|
My answer was not intended to be hurtful; if you took it that way then I apologise. I didn't realise that posting the name of a class would be offensive. However, you received the answer to the precise question you asked, which was (in my eyes): how do I save a .bat file to a given location? Anyway, to the point at hand:
Rajdeep.NET wrote:
I know that I have to use the StreamWriter method and create a text file, where I'll enter the required execution parametres and then convert it to .bat using the File.Move() method
Just to point out, the path of the file you pass to the StreamWriter constructor doesn't have have to be a text file. You could create "FilePath.bat" in situ, which would eliminate the need for File.Move
This also goes a long way towards answering your full question. If you have the folder path from a DirectoryInfo instantiation, then passing this path to the StreamWriter(string) constructor will create the file in the given location. If you want the parent directory, then Path.GetDirectoryName can be used
Incidentally, the phrase "location where the folder is saved" isn't strictly accurate. For the sake of learning, you could have typed "the folder's parent directory"
|
|
|
|
|
Thank you, that was useful and eyeopening. 
|
|
|
|
|
What's your problem?
I try to be helpful, and what do I get for that? You call it useless and hurtful. I can understand if you don't find the advice very helpful if it's not exactly what you are looking for, but it's certainly not useless. If you find it hurtful, then it's certainly not my fault, and something that you have to work on yourself. If you can't even read well meaning advice without being hurt, you should definitely not be asking questions in a forum, but rather seek professional help.
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
Haven't you noticed a pattern yet? He writes these sob story posts after he receives answers he doesn't like! This is the second time. When does it get old? He posts absolute beginner-level posts, gets told to learn before he posts a few times, then he writes a sob story on how he's just trying to learn and English isn't his first language etc etc. All to start over the cycle of hand-holding for another 10 posts before he throws out another thread like the OP.
|
|
|
|
|
Maybe the problem is that there is no documentation on MSDN for Rajdeep.NET, I certainly haven't seen any.
My failometer has shot off the end of the scale!
I seem to have misplaced my ban button.. no wait... found it!
|
|
|
|
|
Sorry... From now on, I'll try to help myself out, rather wandering around the forum. Because, I dont want that others be harrased just for my stupid posts. I really apologize....
|
|
|
|
|
Answer the question I asked before with a justifiable answer (that doesn't include reasons why a 'malicious' app in .net could be unsucessful) an I'll help you all I can, whenever I can, just like everyone else on CodeProject.
Until then, I'm not prepared to help you any further I'm afraid as the things you've been asking are suspicious - even more so when combined.
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
Why are you using VB6? Do you hate yourself? (Christian Graus)
|
|
|
|
|
There are plenty of software which lock your folders, some are free, other costs a lot of money. Why you’ll waste time and money when you could do it with your notepad.
* Consider you want to lock a folder named PICS in your D:\, whose path is D:\PICS
* Now open the Notepad and type the following
ren pics pics.{21EC2020-3AEA-1069-A2DD-08002B30309D}
* Where pics is your folder name. Save the text file as loc.bat in the same drive.
* Open another new notepad text file and type the following
ren pics.{21EC2020-3AEA-1069-A2DD-08002B30309D} pics
* Save the text file as key.bat in the same drive.
Usage:
* To lock the pics folder, simply click the loc.bat and it will transform into control panel icon which is inaccessible.
* To unlock the folder click the key.bat file. Thus the folder will be unlocked and the contents are accessible.
Thats is what I want to do using C#.NET and nothing malicious in it, I guess. I swear I am upto no malicious thing. I cant make things to be understand properly because I am poor in english and that turns to be malicious, I dont know why!?
Rajdeep.NET 
|
|
|
|
|
Rajdeep.NET wrote: it will transform into control panel icon which is inaccessible
It hasn't really locked it. It has just made the file unusable in Window Explorer - You can still access the file via other routes.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
Hi Colin,
Can you suggest me any such route via which I can access the folder? I thought that it was blocked while it transformed into the control panel icon and if tried to access it, it would navigate to the Control panel.
|
|
|
|
|
That only fools Explorer. It doesn't do anything to stop someone from using their own version of Explorer, and better yet, doesn't stop anyone from using the CMD prompt to get into the folder and renaming it back to normal.
Again, you're lack of understanding of Windows, Windows Security and NTFS is glaringly obvious.
modified on Wednesday, May 27, 2009 7:35 AM
|
|
|
|
|
Normally I don't offer advice to people, but I think you need some help with your people skills here. Over a period of time, you've managed to arouse the suspicions of the regulars in the forum, and you've posted questions that show a lack of understanding about .NET, hence the reason that you have been advised to purchase books on C#.
You may want to stop using this identity, create a new user and use that to post in future. Before you do this though, stop and think about why people have been talking like this to you. These guys are good guys, and they give a lot of advice in the forums. It may be time for you to face the fact that the problem isn't them, but you. Yes, English isn't your first language but it's the same for a lot of the others who post here, many of whom successfully get answers to their problems.
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
|
Thanks for the advice,
PS: Advice is the only thing that can be given to anyone free of cost!
|
|
|
|
|
Rajdeep.NET wrote: PS: Advice is the only thing that can be given to anyone free of cost!
Apparently, advice is not the only thing that is given free of cost here. As a matter of fact, we give professional guidance, suggestions, source code, etc,. and that's FREE OF COST. Not to mention the articles. You just need to take your head out that dark hole to see it. You also need to relaise that you have made yourself the butt of a joke here and you cannot blame anyone else for that.
And the advice you were talking about, came from a man whose development experience is more than my age. If I were you, I would have taken his advice very seriously instead of mocking him or posting meaningless stuff any further.
With millions of members and literally hundreds of queries solved across several boards each and every day here, if *you* have a problem, then *you* need an attitude adjustment, not anyone else.
It is a crappy thing, but it's life -^ Carlo Pallini
|
|
|
|
|
In the reply I gave to the post that you refer to, I gave you a phrase to google for. The first page of the results for that search all showed how to achieve what you were trying to do.
Please explain to me how that is either useless or hurtful.
You are a spoiled, lazy deceitful little brat, aren't you?
Just in case you were wondering, that last bit was meant to be hurtful.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Ola uno como yo person,
Gracias por las todas de su dame^. Que estoy las todas que yo has darte. Si, por que soy esta^ muy perozoso amigo de usted. Gracias para las todos que usted tenga bonitos.
Troy
|
|
|
|
|
 Ola uno como yo person,
Gracias por las todas de su dame^. Que estoy las todas que yo has darte. Si, por que soy esta^ muy perozoso amigo de usted. Gracias para las todos que usted tenga bonitos.
Troy     
|
|
|
|
|
Is that a solution???!!! If yes, then please translate..... Is it in french, german, russian or CheckoSlovakian? 
|
|
|
|
|
I'd seriously think about taking Pete's advice, your list includes some of the most helpful and knowledgable people on the forum. Oh and the most persistent, I gave up on you weeks ago. You need to step back, evaluate your position and make some adjustments to your attitude, it stinks.
I think you will find a great lack of sympathy on this site from here on!
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Sorry! 
|
|
|
|
|
Rajdeep,
Why do you think you receive sugestions that you should "learn to google", "learn C#", "Go read a book", etc.?
Could it be:
That you continually ask basic questions?
That you show no knowledge of the subjects?
That you show no signs of learning from previous answers?
That you don't seem to think about what you are doing, at all?
I do not care if you are sixteen or sixty. It does not matter how good your english is. Many poeple here have much worse english than you, but they get help. Sometimes it means asking them to rephrase the question, but not always.
Look at the questions that get answers: what do they have, that yours don't? Effort. Signs that the askee is trying to learn, rather than sitting there expecting to be spoon fed.
And you are suprised and hurt when people don't give you what you want!
I will add some advice to my previous sugestions:
Grow up. The world is a big, unfriendly place. If you annoy people, they will not help you.
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Hi OriginalGriff,
I already apologized and I promise not to ask any basic questions from now on. And I really respect you people. I am just 5 to 6 months experienced in .NET, whereas the other guys replying to my queries, including you, are like Grand Masters to me. Yeah I dont know why I go crazy when I dont get what I want. Thats my attitude and I need to change it. The best of all this is that, I am lucky enough to get suggestions and advices from these many people out here. But maybe, I failed to understand those suggetions.
Goodbye forever,
Rajdeep.NET 
|
|
|
|
|
I develope an application that use a Web service.
On a PC the application running without problem, the customer decide to move the application on a thin client PC, my application cannot access to the web service.
Can help me?
Best Regard.
Diego Abramo
|
|
|
|
|
Without any exception or error information at all, my best guesses are as follows:
1. is the computer on
2. does it have the .net framework
3. does it have access to the internet
|
|
|
|
|
EliottA wrote: is the computer on
ahhh... so that's where I've been going wrong
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
Why are you using VB6? Do you hate yourself? (Christian Graus)
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
