|
Chris Hansson wrote:
Has ANYONE run into this irritating problem? And if so, has anyone a solution. I am rather close to doing a fresh install of Windows 2000 Professional, but then I would have thrown away the $200 I paid for XP Professional, and that irks me.
It is not just WXP, I use WXP and ASP.NET works just fine.
What does happen though (and it happens on W2K as well) is that the file associations in IIS for ASP.NET disapear. I have not found the cause, but it has happened to me once before.
To check go into IIS and then: Right Click the Default Web, select Properties. Then click the Home Directory tab and click the Configuration button. Now in the list displayed in front of you look for the ASPX file. If it is not there or the Executable Path does not point to aspnet_isapi.dll then you need to run the following command which re-associates ASP.NET files in IIS.
C:\WINNT\Microsoft.NET\Framework\v1.0.3705\aspnet_regiis.exe -i
Obviously replace WINNT with whatever your Windows path is.
Hope that helps 
Paul Watson
Bluegrass
Cape Town, South Africa
Ray Cassick wrote:
Well I am not female, not gay and I am not Paul Watson
|
|
|
|
|
hi,
my os is windows 95.
when it starts it says "cannot find system.ini"
you need to run windows setup again to install the file
press any key to continue"
when i press the key
" it says it's now safe to turn off your computer"
please give the solution
|
|
|
|
|
Besides saying that you are screwed (probably are in the long run) you can try this...
1 - Boot to dos
2 - Search for any files that have a 'system" in thier name. You ar elooking fo ranything that coul dbe a backup copy (due to a recent install of something or file edit using a good utility - like systedit - from a recent date). Pay attention to file extensions like '.bak' '.syd - file was backed up by sysedit'.
3 - Copy this file back to system.ini (IE: copy system.syd system.ini)
4 - Try to restart into windows.
This MIGHT work, but I highly recoment that you determine why you lost the file in the first place. This sounds either like someone was messing with you, or you, or you did something carless, or you had a virus. I had seen a virus in the past that places a 'del c:\windows\*.ini' in the autoexec.bat file so each time you boot up your ini files get deleted.
|
|
|
|
|
1. Format the PC
2. Reinstall a good (not from microsoft) OS
3. Enjoy
|
|
|
|
|
Please excuse my jumping in, but what type of OS would you advise? I've been trying to "replace" MS OS's for over 3+ years... and I'm still desperately seeking a system that does not have to be rebuilt simply to boot or properly shut down! My story is too long but I'm with you... IE: W95, 98, 98SE, ME and now XP! Even my ancient Mac 512SE has more up time than any of the previous... I keep it around just to retype and send snail mail when my other (7) MS boxes fail... at least I know it will still power up, print and power down without having to do some type of system file maintenance... I have 8 boxes (none networked) and on any given day, I can't guarantee a flawless session of composing and printing a document for my kid's school assignments... the answer to "where do you want to go today" usually means "crazy" for me...
Anyone care to hear the whole story? I'm new to CP, and looking for serious low level help... Is there a forum for articles like "digital dancing with the devil"? I've dedicated myself to learning C, C++, pearl, Pascal, basic, and/or even (God forbid) assembly, simply to understand and fix the basic errors with (IBM compatible) power on, os boot, application Open, Save, Print and Close... and most importantly "safe" shutdown and power off! I shouldn't have to be a rocket scientist... For God sakes, I'm a DRAM fab engineer whose only real goal in life was to publish a music and video magazine (in color, one flaw of the 512 Mac SE)! 15 years later I’m still trying, and now I'd like to do it over the web... I never thought it would require the study and practical use of a bookshelf full of programming manuals…
Maybe this should have been an article, and maybe this is not the right place to look for collaboration and help on my “PC” issues and website building desires… If not I apologize for my comments (and adding my $.02 worth) in agreement about MS… But I also want to thank CP for making problem code information and advise from professionals like you to the rest of us general public type persons… Nuff said… again, what OS do you suggest?
My only chance in life is to develop an operating system compatible with the memory and BIOS of loved ones that have died before me… aps
|
|
|
|
|
Hi,
I have Windows 2000 Advanced server. The IRQ conflict page showed the following. I think, this is the reason why my PC hangs with IRQ message.
Anyone has a suggestion for me to get rid of this problem?? Please help
System Information report written at: 11/06/2002 10:18:36 AM
[Conflicts/Sharing]
Resource Device
IRQ 9 Microsoft ACPI-Compliant System
IRQ 9 Volcano SoftK56 Data Fax Voice Speakerphone CARP
IRQ 9 Intel(R) 82801BA/BAM USB Universal Host Controller - 2442
IRQ 9 Intel(R) 82801BA/BAM SMBus Controller - 2443 (Intel(R) SMBus Driver)
IRQ 9 Intel(R) 82801BA/BAM USB Universal Host Controller - 2444
IRQ 9 SoundMAX Integrated Digital Audio
|
|
|
|
|
What is the actual message you're seeing? IRQ9 is commonly shared by PCI devices by design, and it's also shared with IRQ2 to cascade two eight-input IRQ controler circuits. It looks like all but the modem are integrated parts of the motherboard, so they are presumably tested and known to work properly even though they share an interrupt line. If you're reasonably certain that this otherwise normal-looking situation is causing a problem, try moving the modem to another slot. That can make a difference in which resources are assigned to the device.
"When in danger, fear, or doubt, run in circles, scream and shout!" - Lorelei and Lapis Lazuli Long
|
|
|
|
|
I indirectly fixed (not a solution for the problem) the problem. I dissabled the Norton Internet security that was installed with my server. Now , the PC doesnt hang. Just for the heck of it, I enabled the norton stuff... the PC hanged promptly in 10 minutes.....
The actual error message was.... DRIVER_IRQ_NOT_LESS_OR_EQUAL....
Thanks for ur advice...
|
|
|
|
|
That is not a problem at all, PCI devices can share IRQs.
SPS wrote:
my PC hangs with IRQ message.
Do you mean a BSOD with an IRQL_NOT_LESS_OR_EQUAL error? That has nothing to do with hardware IRQs, it's usually a buggy driver. The first thing to try is updating the drivers for your hardware.
--Mike--
"alyson hannigan is so cute it's crazy" -- Googlism
Just released - 1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
U r right about the error message. I didnt upgrade my driver... but did something else to fix the problem.
I disabled my NOrton Internet Security Edition... oops... the PC doesnt hang. I confirmed this by enabling the Norton Internet Security and... PC hanged.....
Thanks for ur advice?? Is norton handling the IRQ for anyreason.... and why is it hanging my PC????
|
|
|
|
|
I am trying to replace winmm.dll on W2K. It is in use even in safe mode. Any suggestions?
Thanks
|
|
|
|
|
Yes: do not replace it. It's a system file and Windows 2k System File Protection won't let you do it.
lazy isn't my middle name.. its my first.. people just keep calling me Mel cause that's what they put on my drivers license. - Mel Feik
|
|
|
|
|
It needs to be replaced becasue it is corrupted and is causing problems and windows file protection errors keep comin up. Even W2K is having trouble replacing it. Would directx or SP3 replace this file?
|
|
|
|
|
Try SP3, or re-installing your current service pack.
If that doesn't work, try running "SFC /scannow".
If that still doesn't work, the version in the dllcache (C:\WinNT\System32\dllcache\) is corrupt. You should be able to replace that version with the correct file, and then run "SFC /scannow" to replace the version in the system directory. Only use this as a last resort - you can really bugger your machine up by doing this!
|
|
|
|
|
Couldn't use your Windows 2000 install disk and boot the repair console and do it from there?
Why waste time learning when ignorance in instantaneous
-Hobbes
|
|
|
|
|
how to create domain on a simple network of two computers where xp professional is installed ?
|
|
|
|
|
You need at least a Win2k server to create a domain, otherwise just put the computers in the same workgroup.
|
|
|
|
|
Could someone walk me through setting up an alias on 2000 server? I feel like an idiot not to be able to set this up correctly. Thanks.
Darroll
|
|
|
|
|
Are you talking about in DNS (CNAME) ?
|
|
|
|
|
Yes, I am trying to set up dwforecasting.swingtimers.com. Thanks.
|
|
|
|
|
From Windows Help:
To add an alias (CNAME) resource record to a zone
Open DNS.
In the console tree, click the applicable forward lookup zone.
DNS
applicable DNS server
Forward Lookup Zones
applicable zone
On the Action menu, click New Alias.
In the Alias name text box, type the alias name.
In the Fully qualified name for target host text box, type the fully qualified domain name of the DNS host computer for which this alias is to be used.
As an option, you can click Browse to search the DNS namespace for hosts in this domain that have host (A) records already defined.
Click OK to add the new record to the zone.
Note:
To open DNS, click Start, point to Programs, point to Administrative Tools, and then click DNS
Not much help, is it? A CNAME record in DNS creates an alias for the host other than the base name contained in an A record. If this isn't helpful, perhaps a bit more detailed information about what you're trying to accomplish would be in order...
"When in danger, fear, or doubt, run in circles, scream and shout!" - Lorelei and Lapis Lazuli Long
|
|
|
|
|
ok I can now send mail from my new exchange 5.5 server but I cannot receive email. I am guessing that I need to have someone send me my mail, set it up like we have to set up the DNS servers. I am trying to do this without reading the documentation as I find it bloated and it takes too long. Is there an easy way to do this, or do I have to bug the guys that set up my DNS? Thanks in advance.
Darroll
|
|
|
|
|
Hi!
I have a stand-alone home PC running Windows 2000 Professional. I've installed IIS service but it can't start.
I got the next message in Event log:
The World Wide Web Publishing Service service terminated with the following error:
The authentication service is unknown.
The same error is appeared when I try to start FTP or SMTP service. What's wrong? Please, help me to start IIS service on my home PC!
Yours sincerely,
Alex Bash
|
|
|
|
|
Mhhh...Hard to tell you, i need to it.Well, uninstall IIS, then install IIS if this not help you, maybe you bad configured IIS.For more information look at http://www.iisanswers.com/Top10FAQ/t10-installiis.htm 
Zhymantas Vechorskis
|
|
|
|
|
we have 2 computer network.we made 2 new user on 2 computer with same
name and passwords on both computers.we first kill the simple file
sharing and uncheck the "use simple file sharing" in window explorer.
we succeeded to get right to access the network computer service on
one computer.but other computer was not showing the services of other computer.
we made some changes and then try to access the service.
in doing so break our network connection and now network path is not establishing.please give the bettter way to solve our problem
how to establish network path
how to access the right to accees the network services
and how to make a domain on 2 computers
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
