|
Is that file on your local file system? If so, then simply try using FileExists[^] to check if it is there before trying to open it in your browser.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Hello,
no, its a web file. I just want to be able to open the file successfully...ShellExecute("open","http:\\www.gooogle.com"..) will return as successful even though it might not be there or no contents displayed.. I would like to check the valididty of the URL before opening it in other words.
Thanks
sft
|
|
|
|
|
I believe ShellExecute itself will only report you if it could run the specified/associated application/command, and since you specified something starting with http:\\, it will run the associated browser and feed this to it, and since it CAN run the browser it will say "success", it doesn't care what the browser actually does with the URL. I doubt you can check if the URL is valid or not by using ShellExecute, you will have to either try finding some library or class or such that checks if an URL is valid or not for you, or you will have to do the check yourself. Of course i could be wrong...
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
|
INT WSAInstallServiceClass(
__in LPWSASERVICECLASSINFO lpServiceClassInfo
);
typedef struct _WSAServiceClassInfo {
LPGUID lpServiceClassId;
LPTSTR lpszServiceClassName;
DWORD dwCount; LPWSANSCLASSINFO lpClassInfos;
} WSASERVICECLASSINFO, *PWSASERVICECLASSINFOW;
Just a collection of WSANSCLASSINFO?
And the programmer needs to keep the array of WSANSCLASSINFO consistant
(hold some common attributes that make sense to the service class)?
It seems that the consistency is not promised, in another word, the inconsistency can't be detected
mechanically.
============================================
Here is a sample in the book,
the content of the array aNameSpaceClassInfo seems arbitrary, does it?
WSASERVICECLASSINFO sci;
WSANSCLASSINFO aNameSpaceClassInfo[4];
DWORD dwSapId = 200,
dwUdpPort = 5150,
dwZero = 0;
int ret;
memset(&sci, 0, sizeof(sci));
SET_NETWARE_SVCID(&sci.lpServiceClassId, dwSapId);
sci.lpszServiceClassName = (LPSTR)"Widget Server Class";
sci.dwCount = 4;
sci.lpClassInfos = aNameSpaceClassInfo;
memset(aNameSpaceClassInfo, 0, sizeof(WSANSCLASSINFO) * 4);
aNameSpaceClassInfo[0].lpszName = SERVICE_TYPE_VALUE_CONN;
aNameSpaceClassInfo[0].dwNameSpace = NS_NTDS;
aNameSpaceClassInfo[0].dwValueType = REG_DWORD;
aNameSpaceClassInfo[0].dwValueSize = sizeof(DWORD);
aNameSpaceClassInfo[0].lpValue = &dwZero;
aNameSpaceClassInfo[1].lpszName = SERVICE_TYPE_VALUE_UDPPORT;
aNameSpaceClassInfo[1].dwNameSpace = NS_NTDS;
aNameSpaceClassInfo[1].dwValueType = REG_DWORD;
aNameSpaceClassInfo[1].dwValueSize = sizeof(DWORD);
aNameSpaceClassInfo[1].lpValue = &dwUdpPort;
aNameSpaceClassInfo[2].lpszName = SERVICE_TYPE_VALUE_CONN;
aNameSpaceClassInfo[2].dwNameSpace = NS_SAP;
aNameSpaceClassInfo[2].dwValueType = REG_DWORD;
aNameSpaceClassInfo[2].dwValueSize = sizeof(DWORD);
aNameSpaceClassInfo[2].lpValue = &dwZero;
aNameSpaceClassInfo[3].lpszName = SERVICE_TYPE_VALUE_SAPID;
aNameSpaceClassInfo[3].dwNameSpace = NS_SAP;
aNameSpaceClassInfo[3].dwValueType = REG_DWORD;
aNameSpaceClassInfo[3].dwValueSize = sizeof(DWORD);
aNameSpaceClassInfo[3].lpValue = &dwSapId;
WSAInstallServiceClass(&sci);
modified on Thursday, January 29, 2009 11:19 AM
|
|
|
|
|
In MSDN, it says:
A namespace provider is a locally-resident piece of software that knows how to map between the Winsock namespace SPI and some existing namespace (which could be implemented locally or be accessed through the network).
I'm not clear about some concepts:
1. Winsock namespace SPI (and what does SPI stand for here?)
2. some existing namespace
The concepts are too abstract to me, any sample?
Thanks very much.
|
|
|
|
|
followait wrote: and what does SPI stand for here?
Great question. What can you do? Oh I know, how about this[^]
|
|
|
|
|
hi guys,
i have coded a simple program that give the list of files in a directory. i use Visual C++ 2008 to code it. But when i copy and run the exe file from debug folder on other pc its showing " application failed to start because its side-by-side configuration is incorrect.Please see the application event log or use the command-line sxstrace.exe tool for more detail". what should i do ? i need to do this program to run portable in any windows base pc. kidly help me.
Thank you.
Regards ,
Thilek
|
|
|
|
|
Do you have any specific reason why you are "distributing" your DEBUG build? If no, try with a RELEASE build instead.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Hi,
Change the Microsoft foundation classes in the projet settings(projectmenu->settings->general tab)to Use MFC in a static library.
Then execute the appln again .Then copy the exe file and try to run in another pc.
|
|
|
|
|
where can i find the projectmenu... is it on the tool bar ?
|
|
|
|
|
Why is it so difficult to find project menu ???
Alternatively Press Alt + F7
|
|
|
|
|
i did as u said but now its showing error...
Embedding manifest...
mt.exe : general error c101008a: Failed to save the updated manifest to the file ".\Debug\testing.exe.embed.manifest". The parameter is incorrect.
kindly help me...
|
|
|
|
|
its ok ya.. its running now.. thanks a lot u been very helpful.. thanks a lot.... 
|
|
|
|
|
thanks for ur idea mate... its working fine now.. thanks a lot ya...
|
|
|
|
|
Hi, can u please help.
Its a small project and involves communication with a device. The data sent by the device is Written to .DAT file (WeightValue.dat).
Following is the code:
CStdioFile fil;
fil.Open("WeightValue.dat",CFile::modeReadWrite);
fil.WriteString(LPCTSTR(value));
fil.Close();
When I try running the exe in Release / Debug Configuration, I get a debug assertion saying :
"Debugging information for ADRTest.exe cannot be found or doess not match.Binary was not built with debug information."
ADRTest.exe has triggered a breakpoint and breaks to show.
void CStdioFile::WriteString(LPCTSTR lpsz)
{
ASSERT(lpsz != NULL);
breakpoint here-> ASSERT(m_pStream != NULL);
if (lpsz == NULL)
{
AfxThrowInvalidArgException();
}
if (_fputts(lpsz, m_pStream) == _TEOF)
AfxThrowFileException(CFileException::diskFull, _doserrno, m_strFileName);
}
Awaiting your kind reply.
Thanks and Regards.
Divya.
|
|
|
|
|
It seems you are trying to run your RELEASE build in debug mode. Could it be that the output directory for your DEBUG and RELEASE targets is the same directory and you previously built a release EXE and now you are trying to run it in DEBUG mode? Even if not, a simple "clean and rebuild" can't hurt...
Aside of that, my guess would be that fil.Open("WeightValue.dat",CFile::modeReadWrite); fails, i think if it does not find the file specified it won't create it for you, so it can't open it. Check the flags for open here[^], i guess you need CFile::modeCreate | CFile::modeNoTruncate | CFile::modeWrite | CFile::typeText, maybe with the hint of a seeking to the end of the file if you wish to append to it.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Try:
CStdioFile fil;
CFileException e;
if (fil.Open("WeightValue.dat", CFile::modeReadWrite, &e) != FALSE)
{
fil.WriteString((LPCTSTR) value);
fil.Close();
}What type of variable is value?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"The brick walls are there for a reason...to stop the people who don't want it badly enough." - Randy Pausch
|
|
|
|
|
Hi all,
i m using this.
1. declare it in header file.
protected:
CBrush m_brush;
2. now on OnInitDialg()
m_brush.CreateSolidBrush(RGB(245, 245, 245));
3.now on OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor)
return m_brush;
but here edit contol also colored with this color.
please tell me how can i change Back ground color of dialog box and back ground color of static control.
To accomplish great things, we must not only act, but also dream;
not only plan, but also believe.
|
|
|
|
|
Hi,
Create a class for the control, then return the brush in OnCtlColor()(in the new class).Just try it iam not sure about the result.
|
|
|
|
|
If you read here[^], you find WM_CTLCOLORDLG[^] and WM_CTLCOLORSTATIC[^], maybe try handling these messages instead of WM_CTLCOLOR, aside of that, the documentation also states this for WM_CTLCOLOR:
lParam
A handle to a child window (control).
This is the handle of the control asking for the color information, you could use that to filter out the controls you wish to change the background color.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Thanks,
please tell how can i color the background of formview.
To accomplish great things, we must not only act, but also dream;
not only plan, but also believe.
|
|
|
|
|
hi All
I m writing a directshow application in vc++ 2005. My problem is that I m trying to merge two or more videos clips but i can't get any help from anywhere please help me how do i this.
please help me
Thanks in advance
|
|
|
|
|
What do you mean by merge?
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
I'm new to C++.
I try to build the Simple application in Microsoft's detours project in VS08.
Detours is used to inject dlls into API processes or into applications. You can find it at:
http://research.microsoft.com/en-us/projects/detours/
I managed to build:
detoured.dll
detours.lib
Simple.dll (That's the hook)
setdll.exe (The program that injects the hook)
sleep5.exe (The exe that uses the hooked API)
When I try to run the hook:
setdll /d:simple.dll
I get the error message:
Error: simple.dll does not export function with ordinal #1.
It's because Simple.dll doesn't export anything.
Detoured.dll does export the function detoured.
detoured.h:
#ifdef DETOURED_EXPORTS
#define DETOURED_API __declspec(dllexport)
#else
#define DETOURED_API __declspec(dllimport)
#endif
HMODULE DETOURED_API WINAPI Detoured();
detoured.cpp:
#include <windows.h>
#include "detoured.h"
static HMODULE s_hDll;
HMODULE WINAPI Detoured()
{
return s_hDll;
}
BOOL WINAPI DllMain(HINSTANCE hinst, DWORD dwReason, LPVOID reserved)
{
(void)reserved;
if (dwReason == DLL_PROCESS_ATTACH) {
s_hDll = hinst;
DisableThreadLibraryCalls(hinst);
}
return TRUE;
}
</windows.h>
But simple.cpp is just this in the package:
#include <stdio.h>
#include <windows.h>
#include "detours.h"
static LONG dwSlept = 0;
static VOID (WINAPI * TrueSleep)(DWORD dwMilliseconds) = Sleep;
VOID WINAPI TimedSleep(DWORD dwMilliseconds)
{
DWORD dwBeg = GetTickCount();
TrueSleep(dwMilliseconds);
DWORD dwEnd = GetTickCount();
InterlockedExchangeAdd(&dwSlept, dwEnd - dwBeg);
}
BOOL WINAPI DllMain(HINSTANCE hinst, DWORD dwReason, LPVOID reserved)
{
LONG error;
(void)hinst;
(void)reserved;
if (dwReason == DLL_PROCESS_ATTACH) {
printf("simple.dll: Starting.\n");
fflush(stdout);
DetourRestoreAfterWith();
DetourTransactionBegin();
DetourUpdateThread(GetCurrentThread());
DetourAttach(&(PVOID&)TrueSleep, TimedSleep);
error = DetourTransactionCommit();
if (error == NO_ERROR) {
printf("simple.dll: Detoured Sleep().\n");
}
else {
printf("simple.dll: Error detouring Sleep(): %d\n", error);
}
}
else if (dwReason == DLL_PROCESS_DETACH) {
DetourTransactionBegin();
DetourUpdateThread(GetCurrentThread());
DetourDetach(&(PVOID&)TrueSleep, TimedSleep);
error = DetourTransactionCommit();
printf("simple.dll: Removed Sleep() (result=%d), slept %d ticks.\n",
error, dwSlept);
fflush(stdout);
}
return TRUE;
}
</windows.h></stdio.h>
So I tried to make it similar to detoured.dll:
simple.h:
#ifdef SIMPLE_EXPORTS
#define SIMPLE_API __declspec(dllexport)
#else
#define SIMPLE_API __declspec(dllimport)
#endif
HMODULE SIMPLE_API WINAPI Simple();
Simple.cpp:
#include <stdio.h>
#include <windows.h>
#include "..\detours\detours.h"
#define SIMPLE_EXPORTS
static LONG dwSlept = 0;
static VOID (WINAPI * TrueSleep)(DWORD dwMilliseconds) = Sleep;
static HMODULE s1_hDll;
HMODULE WINAPI Simple()
{
return s1_hDll;
}
VOID WINAPI TimedSleep(DWORD dwMilliseconds)
{
DWORD dwBeg = GetTickCount();
TrueSleep(dwMilliseconds);
DWORD dwEnd = GetTickCount();
InterlockedExchangeAdd(&dwSlept, dwEnd - dwBeg);
}
BOOL WINAPI DllMain(HINSTANCE hinst, DWORD dwReason, LPVOID reserved)
{
LONG error;
(void)reserved;
if (dwReason == DLL_PROCESS_ATTACH) {
s1_hDll = hinst;
printf("simple.dll: Starting.\n");
fflush(stdout);
DetourRestoreAfterWith();
DetourTransactionBegin();
DetourUpdateThread(GetCurrentThread());
DetourAttach(&(PVOID&)TrueSleep, TimedSleep);
error = DetourTransactionCommit();
if (error == NO_ERROR) {
printf("simple.dll: Detoured Sleep().\n");
}
else {
printf("simple.dll: Error detouring Sleep(): %d\n", error);
}
}
else if (dwReason == DLL_PROCESS_DETACH) {
DetourTransactionBegin();
DetourUpdateThread(GetCurrentThread());
DetourDetach(&(PVOID&)TrueSleep, TimedSleep);
error = DetourTransactionCommit();
printf("simple.dll: Removed Sleep() (result=%d), slept %d ticks.\n",
error, dwSlept);
fflush(stdout);
}
return TRUE;
}
</windows.h></stdio.h>
But Simple.dll still doesn't export anything, because SIMPLE_EXPORTS is undefined. How to build this project correctly?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
