

1.do we have any IDE for building and debugging the kernel mode drivers for windows XP?(like visual studio for any appln)

2.What i have to implement in the copyto or copyfrom functions in the wavecyclic file? and where i have to call these functions to get the data which is going to be played?

3.do you know from where the pcm data is getting played in the audio device?

can you give me some light on this issues?

Thanks,
Muras K
Specialist-R&D,

Re: virtual device driver development

fat_boy5-Dec-08 1:51

fat_boy

5-Dec-08 1:51

murasoliselvan wrote:
Specialist-R&D,

So you should know this already.

Morality is indistinguishable from social proscription

Re: virtual device driver development

murasoliselvan5-Dec-08 2:15

murasoliselvan

5-Dec-08 2:15

Thanks for your superb thinking and reply...
Do u know onething.. Known is drop ; Unknown is Oscean...
So if u know the answer reply to this thread; otherwise do ur business..
thanks
Muras K

Re: virtual device driver development

Randor 6-Dec-08 12:23

Randor

6-Dec-08 12:23

murasoliselvan wrote:
1.do we have any IDE for building

It is possible to setup Visual Studio to develop device drivers with full intellisense and class view. You may have to tweak a few things to get it working.

DDKBUILD - Integrating the Windows DDK with Visual Studio .Net[^]

murasoliselvan wrote:
and debugging the kernel mode drivers for windows XP

Install Debugging Tools for Windows 32-bit Version[^]

After installing WinDbg you may want to connect to VirtualPC or VMWare. I have better success with VMWare as it has greater hardware support at the moment. I'm sure Microsoft will grow into the dominate virtualization technology eventually, but they are not quite there yet.

Debugging with VirtualPC:

Tip: Kernel Debugging a VPC Server[^]

with VMWare:

Driver Debugging with WinDbg and VMWare[^]

murasoliselvan wrote:

2.What i have to implement in the copyto or copyfrom functions in the wavecyclic file? and where i have to call these functions to get the data which is going to be played?

I believe you can just RtlCopyBytes directly from the IDmaChannel buffer inside the CopyTo function into your allocated buffer. You do not need to call this CopyTo function. You will need to select your "msvad sample" as the sound playback device.

Some links:

http://msdn.microsoft.com/en-us/library/ms790517.aspx[^]
http://msdn.microsoft.com/en-us/library/ms791820.aspx[^]

Best Wishes,
-David Delaune

Re: virtual device driver development

murasoliselvan8-Dec-08 21:21

murasoliselvan

8-Dec-08 21:21

Hi David,
Thanks for your reply.
Now i could able to tap the playback data and i could able to write the data in the .wav file format using the msvad - simple virtual audio driver.I have some doubts on this.

1. Is it possible to write the PCM raw data ? By default they are writing in the .wav file format, i have changed the writeheader length as zero and i got some raw pcm data kind of thing. Is this the right way to write the raw PCM data? How i have to check the data ithat i am getting is the PCM data?

2. Is it possible to convert the attributes of PCM data which i am getting from the copyto function into my required attributes? eg,By default i am getting 44.1k sample data in the 32 bit PCM mono format. but my required attributes are 8kHz sample data 8bit or 16bit mono format. Is it possible to convert onthe fly?

3. If i want to tap the playback data from the multiple input streams(let us say , i m playing ten songs from ten separate media player) what i have to do? I tired with simple virtual audio driver by same scenario what i have given above, but i m getting the output file with mixing of all the data. what i have to do for this?

i have also tried to install the "Multstr "driver which is in msvad folder and played multiple streams, with the use of multistr driver ,but i m getting mixed playback data? can u help me out to capture the multiple playback data simultaneously?

Thanks
Muras K

in need of Drivers [modified]

AndyInUK30-Nov-08 2:09

AndyInUK

30-Nov-08 2:09

Hi,

I have got a Sony Vaio PCG-7A2L(VGN-FS645P)notebook, just reformatted the system and now i am badly in a need for drivers.

I have some how managed to install wireless driver and internet is working now but there is no audio drivers i can find.

I have gone through this site http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGNFS645P[^]
but after installing the audio drivers, its not working.

In Device manager i am getting question mark for the following :-

Mass Storage Controller
PCI Device
Video Controller
Video Controller(VGA Compatible)
USB Controller

Any help would be greatly appreciated.

Thanks a ton.

modified on Sunday, November 30, 2008 5:28 PM

Re: in need of Drivers

peterchen30-Nov-08 3:20

peterchen

30-Nov-08 3:20

And here I sit, thinking about ordering pizza from you...

Burning Chrome ^ | Linkify!| FoldWithUs! | sighist

Re: in need of Drivers

#realJSOP30-Nov-08 3:24

#realJSOP

30-Nov-08 3:24

Try this forum:

http://forum.notebookreview.com/[^]

There are user-support forums for all major brands.

"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001

Re: in need of Drivers

Graham Bradshaw30-Nov-08 3:49

Graham Bradshaw

30-Nov-08 3:49

Have you installed the base packages? There's some other packages that need to be installed for the drivers to work.

From your link, I would make sure the Motherboard chipset controller and the four packages from "System Components" are installed, and the machine rebooted, before installing the drivers.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.