|
Your mobile phone USB device should report as mass storage class, which has class 08, and subclass 06. At the same time the class protocol should be also supported.
|
|
|
|
|
I currently have 6 Windows Server 2003 machines and 2 Windows XP PCs running specific tasks.
2 of the 6 Server 2003 machines cannot be virtualised, but I see no reason why the others cannot.
The question is what are advantages and disadvantages of virtualisation and how would I go about specifying hardware?
Steve Jowett
-------------------------
Real programmers don't comment their code. If it was hard to write, it should be hard to read.
|
|
|
|
|
Well, it obviously would prevent you from wasting resources and energy. You might have to invest into higher-end hardware, though, especially if one or more of the servers have maxed their CPU loads. The main disadvantage: If that system fails, all VMs fail as well - you need redundant power supplies, networking, harddisk storage....
If you want to specify the hardware: see above. You need to provide CPU cycles for all VMs, as well as redundant hardware.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 50, {ff974cb0, 0, 80461e23, 0}
*** ERROR: Module load completed but symbols could not be loaded for Dbgv.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
*** WARNING: Unable to verify checksum for irp4exe.exe
*** ERROR: Module load completed but symbols could not be loaded for irp4exe.exe
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: kernel32!pNlsUserInfo ***
*** ***
*************************************************************************
Probably caused by : Dbgv.sys ( Dbgv+992 )
Followup: MachineOwner
---------
nt!RtlpBreakWithStatusInstruction:
80455558 cc int 3
kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ff974cb0, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 80461e23, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
------------------
READ_ADDRESS: ff974cb0 Nonpaged pool
FAULTING_IP:
nt!_output+434
80461e23 66833800 cmp word ptr [eax],0
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: irp4exe.exe
TRAP_FRAME: be1204d4 -- (.trap 0xffffffffbe1204d4)
ErrCode = 00000000
eax=ff974cb0 ebx=80064b53 ecx=ff974cb0 edx=7fffffff esi=7ffffffe edi=00000001
eip=80461e23 esp=be120548 ebp=be12079c iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
nt!_output+0x434:
80461e23 66833800 cmp word ptr [eax],0 ds:0023:ff974cb0=????
Resetting default scope
LAST_CONTROL_TRANSFER: from 8042a9eb to 80455558
STACK_TEXT:
be1200b8 8042a9eb 00000003 be120100 ff974cb0 nt!RtlpBreakWithStatusInstruction
be1200e8 8042afde 00000003 c03fe5d0 80064b7c nt!KiBugCheckDebugBreak+0x31
be120474 80449d19 00000001 ff974cb0 00000000 nt!KeBugCheckEx+0x390
be1204bc 80467cbf 00000000 ff974cb0 00000000 nt!MmAccessFault+0x757
be1204bc 80461e23 00000000 ff974cb0 00000000 nt!KiTrap0E+0xc3
be12079c 80461626 be1207b4 f41a69de be120b00 nt!_output+0x434
be1207d4 be0e9992 be1207ec f41a69d0 be120afc nt!vsprintf+0x2d
WARNING: Stack unwind information not available. Following frames may be wrong.
be120af0 f41a6acd f41a69d0 ff974cb0 ff974cb0 Dbgv+0x992
be120bb8 8041ddf1 814ef030 815bef68 815bef68 irp4!MyDeviceIoControl+0xdd [e:\mydriver\irp\4\sys\irp4.c @ 172]
be120bcc 804ae9bc 815befd8 00000000 815bef68 nt!IopfCallDriver+0x35
be120be0 804af826 814ef030 815bef68 812e76e8 nt!IopSynchronousServiceTail+0x60
be120cb8 804a73ae 000003d4 00000000 00000000 nt!IopXxxControlFile+0x5e4
be120cec be6580ce 000003d4 00000000 00000000 nt!NtDeviceIoControlFile+0x28
be120d34 80465024 000003d4 00000000 00000000 klif+0x100ce
be120d34 77f88403 000003d4 00000000 00000000 nt!KiSystemService+0xc4
0012feb8 77e6951b 000003d4 00000000 00000000 ntdll!ZwDeviceIoControlFile+0xb
0012ff1c 00401072 000003d4 00222400 00000000 KERNEL32!DeviceIoControl+0xf8
0012ffc0 77e889d5 00000006 00000008 7ffdf000 irp4exe+0x1072
0012fff0 00000000 00401181 00000000 000000c8 KERNEL32!BaseProcessStart+0x3d
STACK_COMMAND: kb
FOLLOWUP_IP:
Dbgv+992
be0e9992 83c40c add esp,0Ch
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: Dbgv+992
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Dbgv
IMAGE_NAME: Dbgv.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4436c4b6
FAILURE_BUCKET_ID: 0x50_Dbgv+992
BUCKET_ID: 0x50_Dbgv+992
Followup: MachineOwner
---------
|
|
|
|
|
Hi,
Have you eventually figured it out? I'm fighting a very similar problem and got stuck.
TIA,
-Mihai
|
|
|
|
|
i am running in my project and i need special person who can help me ..
i am planning to run my project with oracle10g and oracle tools.
now i need to know some people who are realy want to help me.
i know my project is not clear right now but i will explin it later.
.
.
.
.
but now i want to get code that let me stor data from passport reader to the database.....
this is my email to contact with me
ma_3001_ma@hotmail.com
thank you
|
|
|
|
|
And people wonder why I don't work for Customs anymore...
|
|
|
|
|
mansoor hajer wrote: i know my project is not clear right now but i will explin it later
I doubt that you will get an answer. You might, but I doubt it.
For me at least to make a response other than this one, you gonna have to explin it now, in full, in detail.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
I'm sorry ...
now i will explain my problem and i hope you help me...
i made my graduate project which is control the ports of country,
so it's apply on airports...
and i need the passport reader to input the details of the passengers
of their passport....
but i don't know how can i connect the passport reader device with
a PC and then with my project form.
i need at least to read the data from the traveler's passport by
the passport reader device to hyper terminal program which come with any
win-XP or to any text file....
i use (CM20xx) passport reader.
|
|
|
|
|
Your best bet for this is to contact the manufacturer of the CM20xx, via their website if they have one. Get the technical specs to discover what interfaces they have, together with details of any encryption / data encoding and schema they use.
It may turn out to be as simple as the data is read into a database, which you might be able to access.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Thank you mr- Henry Minute for your answer ..
but i searched about the web site but i failed..
if you have any information about any thing that help me to
connect the passports reader to the Hyper Terminal Or to any program
in windows i will be glad and i give you a small Kiss.
|
|
|
|
|
mansoor hajer wrote: windows i will be glad and i give you a small Kiss
Well, gee, thanks! But I think I'll pass on that. 
Before I gave my last reply I Googled for 'CM20xx' and got several hits, none of which could be specifically attributed to a Passport Reading device. One of them, which did mention 'reader' had both a USB and a serial interface. There are lots of articles on interfacing to both of these using C#, however, that's not a lot of use unless you can somehow confirm that your choice has either/both of these.
Two things occur to me.
1) Find the postal address of the manufacturer and write to them, explain your situation and ask what help, if any, they can give you.
2) And you may have to do this if 1) doesn't work. Select a different reader, that you can get some information on.
That's all I got, sorry.
Good luck with whatever you do.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
thank you very much mr henry minute.
i wil follow your advice..
![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif) 
|
|
|
|
|
i am trying to write an app for an hotel to help manage inventory and accounts by taking records of sales from the cash register i want to be able to read the sales data from a cash register through either a serial port or network card from a pc i.e my app,any ideas?
|
|
|
|
|
Hi,
solomonope wrote: any ideas?
Get the manual from the manufacturers of the cash register to find the protocol used and what data is output.
Hook a PC with a serial port monitor to the register and see what is received when the register is used.
|
|
|
|
|
Hello,
I saw a pc which use Vista, there was a toolbar on desktop.I want to make this toolbar
I want to make a toolbar, this toolbar must be on desktop everytime, like "start".
How should i do it?? ( with Win32 api + c)
Thanks,
|
|
|
|
|
u could u windows service in .net ,there is a project type in visual studio then set the form location property to the starting point u want.note that the windows service shld start an .exe containing the form.
if(me){
throw new Exception("hello there");
}
|
|
|
|
|
This is a hardware and Devices forum. NOT a software forum!
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Dear All
Maximum How many NIC card we can connect to the system
Plz help me..
Regards
Sunny
|
|
|
|
|
How many expansion slots are there in the system??
|
|
|
|
|
Hi..
Expansion slot is not fix to system
Regards
Sunny
|
|
|
|
|
Ummm...let's try this again. The maximum number of NIC cards you can have in the machine is limited by the number of expansion slots in the machine. That's all.
I currently have 4 in the machine I'm on right now...
|
|
|
|
|
I am trying to implement a software layer to handle Decklink card IO.
According to SDK provided with the card, all the decklink filters implements IDecklinkIOControl Interface. My query is that can we able to query that interface without adding any of the Decklink filters in the graph
|
|
|
|
|
If you have the SDK, you should also have a help-file or contact information for support. Even though most people on CP are willing to help if they can, your chance of finding someone in the know are pretty slim around here.
That being said, you are referring to an interface, which is just a posh way for the filters to state "this is how you can talk to me". There is no useable implementation behind your IDecklinkIOControl interface. You either need to write your own or use one of those provided by the supplier. Which means that "NO" probably is the answer you'll get from Decklink.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
¿Cuál es más eficiente en el uso de los megahertz: El AMD K9 o el lntel Core 2?
Wich one is more efficient in the megahertz use: the AMD K9 or the lntel Core 2?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
