|
He's stuck at starting. I'm convinced these people don't know how to open Visual Studio or, if they get that far, start a new project.
|
|
|
|
|
Hi if anyone could help I would appreciate it. I have a database with a
Movies Table, Casting Table, and Actor Table.
Movie Table has MovieID
Casting Table has MovieID , and ActorID
Actor Table has ActorID
This code deletes a row from the movies table(using a datagrid in vb.net), I need all the rows in the Casting table with the same MovieID to also be deleted.
Any help would be appreciated!!
Dim result As String
Dim i As Integer
i = MovieDataGridView.CurrentRow.Index
result = MsgBox("Are you sure you want to delete this movie?", MsgBoxStyle.OkCancel)
If result = vbOK Then
If MovieDataGridView.Rows.Count = 1 Then
MsgBox("You must leave one movie in database!!")
Else
Me.MovieDataGridView.Rows.Remove(Me.MovieDataGridV iew.SelectedRows(0))
End If
Else
End If
Me.Validate()
Me.MovieBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MovieProjectDa taSet)
|
|
|
|
|
I will leave answering your question to those with more knowledge than I.
However, If after waiting a few hours (remember this is the weekend) you have not received an answer, I would suggest this would be better asked in the General Database forum.
Also, it seems strange to insist that there be at least one movie in the table. Care to share the reason for this?
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Yeah it is strange to have to keep one movie in the table. It is because I have another problem that I will have to deal with later. This program is for a school project
See here when I add a new movie it counts the rows -1 and if there are no rows I get a no nulls allowed in movieID error. So for now I took that problem away by cheating with the msgbox!!
Dim rowcount As Integer = Form1.MovieDataGridView.Rows.Count
'Get the value of the last movie ID
x = Form1.MovieDataGridView.Item(0, rowcount - 1).Value
'Add 1 to the value of the last movie ID
x += 1
'Add new row to the datagridview's datasource
Form1.MovieDataGridView.DataSource.addnew()
'Set the value of column 1 on the new row
Form1.MovieDataGridView.Rows(rowcount).Cells(0).Value = x
'Set the value of column 2 on the new row to the data in the Title textbox
Form1.MovieDataGridView.Rows(rowcount).Cells(1).Value = txtTitle.Text
|
|
|
|
|
Hmm.. Small Reaction. As i understand, you are actually handeling your "MovieID" in code. You should let your database handle this and just request what id it gave to the last record you inserted in the database ( syntax might depend on the database you are uding)
About deleting the cast records related to the movie: you actually do the right thing  I don't see any other way then to simple delete all records in that table related to the movie you have deleted.
Do Or Don't, there is no "try catch ex as exception end try"
|
|
|
|
|
I got it to work like this, I added a new query called GetDatabyDcast to my casting datatable that says
DELETE FROM Casting WHERE MovieID =@MovieID
then I added that into the delete button. This probably isnt the best way to do it but it got the job done. If you know a better way, then let me know please. Thanks
Dim result As String
Dim i As Integer
i = MovieDataGridView.CurrentRow.Index
result = MsgBox("Are you sure you want to delete this movie?", MsgBoxStyle.OkCancel)
If result = vbOK Then
If MovieDataGridView.Rows.Count = 1 Then
MsgBox("You must leave one movie in database!!")
Else
Dim s As Integer
s = Me.MovieDataGridView.CurrentRow.Index
Dim a As String = Me.MovieDataGridView.Item(0, s).Value.ToString
a = a
Dim ta As New MovieProjectDataSetTableAdapters.CastingTableAdapter
Dim tbl As MovieProjectDataSet.CastingDataTable
tbl = ta.GetDataByDcast(a)
Form3.CastingTableAdapter.Fill(Me.MovieProjectDataSet.Casting)
Form3.Validate()
Form3.CastingDataGridView.EndEdit()
Form3.TableAdapterManager.UpdateAll(Me.MovieProjectDataSet)
Me.MovieDataGridView.Rows.Remove(Me.MovieDataGridView.SelectedRows(0))
End If
|
|
|
|
|
The code to create thread at the service start event.
Dim SerialPort1 As New SerialPort
Dim returnstr As String = ""
Dim thread1 As New Thread(AddressOf RecieveSerialData)
If thread1.IsAlive = False Then
thread1.Start()
thread1.Priority = ThreadPriority.Highest
End If
If thread1.IsBackground = False Then 'I am getting an exception in this statement stating the thread is dead.
thread1.IsBackground = True
End If
Public Sub RecieveSerialData()
Try
Using SerialPort1 As IO.Ports.SerialPort= My.Computer.Ports.OpenSerialPort(b)
MessageBox.Show("The " & b & " port is now opened.")
Do
Dim incomming As String = SerialPort1.ReadLine(b)
If incomming Then
MessageBox.Show(Now.ToString)
End If
Loop
End Using
Catch ex As Exception
MessageBox.Show(ex.ToString, "Error",MessageBoxButtons.OK,
MessageBoxIcon.Error)
End Try
End Sub
The code stop the service and thread :
If thread1.IsAlive = True Then
thread1.Abort()
End If
If SerialPort1.IsOpen = True Then
SerialPort1.Close()
Else
MessageBox.Show("The service is already stoped.", "Serial Service", MessageBoxButtons.OK, MessageBoxIcon.Information)
End If
End Sub
Here I am getting various exception like
(1) The process cannot access COM3 port because it is being used by another process. This exception occurs when the first time service is activated. In the first attempt the stop service procedure executes properly.
(2) After the first execution the IsBackground statement gives an exception stating the thread id dead.
|
|
|
|
|
Normally you shouldn't set IsBackground after starting it. The thread may well run and exit before it even gets to that place (it's allowed to do that, even though it usually won't happen)
But the rest is strange, I hope someone else can help you better.
|
|
|
|
|
Hallo @ all,
my *.xml look like this
<stoerung>
<konfig>
<pfad>
</pfad>
<texte>
<txt />
</texte>
</konfig>
<pbeschr>
<prob>Server-Störung(Sprache)</prob>
</pbeschr>
<prozesse>
<prozess nr="S">
<prozessbeteiligte>
<bez>OPS1</bez>
<bez>TEC2</bez>
<bez>AVAYA</bez>
<bez>Geschäftsleitung</bez>
<bez>RITS-Leitung</bez>
<bez>VOS</bez>
<bez>Identity</bez>
<bez>Fachgruppe(n)</bez>
<bez>UHD- SchwarzesBrett</bez>
<bez>RITS</bez>
</prozessbeteiligte>
</prozess>
...
<prozess nr="xy">
<prozessbeteiligte>
<bez>OPS5</bez>
<bez>TEC1</bez>
<bez>AVAYA-1</bez>
I have more <prozess nr="x">
How can i get the complete "prozessbeteiligte" for any attribute with vb.net (Frame3.5) 
Can anywhone help me? 
greet
Woerny
|
|
|
|
|
Take a look at System.XML. You can open an existing XML document with the following code:
Dim doc as new XML.XMLdocument
doc.Load("Filename")
Now I'd advise you to make one main node that contains all your <Prozess nr=""> nodes, so you can iterate through that collection. That means you will have to change the layout of your XMLdocument.
When you've done that, just call a For Each loop like this:
For Each prozess as Xml.XmlNode in mainnode.Childnodes
...
Next
Looks a lot like TreeView doens't it?
Cheers,
Zaegra
Motivation is the key to software development.
|
|
|
|
|
hi to all,
I am creating n running an process using the code
dim p as new process
p.startinfo==path
p.start()
p.waitforexit()
my problem is when i make the path as a link. then it gives a error msg in p.waitforwxit() line saying "no procedss is associated with the process"....with noramal path it works fine...only when i give a link (say, c:\aa\calculator.lnk) it shows the error
please help me out
thanks in advance
-----------------------------
I am a beginner
|
|
|
|
|
hi,
the first or only parameter for Process.Start should be a string pointing to:
- either an executable file (.EXE)
- or a document for which a file association exists (e.g. a .DOC assuming MS Office has been installed)
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
thanks for the answer...
but it works with even a shortcut...n thats my requirement too
How do i achieve that?
-----------------------------
I am a beginner
|
|
|
|
|
It seems I'm not thinking so clearly today, so you want to start the application linked to a shortcut?
Motivation is the key to software development.
|
|
|
|
|
Your code is not giving any time for the process to start. After you call Start, you have to wait for the process to start before you call WaitForExit. Try calling WaitForInputIdle before WaitForExit.
|
|
|
|
|
hello everyone
i am having 2 textboxes now i display '0' values in both textboxes at design time
at run time i change the values of it like textbox1 has value 3 now i want that textbox2 should start from 1 when i enter any numeric value in textbox 1
for this example if i enter 3 in textbox1 then textbox2 should be 1 and inrement likewise.
for that my code is:
If Val(Me.txtbox1.text) > Val(Me.txtbox2.Text) > 0 Then
Me.txtbox2.Text = Val(Me.txtbox2.Text) + 1
Else
Me.txtbox2.Text = Val(Me.txtbox2.Text) - 1
End If
but this is not working
please suggest some another code
thank you all.
|
|
|
|
|
It seems like a pretty straight-forward question, but still I don't understand what needs to be done. Please explain it again so I might understand what you're trying to do
Cheers,
Zaegra
Motivation is the key to software development.
|
|
|
|
|
suppose there are two textboxes and button1 in form
textbox1- for no of documents
textbox2-is counter
now when i type '3' in textbox1
then this count which is another textbox2 should auto generate from '1'
now when i click on button1 then this count should have value '2' and all textboxes becomes clear
i.e there should be 2 in textbox2
now when i again click on button1 then this count which is textbox2 should have value '3'and all textboxes become clear..
please suggest some code for it
hope you got me...
please help...
|
|
|
|
|
suppose there are two textboxes and button1 in form
textbox1- for no of documents
textbox2-is counter
now when i type '3' in textbox1
then this count which is another textbox2 should auto generate from '1'
now when i click on button1 then this count should have value '2' and all textboxes becomes clear
i.e there should be 2 in textbox2
now when i again click on button1 then this count which is textbox2 should have value '3'and all textboxes become clear..
please suggest some code for it
hope you got me...
please help.
|
|
|
|
|
So you mean each time the button is clicked the value of TextBox2 needs to be increased by one?
Here you go:
(NOTE: Make sure the user only inserts a numeric value in TextBox1, if not, an exception will appear. Also, in the Designer set the Text Property of TextBox2 to "1")
Private Sub Button1_Click(..) Handles Button1.Click
Dim dec as Decimal = TextBox2.Text
dec+=1
TextBox2.Text = dec
End Sub
Motivation is the key to software development.
modified on Saturday, May 9, 2009 10:43 AM
|
|
|
|
|
any one please explain the following VB code
If Not COMMON_MainForm.rsdbinfo.EOF Then
COMMON_MainForm.rsdbinfo.Edit
COMMON_MainForm.rsdbinfo!Operationtype = "MREAM"
COMMON_MainForm.rsdbinfo.Update
COMMON_MainForm.sdboperation = "MREAM"
End If
Thanks
Willington
|
|
|
|
|
There's no way to know for sure with the tiny snippet you posted, but it looks like it's modifying records in a recordset.
|
|
|
|
|
I am doing a 200 marks project. However I have encountered some problems.
(1) I am using LINQ command to delete an entry from database in my application. After the code block is executed that particular entry is deleted from database however the binding navigator control or my application doesnot acknolodge the change. I tried to acknolodge the change by refreshing and/or updating the form and/or control.
(2) I also want to how to count total number of entries present in the database and the index of the current selected entry dynamically. After deleting or adding an entry the change is not acknolodged.
(3) I am doing a hardware project where I use a service which when activated will get my COM port(serial port) in passive open state. I am achieving this by creating a infinite for loop. However by doing this whenever my I start the service I am not able to use rest of application. I plan to overcome this problem by using threading. I plan to use one thread for the service but don't know if I should use thread for other elements. I only have one service in my application. I have no idea with any aspect of threading. Please guide me in this issue. I have a doubt if the signal arrives when the thread is not in focus then would the signal be lost.
Please guide me for these issue.
|
|
|
|
|
First, without seeing any code, it's very difficult to say what you did wrong.
But, I'll take some guesses.
Ishaan Karnik wrote: (1) I am using LINQ command to delete an entry from database in my application. After the code block is executed that particular entry is deleted from database however the binding navigator control or my application doesnot acknolodge the change. I tried to acknolodge the change by refreshing and/or updating the form and/or control.
This is probably because you bypassed the dataset/datatable the controls are bound to and made the changes directly to the database. You'd have to refresh the dataset/datatable, or whatever collection you used so it retrieves the new data from the database.
Ishaan Karnik wrote: (2) I also want to how to count total number of entries present in the database and the index of the current selected entry dynamically. After deleting or adding an entry the change is not acknolodged.
Again, you bypassed the local collection of records when you made the update.
You can get the current number of records from the DataSet/DataTable or collection that you used to hold the data. There are Count and Length properties you could use to determine this.
The currently selected record would be available from the BindingNavigator you have setup.
Ishaan Karnik wrote: (3) I am doing a hardware project where I use a service which when activated will get my COM port(serial port) in passive open state. I am achieving this by creating a infinite for loop. However by doing this whenever my I start the service I am not able to use rest of application.
Your description doesn't make sense. Are you saying that you're running your application as a service?? This is a REALLY bad idea. If not, then did you launch your actual work under a seperate thread in the services OnStart event? (This is where some code small code snippets would help a lot!)
Ishaan Karnik wrote: I plan to use one thread for the service but don't know if I should use thread for other elements.
What other elements?? What is this service supposed to do??
Ishaan Karnik wrote: I have a doubt if the signal arrives when the thread is not in focus then would the signal be lost.
COM port communucation is buffered, so it's unlikely that you'll lose anything.
|
|
|
|
|
You, sir, get a 5 just for attempting to sort that out. 
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
Individuality is fine, as long as we do it together - F. Burns
Help humanity, join the CodeProject grid computing team here
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
