|
My companies internet interviewing system has been receiving some unusual complaints in the past couple of days. Some users are reporting that they are getting an error message like this:
569 No Data
This Web page could not be opened with the specified browser request. Please try again later.
I have not been able to find any information on this message so I am at a total loss as to what the problem is.
I suspect our router is the problem but I cannot verify it.
Does anyone out there have any knowledge of this error, what it means, what causes it, how to fix it?
Thanks,
Matt Gullett
|
|
|
|
|
What browsers (and what versions) are related to this ?
It could be some users have older version of IE etc...
Elaine (fluffy tigress emoticon)
The tigress is here 
|
|
|
|
|
Trollslayer wrote:
What browsers (and what versions) are related to this ?
I wish I knew!
My company works through AOL and SPSS to bring people to take our surveys. The problems were being reported to AOL and AOL was not gathering enough information to do anything about it.
It turned out to be a problem on AOLs end, but it was a very stressful day anyway.
Thanks for the reply.
Matt Gullett
|
|
|
|
|
My notebook is a member of our NT4 domain in the coorp. network. While working in the office everything is fine, using fileservers, exchange and so on.
However, when I am trying to connect to the corp.network via RAS, or even VPN during the last days, I have problems to connect to those servers. When working offline I still use my domain-account, and with the cached profile I -hope- I should be able to access all servers, as described above, using the Username and password of the cached profile. (This worked perfectly for me in NT40 and W2K). However using the same procedure in XP I always have to enter uname + pwd to connect to a file-server or exchange-server.
It is annoying, always to reenter those informations. Is there a chance to make it work as it was using NT4 and W2K? Change Reg-Settings or so?
Thanks in advance
Rainer
|
|
|
|
|
My Application is using NetDDE and runs good on Windows NT. But it doesn't run under Windows 2000. I used DDEshare.exe to create all the shares and gave them a trusted status.
DDESpy results: the first Task is a Callback. Differences:
Type = Unregister (Win 2000)
Type = Register (Win NT)
How can I make the type go Register?
Server on NT is programmed in Borland c++; I would be glad not to touch this sources.
Client on W2K will be programmed in VB, but see the Problems.
I know that NetDDE is out, but I don't want to change all the code.
Any idea? Thanks in advance.
Ralf Friedrich Hain
|
|
|
|
|
We have a NT service which listens to a TCP port. And we also have a client that connects to this TCP port for the service to perform some data processing and return the result.
So far, this service has worked perfectly. Except that when the service is with load balancing (Load balancing that comes with Win2K Adv Svr). When there is more than one service running in the load balance, the client generates a "Cannot connect to the server" error message. This does not happen when only one service is running (even in with load balancing).
Any idea of where to look to figure out what the problem might be?
Michel
It is a lovely language, but it takes a very long time to say anything in it, because we do not say anything in it, unless it is worth taking a very long time to say, and to listen to.
- TreeBeard
|
|
|
|
|
My firewall popped up a msg saying some remote system was trying to access this file. What is this thing?
PS. I'm running Win2K
"My brother says 'Hello'... So hurray for speech therapy!" -Emo Phillips
|
|
|
|
|
You might start here[^]. It seems to do rather a lot of different chores, though I also wonder why it thinks it needs to access the Internet, and why others are attempting to play with it.
"How many times do I have to flush before you go away?" - Megan Forbes, on Management (12/5/2002)
|
|
|
|
|
I have a client that has 7 Win2K Pro hosts connected as Peer-to-Peer, with 6 of them in use as data entry stations feeding the 7th host (I'll call it the Master, since it's not really a Server). Everything works fine, except for poor speed on two hosts (a cable problem, along with some minor config issues), so there's nothing really wrong. But while looking into it I noticed that from any data entry station it is possible to view all 6 such hosts, but the Master is not visible. From the Master, all 7 hosts are visible.
In every system I've seen or used if all hosts are configured properly, they all appear in My Network Places. Somehow, whoever it was that set this up managed to hide the Master from the rest, a slick trick in this case. I know it's not a foolproof security measure, but given the lack of computer skills of the data entry operators it is probably quite adequate. Monkey no-see, monkey no-do. How is this stunt accomplished? I can see a lot of practical uses for it in small office environments.
"How many times do I have to flush before you go away?" - Megan Forbes, on Management (12/5/2002)
|
|
|
|
|
Maybe the Master is not part of a domain.
Michel
It is a lovely language, but it takes a very long time to say anything in it, because we do not say anything in it, unless it is worth taking a very long time to say, and to listen to.
- TreeBeard
|
|
|
|
|
Michel Prévost wrote:
Maybe the Master is not part of a domain.
In a Peer-to-Peer network, there is no domain. But all 7 hosts are in the same Workgroup, including the one running the Master programs. All 6 data entry stations can "see" each other, but not the Master. Only the Master can display all 7 hosts, including itself, in My Network Places. A neat trick, if only I could figure out how they did it.
"How many times do I have to flush before you go away?" - Megan Forbes, on Management (12/5/2002)
|
|
|
|
|
I will ask the sysadmin at my work. They are quite at it. I'll get back to you if I have an answer.
|
|
|
|
|
Hai there!
i nead to create some stuff - hook, when user
do "Lock Computer", and then my program(in tray)
will do some actions, for example - get some URL. o smth else.
??
are there any examples?, or tutorials ??
thanks
PS: sory for my english.
----------------------------
never stop coding.
|
|
|
|
|
U mean ... like a cheat program???
I started with nothing,
And I still have lots of it left with me.
|
|
|
|
|
hm.. jep. but i am not going to do bad things...
just listen "Lock Computer/Unlock Computer" events, and
for example - write it to Database.
----------------------------
never stop coding.
|
|
|
|
|
U can get a lotsa things from http://www.astalavista.com...
I am not sure if u can get the source code... Sorry I cant help more on it...
I started with nothing,
And I still have lots of it left with me.
|
|
|
|
|
Do you mean record when these things happen ?
If so, it is called auditing and is handled by an adminstrative tool within te control panel.
Elaine
The tigress is here
|
|
|
|
|
no, just events, hook them, and do some action (with options : block, or not to block this windows message ).... mm ?
----------------------------
never stop coding.
|
|
|
|
|
We have a Win2K Pro laptop which has a file of size 1.99Mb is size. It is not an OS protected file, but when attempting to delete it the OS advises that it is already open. This even happens after a reboot. Does anyone have any suggestions as to what we can do to get rid of this damn file.
Andy
|
|
|
|
|
Maybe this is system file?
If this file located on NOT-system drive just start chkdsk from console with "Force dismount" option (/X). After check try to kill it.
|
|
|
|
|
Andy H wrote:
We have a Win2K Pro laptop which has a file of size 1.99Mb is size. It is not an OS protected file, but when attempting to delete it the OS advises that it is already open. This even happens after a reboot. Does anyone have any suggestions as to what we can do to get rid of this damn file.
You cab probably boot up into recovery console and delete it from there ...
Hope this helps .
It may be that this is a service file that is being used. In which case you can stop the service then delete the file .
Chris
|
|
|
|
|
hi all,
i want to change the defaut value of IE redirection..i.e. when a URL is not found IE is automatically redirected to autosearch.msn.com i want to redirect it to my own site..i.e..www.mysite.com..any help please...
thanks
himanshu
|
|
|
|
|
I haven't tried this, but you might give it a try. Search the Registry for the autosearch.msn.com URL and locate the keys where it appears (if any). After saving a backup copy of your registry, try changing the value of the keys found to www.mysite.com, then rebooting. IE is very consistent about following the Windows model, storing everything in the Registry instead of config files, so I'd expect this to work nicely. If not, you can at least restore everything from your backup.
"How many times do I have to flush before you go away?" - Megan Forbes, on Management (12/5/2002)
|
|
|
|
|
I'm very peckish to try SuSE Linux but I don't want to be away from my lovley Windows 2000. So I asking if it is possible to run SuSE and W2k on the same computer?
Rickard Andersson@Suza Computing
C# and C++ programmer from SWEDEN!
UIN: 50302279
E-Mail: nikado@pc.nu
Speciality: I love C#, ASP.NET and C++!
|
|
|
|
|
It is possible to run any Linux on the same machine as Win2k. Just use some boot manager.
![Beer | [beer]](https://www.codeproject.com/script/Forums/Images/beer.gif)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
