Re: diff in need of method overloading * cons overloading - C# Discussion Boards

c# windows datagridview [modified]

26-Jan-09 7:46

A basic tutorial of operator overloading is in Operator Overloading Tutorial[^]. Note that many operators must be overloaded in 'pairs'. For example if you overload == operator you must overload != operator. The same goes with < and > operators.

What comes to interfaces, I think you could start here: Interfaces (C# Programming Guide)[^]

Hope they help you.

The need to optimize rises from a bad design.My articles[^]

s_aslam9825-Jan-09 5:53

s_aslam98

25-Jan-09 5:53

i want to convert a column look into table look.Can any body tel me how to do this?
e.g.datagridview having 2 columns

name address
arshadaslam pk
to look like

name address
first Last
arshad aslam pk
which now have three columns:first,last,address.

modified on Sunday, January 25, 2009 12:10 PM

inserting more format into one line in word using C#

Lopy12325-Jan-09 4:32

Lopy123

25-Jan-09 4:32

Hi, I am trying to figure out insert text with different format(bold, regular, italic) into line. I am looking for whole weekend but no result. Plese help me. Thanx in Advance.

Here is my code:

using Word = Microsoft.Office.Interop.Word;
using System.Reflection;
            object oMissing = System.Reflection.Missing.Value;
            object oEndOfDoc = "\\endofdoc"; /* \endofdoc is a predefined bookmark */

            //Start Word and create a new document.
            Word._Application oWord;
            Word._Document oDoc;
            oWord = new Word.Application();
            oWord.Visible = true;
            oDoc = oWord.Documents.Add(ref oMissing, ref oMissing,
                ref oMissing, ref oMissing);

             Word.Paragraph oPara6;
            //oPara6.Range.in
            oRng = oDoc.Bookmarks.get_Item(ref oEndOfDoc).Range;
            oPara6 = oDoc.Content.Paragraphs.Add(ref oRng);
            oPara6.Range.InsertAfter("  ahoja");
            oPara6.Alignment = Microsoft.Office.Interop.Word.WdParagraphAlignment.wdAlignParagraphCenter;
            oPara6.Range.Font.Size = 12;
       
            oPara6.Format.SpaceAfter = 5;
            oPara6.Range.Font.Bold = 1;
            oPara6.Range.Text = "Vymezení jednotek v budovì";
                 
         
            oPara6.Range.InsertParagraphBefore();

            oPara6.Range.InsertBefore("ahoja ");
            oPara6.Range.InsertBefore("ahoja ");
            oPara6.Range.InsertParagraphAfter();
           // oPara6.Range.Font.Bold = 1;
            oPara6.Range.InsertBefore("ahoja ");
            oPara6.Range.InsertBefore("ahoja ");
           // oPara6.Range.Font.Bold = 0;
            oPara6.Range.FormattedText.End = 0;
            oPara6.Range.FormattedText.Bold = 1;
            oPara6.Range.Text = "Vymezení jednotek v budovì";
            oPara6.Range.InsertAfter("ahoja ");
           // oPara6.Range.Font.Bold = 1;
            oPara6.Range.InsertBefore("ahoja ");
            oPara6.Range.InsertParagraphBefore();
            //oPara6.Range.Font.Bold = 0;

Regular Expressions

the_jat25-Jan-09 3:49

the_jat

25-Jan-09 3:49

Hi! everyone,

Regular Expression sometimes match empty strings, can someone tell me why it happens and what is the use of matching empty strings(why have the original designers made it that way)? Here are some examples:

In these examples, the "Pattern" is the Pattern used for matching and the "MatchWith" is the string that is evaluated. The "Count" is the number of hits, and finally "Occurrences" lists all of them. Following is the output of a console application.

Pattern: \d*
MatchWith: 34544
String: 34544,  Pattern: \d*,   Match: |TRUE|
M String: 34544,        Position: 0,    Count: 2,       S Length: 5
Occurences:
String: 34544,  Length: 5,      Position: 0,    Success: True
String: ,       Length: 0,      Position: 5,    Success: True
-------------------------------------------------------

The above example matches an empty string, why?

Pattern: \d*
MatchWith: dfgdr
String: dfgdr,  Pattern: \d*,   Match: |TRUE|
M String: ,     Position: 0,    Count: 6,       S Length: 5
Occurences:
String: ,       Length: 0,      Position: 0,    Success: True
String: ,       Length: 0,      Position: 1,    Success: True
String: ,       Length: 0,      Position: 2,    Success: True
String: ,       Length: 0,      Position: 3,    Success: True
String: ,       Length: 0,      Position: 4,    Success: True
String: ,       Length: 0,      Position: 5,    Success: True
-------------------------------------------------------

The above example matches 6 empty strings, more than the actual length of the input string, why?

Following are examples of Lookahead:

Pattern: (?=.*\d)
MatchWith: 44
String: 44,     Pattern: (?=.*\d),      Match: |TRUE|
M String: ,     Position: 0,    Count: 2,       S Length: 2
Occurences:
String: ,       Length: 0,      Position: 0,    Success: True
String: ,       Length: 0,      Position: 1,    Success: True
-------------------------------------------------------

Above: again an empty string.

Pattern: (?=.*\d)
MatchWith: dfg
String: dfg,    Pattern: (?=.*\d),      Match: |FALSE|
M String: ,     Position: 0,    Count: 0,       S Length: 3
Occurences:
-------------------------------------------------------

Above: same failed with strings as input: "FALSE"

Pattern: (?=.*\d)
MatchWith: fgd3
String: fgd3,   Pattern: (?=.*\d),      Match: |TRUE|
M String: ,     Position: 0,    Count: 4,       S Length: 4
Occurences:
String: ,       Length: 0,      Position: 0,    Success: True
String: ,       Length: 0,      Position: 1,    Success: True
String: ,       Length: 0,      Position: 2,    Success: True
String: ,       Length: 0,      Position: 3,    Success: True
-------------------------------------------------------

Above: same pattern, but now matches of empty string

Thats all
Thanks Smile | :)

Re: Regular Expressions

Guffa25-Jan-09 5:13

Guffa

25-Jan-09 5:13

Because you have specified that it should allow a zero count. The * is the same as {0,} which specifies that the pattern should match zero or more times.

Despite everything, the person most likely to be fooling you next is yourself.

diff in need of method overloading * cons overloading

Ali_10024-Jan-09 23:58

Ali_100

24-Jan-09 23:58

I m new in .net
wel i want to know the diff. between M.overloading & C.overloading

i think ,, we can use the method after cons.overloaded by only method overloading???

& mainly ,what is the need we use or prefer them,, ??

reply me in detail

kindly reply ,,
Regards waqar

Re: diff in need of method overloading * cons overloading

DaveyM6925-Jan-09 0:12

DaveyM69

25-Jan-09 0:12

Do you mean method overloading and constructor overloading?

They are much the same, except constructor overloading enables you to create your object instances from different signatures that cn be used for initialization. Method overloading enables different method implementations to be called depending on the signature.

Dave
BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)

Preventing filedestruction after saving richtextbox contents at program end

fracalifa24-Jan-09 23:31

Re: Preventing filedestruction after saving richtextbox contents at program end

24-Jan-09 23:31

Hi all,

the last operation of my program is to store the contents of a richtextbox to a file.
Often the contents of the file will be destroyed.
Saving by hand (button) never destroys the contents.
So it seems that the saving task (asynchronious ???) will be finished too soon at the end of my program.
I inserted a sleeptime to prevent the destruction an to give the savetask the time it needs but that's no solution steadily.

How can I detect, the end of the savetask of the richtextbox before finishing the program ?

tnx
Frank

Wendelius25-Jan-09 0:05

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 0:05

Since the saving can be performed in numerous ways, it's impossible to pinpoint the problem without seeing the code. One reason could be that you don't close the stream, but as said, please post the code.

The need to optimize rises from a bad design.My articles[^]

fracalifa25-Jan-09 0:26

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 0:26

I am simply using the safefile method of the richtextbox control, that's all.

rtxt.SaveFile(Application.StartupPath + "\\log.rtf");

and rtxt is from type System.Windows.Forms.RichTextBox

I did'nt found a method for the RTB like .flush or .close to finish the stream securely.

tnx

DaveyM6925-Jan-09 0:32

DaveyM69

25-Jan-09 0:32

Try this in your FormClosing event handler:

using (System.IO.Stream stream = new System.IO.FileStream(
    Application.StartupPath + @"\log.rtf", System.IO.FileMode.Create))
{
    rtxt.SaveFile(stream, RichTextBoxStreamType.RichText);
}

Dave
BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)

Re: Preventing filedestruction after saving richtextbox contents at program end

fracalifa25-Jan-09 0:59

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 0:59

Thank you,

that sounds good, I will try this.

tnx Frank

Wendelius25-Jan-09 0:35

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 0:35

That should work fine but at which point are you calling this? Is the contents of rtxt possibly destroyed?

The need to optimize rises from a bad design.My articles[^]

fracalifa25-Jan-09 0:56

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 0:56

I call the method as last instruction in the method main[].

tnx frank

Wendelius25-Jan-09 1:02

Re: Preventing filedestruction after saving richtextbox contents at program end

25-Jan-09 1:02

At that point you won't have anything to save. Use FormClosed event instead and save the contents of the control in that event.

The need to optimize rises from a bad design.My articles[^]

DaveyM6925-Jan-09 0:07

DaveyM69

25-Jan-09 0:07

Works fine for me. Where are you calling the SaveFile method from (which event - FormClosing?). Which overload of SaveFile are you using?

Dave
BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)

Data binding

half-life24-Jan-09 22:42

24-Jan-09 22:42

Hi,

i've bounded a TextBox, DateTimePicker and NumericUpDown to a database Via a BindingSource
the thing is that when i change one of the values nothing happens

here is the ButtonClickEvent that should Update the DB

private void button1_Click(object sender, EventArgs e)
{
    t_AppTableAdapter.Update(dataSet2.T_App.Rows[0]);
    dataSet2.AcceptChanges();
}

where do i go wrong??

Have Fun
Never forget it

Wendelius25-Jan-09 0:03

25-Jan-09 0:03

First, set a breakpoint to

t_AppTableAdapter.Update(dataSet2.T_App.Rows[0]);

and check the RowStates and that they are Modified.

If the RowState isn't set, the problem is most likely in binding.

Also the Update method takes a datatable or a datarow array as a parameter. Now you pass only one row. If you want to update all the modifications in the datatable, call:

t_AppTableAdapter.Update(dataSet2.T_App);

The need to optimize rises from a bad design.My articles[^]

half-life25-Jan-09 0:40

25-Jan-09 0:40

Thanks ,

the DataRowState remains "unchanged"
do u know what could be the problem in the bindingsource???

Smile | :)

Have Fun
Never forget it

Wendelius25-Jan-09 0:51

25-Jan-09 0:51

First you could check that just after modifying a value in a control, the datatable contains the change (and the rowstate is Modified). If the modification is not reflected correctly to the datatable, your control binding isn't correctly.

If the modification is visible in the datatable, then I would suspect that you call either AcceptChanges or RejectChanges somewhere before you call the DataAdapter.Update.

Also it could be possible that you have binded a datatable to the controls, but you are actually trying to save a different datatable (a copy?).

The need to optimize rises from a bad design.My articles[^]

half-life25-Jan-09 1:20

25-Jan-09 1:20

Thanks

but the thing is that the modification is visible,

i can see the dataset.table.rows[0].itemarray[0...].values changing before and after i call the update method and the acceptchanges method Frown | :(

i do not call updatechanges(), certainly not rejectchanges() Before the update method

what do u mean by a copy?? of the datatable,
i've created it once and been using it all along (via the wizard... Add DataBase...)

i think i'm missing somthing maybe in the basics of the concept
Frown | :(

but yet again thanks alot for the help Smile | :)

Have Fun
Never forget it

Wendelius25-Jan-09 1:34

25-Jan-09 1:34

Ok.

I'm a bit confused since in your earlier post you said that the rowstate was not modified before calling update? So are these correct observations:
- you change the data using a control
- immediately after that, your datatable contains a record with RowState = Modified
- when you come to the point where you call adapter's Update, your datatable doesn't have a record which is Modified?

Also remember that if your datatable contains more than one record, you originally updated only the row at index 0 (t_AppTableAdapter.Update(dataSet2.T_App.Rows[0]);) maybe the record you modified using UI isn't that record. For that reason you should always call t_AppTableAdapter.Update(dataSet2.T_App);

When I wrote about the copy, I meant that is it possible that you actually have two different datatables. Changes are made to one datatable but update is called using another. But if you're sure that you have only one datatable, then this won't be an issue.

The need to optimize rises from a bad design.My articles[^]

half-life25-Jan-09 1:51

25-Jan-09 1:51

Here is the symptom step by step

1. i change the value of a textbox bound to column in table (this table has only 1 Row)
2. before i call the adapter's update method i can see that value has been cahnged in the dataset.
3. after i finish the update the rowstate still stays unchanged, only after i call the acceptchanges the rowstate changes but yet no affect on the *.mdb tables

the dataset is updated but not the data base itself

Frown | :(

Have Fun
Never forget it

Wendelius25-Jan-09 1:57