|
i need that parameter in my report to pass the vehicle_id bt I need to pass the value from my C# project unless there is a better way to do it.
|
|
|
|
|
jrahma wrote: I need to pass the value from my C# project
You can set the value of a parameter field with code somewhat like this:
ParameterDiscreteValue paramValue = new ParameterDiscreteValue();
paramValue.Value = 1;
rptDoc.ParameterFields["vehicle_id"].CurrentValues.Add(paramValue);
jrahma wrote: unless there is a better way to do it
Don't know what you have as data in the dataset you use as a datasource, but couldn't the stored procedure return the parameter value it receives as part of the data it returns? This way you would always have the vehicle_id in the data.
|
|
|
|
|
I have a double[,] two dimensional array that i would like to display and edit in a DataGridView control, but I am having difficulty binding the data to the DataGridView control. Can someone point me in the right direction on how to do this?
- henrik
|
|
|
|
|
Hi,
Does your array implements IList interface?
|
|
|
|
|
No it does not, but if implementing IList solved my problem then perhaps I will need to do this. How would I proceed if the IList interface is implemented?
- Henrik
|
|
|
|
|
Hi,
Can anyone trace out where is the error
lstListView.DoubleClick += new EventHandler(this.lstEditDoubleClick);
txtSubItem.KeyPress += new KeyPressEventHandler(this.txtEditOver);
lstListView.MouseDown += new MouseEventHandler(this.lstEditMouseDown);
public void lstEditMouseDown(object sender, MouseEventArgs e)
{
ListViewItem item = lstListView.GetItemAt(e.X, e.Y);
X = e.X;
Y = e.Y;
}
private void lstEditDoubleClick(object sender, EventArgs e)
{
int nStart = X;
int spos = 0;
int epos = lstListView.Columns[0].Width;
for (int i = 0; i < lstListView.Columns.Count; i++)
{
spos = epos + X;
epos += lstListView.Columns[3].Width;
}
subItemText = lstListView.SelectedItems[0].SubItems[3].Text;
Rectangle r = new Rectangle(spos, lstListView.SelectedItems[0].SubItems[3].Bounds.Y, epos, lstListView.SelectedItems[0].SubItems[3].Bounds.Bottom);
txtSubItem.Size = new System.Drawing.Size(epos - spos, lstListView.SelectedItems[0].SubItems[3].Bounds.Bottom - lstListView.SelectedItems[0].SubItems[3].Bounds.Top);
txtSubItem.Location = new System.Drawing.Point(spos, lstListView.SelectedItems[0].SubItems[3].Bounds.Y);
txtSubItem.Show();
txtSubItem.Text = subItemText;
}
private void txtEditOver(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == 13)
{
lstListView.SelectedItems[0].SubItems[3].Text = txtSubItem.Text;
txtSubItem.Hide();
}
if (e.KeyChar == 27)
txtSubItem.Hide();
}
|
|
|
|
|
It would greatly help if you tell what kind of error you have? Exception (what exception, where), something not working the way you want etc.
|
|
|
|
|
Udayaraju wrote: Can anyone trace out where is the error
Not without you telling us what the error is, which line it occurs, what the results are and what the expected results are...
|
|
|
|
|
Hi,
Here I am trying to edit value in lstListView.SelectedItems[0].SubItems[3] column.
The textbox I have placed is not displayed at that coulmn position. I have done with all the possibilites but unable to place the textbox in required Location.
The position of textbox is not displayed in required column.
|
|
|
|
|
Bitmap bmp = new Bitmap(ofd.FileName);
Bitmap bmp_backColor = new Bitmap(bmp.Width, bmp.Height);
for (int x = 0; x < bmp.Width; x++)
{
for (int y = 0; y < bmp.Height; y++)
{
Color tmp_oldColor = bmp.GetPixel(x, y);
if (tmp_oldColor != Color.Transparent)
{
Color tmp_newColor = Color.FromArgb(tmp_oldColor.A, Color.Red);
bmp_backColor.SetPixel(x, y, tmp_newColor);
}
}
}
Graphics m_gr = Graphics.FromImage(bmp_backColor);
m_gr.DrawImage(bmp, 0, 0, bmp.Width, bmp.Height);
m_gr.Dispose();
pictureBox1.BackgroundImage = bmp_backColor;
I've written this code to set a red backcolor to any image's visible pixels(specially for half tranparent) but its very very slow, any way to boost the code
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
Try this[^]
Be careful, there is no Undo Button(Ctrl+Z) in life.
|
|
|
|
|
ok, if i add Alpha in struct and other things too then will it work ?
thanks
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
Xmen wrote: ok, if i add Alpha in struct and other things too then will it work ?
I haven't tried adding alpha and other filter in unsafe, I was just setting the pixel to gray in order to make the whole image as grayscale image. Yes one thing I am sure using unsafe in get and set pixel makes it very fast. 
Be careful, there is no Undo Button(Ctrl+Z) in life.
|
|
|
|
|
Use unsafe pointers as explained here[^].
egards
modified 12-Sep-18 21:01pm.
|
|
|
|
|
that looks awesome man, i will try that later 
thanks you both
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
hello.. i have a windows form and a windows service running.... how can i pass parameters or make a comunication between them so that the windows form can pass arguments to the service .... both devoloped in c#
|
|
|
|
|
You can use named pipes or .net remoting
|
|
|
|
|
thanks for the sugession.,...
|
|
|
|
|
You are welcome
|
|
|
|
|
Hello Experts,
I need sample code how do i adjust width in excel in server with out installing excel in server machine. Can any one give Us sample code .
|
|
|
|
|
You want to edit excel documents without office installed? I don't know if you can, but I am sure you will need the office XP PIA's[^] to do that, assuming it is possible...
|
|
|
|
|
vikram_asv wrote: I need sample code how do i adjust width in excel in server with out installing excel in server machine
Don't know what you mean by width, but if you're using Excel 2007, you can manipulate (and create) the workbooks without excel since the files are basically zipped xml files. For more info, have a look at: http://www.codeproject.com/KB/office/OpenXML.aspx[^].
If you're using older versions of excel, you will either need to install the excel or use SpreadsheetML. In that case, look: Dive into SpreadsheetML (Part 1 of 2)[^]
|
|
|
|
|
Hi,
this is probably an easy one too...
When I try to send an email notification, I get an error, saying the virtual machine is not properly configured to send emails....
I found a document saying I have to edit the web.config within the \program files -directory of the Foundation Server-..... which I did.
But the error is still the same
any suggestions how to get this going?
Thanks
Cheers
Piratenwichtl
|
|
|
|
|
Hi,
I am new to Team Foundation Server.. so its probably an easy question.. anyway I am not able to find out whats wrong.
1. I installed Team Foundation Server successfully... sweet!
2. I then installed Team Explorer
3. I opened the Web-Portal and started to configure it...
what puzzles me is -- I got tasks within my Team Explorer and I got tasks within my Web-Portal. I would have thought if you enter a task, doesnt matter where, that you would find it on both ends, in the team explorer AND the web portal.
But the tasks I add to my team explorer are not visible from the web portal and vice versa.
Why is this? Am I doing something wrong?
Please help me
Cheers
Piratenwichtl
|
|
|
|
|
Sorry, I don't see the connection with C#.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
