|
Hey Anish,
If you can give more details like what controls are you using or any specific code that you suspect to be the culprit , because its hard to find out any thing on the information you have mentioned , the information is too generic , to think of a solution
-Regards
Bharat Jain
bharat.jain.nagpur@gmail.com
|
|
|
|
|
Thank you for replay
here we are used, the database interact with GUI. and
used DirectXCapture dll for recording a file in wma format. so two thread are
run concurrently.
But we used lot of GUI Component.
|
|
|
|
|
http://www.itwriting.com/dotnetmem.php[^]
Task manager does give an accurate picture of how much memory your app is using. Use Perfmon as described in the article.
Cheers,
Vıkram.
I've never ever worked anywhere where there has not been someone who given the choice I would not work with again. It's a job, you do your work, put up with the people you don't like, accept there are probably people there that don't like you a lot, and look forward to the weekends.
- Josh Gray.
|
|
|
|
|
Vikram A Punathambekar wrote: Task manager does give an accurate picture of how much memory your app is using.
You forgot the "not" in "Task manager does not give an accurate picture of how much memory your app is using.".
Despite everything, the person most likely to be fooling you next is yourself.
modified on Tuesday, January 27, 2009 7:41 PM
|
|
|
|
|
Whoops! You have a sharp eye, thanks!
Cheers,
Vıkram.
I've never ever worked anywhere where there has not been someone who given the choice I would not work with again. It's a job, you do your work, put up with the people you don't like, accept there are probably people there that don't like you a lot, and look forward to the weekends.
- Josh Gray.
|
|
|
|
|
anishkannan wrote: I am new in c# application. i want to Control memory leak and not exceed 30mb in Task manager memory status.
As mentioned in the thread, the task manager does not give you an accurate measure of the amount of memory used.
As you are new to C# you are probably new to how the .NET memory management works. It allocates more memory if needed, but does not return it just because it's unused at the moment, but rather when the system needs it.
A system doesn't run better from having a lot of unused memory. On the contrary, trying to minimise the memory usage when there is no need for the memory is just unnecessary work for the system.
anishkannan wrote: now in our application the memory status is 42mb. memory size will rise if open a new GUI.
But the memory size suddenly low up to 5~10mb if minimize that GUI.
That is perfectly normal. When you minimise the application, the system sends a signal to it to try to free up some unused memory.
anishkannan wrote: And how can handle this.
It doesn't need handling. The memory management in .NET takes care of it all.
anishkannan wrote: where i written That( Garbage collection) code.
Don't mess with the garbage collector unless you really have an actual memory management problem. That is quite rare, and your situation is definitely not it.
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
Hi all,
I am trying to create a XML using DataSet.WriteXml.
The XML was created, but its not creating any node for NULLs.
I also tried by query
"SELECT (SELECT * FROM TBL_NAME FOR XML AUTO, ELEMENTS XSINIL) "
but the out put structure was changed. For bulk copy to SQL its not supporting due the columnnames were not matching.
Please suggest me how to create a XML including NULLs.
Thanks in advance.
|
|
|
|
|
Dunno, I've never used DataSet.WriteXml; for that matter, I rarely use a DataSet.
I suggest using an XmlDocument or XmlTextWriter to create XML files.
What I generally do for nulls is have an IsNull attribute that I can set:
<SomeValue IsNull="false" >blah</SomeValue>
<SomeValue IsNull="false" />
<SomeValue IsNull="true" />
|
|
|
|
|
Hello all,
i have the requirement to Extract data from image. can u plz help me out with the code.
I am strugling to extract data from image file using C# (.net 2.0)
For Ex: I have an image with a number.. I need process the image and extract the number and store it in sql DB.
Please help me for this implementation using C#.
Thanks
|
|
|
|
|
What kind of extraction are you talking about?
If it's simply a number presented as an image, google for OCR libraries. If the data is hidden in your images, google for steganography. Also, Corinna John has an excellent set of articles on the latter, here at CodeProject.
Cheers,
Vıkram.
I've never ever worked anywhere where there has not been someone who given the choice I would not work with again. It's a job, you do your work, put up with the people you don't like, accept there are probably people there that don't like you a lot, and look forward to the weekends.
- Josh Gray.
|
|
|
|
|
|
I need to extract the text from image file. The image file may contain text embedded with the image.
|
|
|
|
|
Did you actually read the post you just replied to? He told you what you need to do, and even posted useful links!
|
|
|
|
|
i want to change the background color of an image in that way that only visible part get new background color, is there any in built function for this ? well, i tried with this but i dont know what to do next
Bitmap bmp = new Bitmap("C:\abc.png");
for (int x = 0; x < bmp.Width; x++)
{
for (int y = 0; y < bmp.Height; y++)
{
Color tmp_oldColor = bmp.GetPixel(x, y);
if (tmp_oldColor != Color.Transparent)
{
Color tmp_newColor = ??;
tmp_newColor.A = tmp_oldColor.A;
bmp.SetPixel(x, y, tmp_newColor);
}
}
}
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
As you are not using the transparency to determine background color, what do you want the background color to be?
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
hmmm....my mistake, i wrote "change". The actual thing is that the image is transparent, like vista glass and but have some shapes on it those are tranparent too and i want to set its backcolor, like green, blue or any. That my question.
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
Ok, create a new bitmap with the same size, create a graphics object for it using Graphics.FromImage, fill the image with the background image using the Clear method and draw your image on it using the DrawImage method.
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
No, you misunderstood, here is some example
Transparent Image
Added Red Back Color
now see the last image, i added color red but i just want color back to the image, not in entire image
i can do something nearly, Fill a rectangle with Red color, draw image then use MakeTransparent(Color.Red) but it wont do exactly what i want, it will not set alpha. My image wont be transparent anymore.
the otherway i can use is : (just wrote directly, not tested)
Bitmap bmp = new Bitmap(ofd.FileName);
Bitmap bmp_backColor = new Bitmap(bmp.Width, bmp.Height);
for (int x = 0; x < bmp.Width; x++)
{
for (int y = 0; y < bmp.Height; y++)
{
Color tmp_oldColor = bmp.GetPixel(x, y);
if (tmp_oldColor != Color.Transparent)
{
Color tmp_newColor = Color.FromArgb(tmp_oldColor.A, 255, 0, 0);
bmp_backColor.SetPixel(x, y, tmp_newColor);
}
}
}
Graphics m_gr = Graphics.FromImage(bmp_backColor);
m_gr.DrawImage(bmp, 0, 0, bmp.Width, bmp.Height);
m_gr.Dispose();
pictureBox1.BackgroundImage = bmp_backColor;
Is this way right ?
Modified :
I updated the code with working one,
The Working Output
My question, is that the only way or is that way good ?
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
modified on Tuesday, January 27, 2009 4:21 AM
|
|
|
|
|
Xmen wrote: Color tmp_newColor = ??; // how to get new color ? Multiply, Add ?
Color tmp_newColor = Color.Green;
or Color.FromArgb(....)
or Color.FromName(...)
or Color.FromKnownName(...)
choose whatever...
HTH
[Modified]
one more thing, you are using GetPixel and SetPixel which are extremely slow. try using LockBits() and UnlockBits() for speed.
[/Modified]
regards
|
|
|
|
|
PandemoniumPasha wrote: Color tmp_newColor = Color.Green;or Color.FromArgb(....)or Color.FromName(...)or Color.FromKnownName(...)choose whatever...
this is not that simple, i have to calculate the RGB values for new color.
PandemoniumPasha wrote: one more thing, you are using GetPixel and SetPixel which are extremely slow. try using LockBits() and UnlockBits() for speed.
thanks for the info 
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
Hello all.
I'm working on a portion of a program I'm writing that involves creating new rows in a table that has no primary key and two foreign keys. The rows in the datatable are invoice details for rented items. I want to be able to get this new row and place it's contents in a listbox, followed up by a number of similar new rows in the same listbox.
I'm not sure how (if it's possible,) to retrieve the new row since it has no primary key. I'm also not sure then how to associate the datarow with it's respective item in the listbox.
My hope is to be able to, when necessary, select the item in the listbox and use it to delete the row it's associated with from the datatable.
I'm going out on a limb here hoping someone might have some advice or can point me in the right direction. Any help would be hugely appreciated. Thanks in advance!
|
|
|
|
|
Lodeclaw wrote: I'm writing that involves creating new rows in a table that has no primary key and two foreign keys
Isn't there any natural key present? Also could you create a key column in your datatable and let the datatable to generate a unique value to it?
Lodeclaw wrote: followed up by a number of similar new rows in the same listbox
How do you recognize similarity?
Lodeclaw wrote: I'm also not sure then how to associate the datarow with it's respective item in the listbox
If I understood correctly your problem in this, you would use ValueMember[^] definition in your binding.
Lodeclaw wrote: use it to delete the row it's associated with from the datatable
When the listbox is binded to the datatable, you would actually delete the row from the datatable. The listbox reflects the changes in your datatable.
|
|
|
|
|
Hi friends
How switch on computer in C# codes with any key which ı set key. ı am sorry about I speak a bit English
|
|
|
|
|
Wow, that's a fantastic question 
modified 12-Sep-18 21:01pm.
|
|
|
|
|
Because .NET needs to be on and running in the Windows environment BEFORE any program can be run. It is not possible to turn on computer based on any key. It is, however, possible (don't ask me how) to remotely turn on a computer with some BIOS "Wake on LAN" setting. I have no clue how this would be set through C# programming though.
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my Blog
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
