|
|
Thank u very much !!!!!
its working in sql2008 but client is running in older version(Sql2000) and in older version its unable to find the reference and producing following msg
Server: Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure
is any other method so that its working in SQL2000 as well
Thanks in advance
|
|
|
|
|
For SQL 2000, you'll need to stick with xp_cmdshell, but you need to put mkdir in front of the path you want to create:
Exec master.dbo.xp_cmdshell 'mkdir "C:\My Test\<<DATE>>"'
http://www.sqlservercentral.com/Forums/Topic604168-8-1.aspx[^]
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Thank you very much it working for me
|
|
|
|
|
|
below procedure should be the solution
create procedure sp_create_directory
(
@full_path varchar(500)
)
as
set nocount on
declare @command varchar(1000)
set @command = 'mkdir ' + @full_path
exec master..xp_cmdshell @command , no_output
set nocount off
GO
|
|
|
|
|
Thanks for your great help
|
|
|
|
|
Hi !
Here is the snip of code in question:
.......
sql = "select " + picField + " from " + table + " where " + where;
conn = new SqlConnection(connectionstring);
byte[] picture = (byte[])ExecuteScalar(sql);
Image source = Image.FromStream(new MemoryStream(picture));
Image th = source.GetThumbnailImage(w, h, null, IntPtr.Zero);
.......
public object ExecuteScalar(string strCommand)
{
object res=null;
conn.Open();
SqlCommand cmd = new SqlCommand(strCommand, conn);
try
{
res = cmd.ExecuteScalar();
}
catch(Exception e)
{ res = e.Message; }
finally
{
conn.Close();
}
return res;
}
It worked like a sharm some time ago.
Code was not changed. The table definition also was not changed and field declaration is as follows:
[Picture_Image] [image] NOT NULL
But now I get error:
unable to cast object of type 'system.string' to type 'system.byte '
I suppose that something may be changed in the server and/or DB settings. But what ??
Can somebody please shed a light on this issue?
Thanks in advance.
Regards,
Gennady
My English is permanently under construction. Be patient !!
|
|
|
|
|
Gennady Oster wrote: catch(Exception e){ res = e.Message; }
return res;
There is an error in your query which is causing the ExecuteScalar method to throw an exception. Due to the incredibly poor decision to return the exception message as a valid result from your ExecuteScalar method, the calling code is trying to cast the string containing the error message to a byte[], which will never work. Remove the catch clause from your method to allow the exception to propagate to the calling code.
The fact that you're specifying a WHERE clause but not passing any parameters suggests that your code is susceptible to SQL Injection[^]. Update your code to use parameterized queries before you get a visit from little Bobby Tables[^].
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Thanks, Richard.
Saying truth, I've already understand where I made a mistake.
I anyway want ExecuteScalar to return db error, so I simply added the test is byte for result before casting:
Object sqlResult = ExecuteScalar(sql);
if (!(sqlResult is byte))
{
return sqlResult.ToString();
}
This is the internal module, and WHERE clause is generated programmatically, so I don't see the ability to SQL Injection.
Thanks once more.
Regards,
Gennady
My English is permanently under construction. Be patient !!
|
|
|
|
|
hi to all
i have two table same below :
tableA with this columns:
ID
CodeGuid
Name
Family
---------------------
and tableB with this columns:
ID
CodeGuid
mycomulns
----------------------------
i want to left join this two table on ID and CodeGuid but i dont want use code same this:
select * from tableA Left JOIN
tableB on (tableA.ID = tableB.ID)
UNION
select * from tableA Left JOIN
tableB on (tableA.CodeGuid= tableB.CodeGuid)
----------------------------
is there another way to handle this output ?
thanks in advance
|
|
|
|
|
If both columns must match:
SELECT
...
FROM
tableA
LEFT JOIN tableB
ON tableA.ID = tableB.ID
AND tableA.CodeGuid = tableB.CodeGuid
If either column can match:
SELECT
...
FROM
tableA
LEFT JOIN tableB
ON tableA.ID = tableB.ID
OR tableA.CodeGuid = tableB.CodeGuid
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
hi,
am facing problem with the following;
my table is having 6 columns.
i want to select the data based on "from" and "to" dates,and also if i enter value in any one /two/three/.../all of the fields data should be displayed from the database.
am using this:
if ((R_Tag.Text == "") && (R_Category.Text == "") && (R_Product.Text == "") && (R_ProName.Text == "") && (R_Gate.Text == ""))
{
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "' ";
}
else if(R_Tag.Text != "")
{
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where (DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "') AND tag_id='" + R_Tag.Text + "' ";
}
else if (R_Category.Text != "" && R_Tag.Text != "")
{
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "' AND (tag_id='" + R_Tag.Text + "' OR category_id='" + R_Category.Text + "' OR product_id='" + R_Product.Text + "'OR product_name='" + R_ProName.Text + "' OR gate_id='" + R_Gate.Text + "')";
}
|
|
|
|
|
Start by reading about SQL Injection[^], and then fixing your code to use parameterized queries.
Your current approach will need 64 different queries to satisfy every possible combination. A simpler approach would look something like:
var queryBuilder = new StringBuilder();
queryBuilder.Append("select tag_id, category_id, product_id, product_name, gate_id, in_time, out_time, remarks from transaction where DATE(in_time) BETWEEN @FromDate And @ToDate");
command.Parameters.AddWithValue("@FromDate", fromDate);
command.Parameters.AddWithValue("@ToDate", toDate);
queryBuilder.Append("AND (1 = 1");
if (!string.IsNullOrEmpty(R_Tag.Text))
{
queryBuilder.Append(" OR tag_id = @RTag");
command.Parameters.AddWithValue("@RTag", R_Tag.Text);
}
if (!string.IsNullOrEmpty(R_Category.Text))
{
queryBuilder.Append(" OR category_id = @RCategory");
command.Parameters.AddWithValue("@RCategory", R_Category.Text);
}
queryBuilder.Append(")");
command.CommandText = queryBuilder.ToString();
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
thanks for reply.
but am getting fatal error at da.Fill(ds).
and :You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(1 = 1) OR tag_id = 'E2002076990B019322902641')' at line 1
here is my code: in button click;
i entered tag_id dynamically
// Connect to Mysql
String query;
System.Data.DataTable dt = new System.Data.DataTable();
String conString = "Server=localhost;Database=asset;Uid=root;pwd=root";
MySqlConnection con = new MySqlConnection(conString);
MySqlCommand command = new MySqlCommand();
command .Connection = new MySqlConnection(conString);
command.CommandType = CommandType.Text;
//command.CommandText =query;
con.Open();
MySqlCommand cmd = new MySqlCommand("set net_write_timeout=99999; set net_read_timeout=99999", con);
string fromDate = dateTimePicker1.Value.ToString("yyyy-MM-dd");
string toDate = dateTimePicker2.Value.ToString("yyyy-MM-dd");
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where (DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "')";
if ((R_Tag.Text == "") && (R_Category.Text == "") && (R_Product.Text == "") && (R_ProName.Text == "") && (R_Gate.Text == ""))
{
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "' ";
command.CommandText = query;
da = new MySqlDataAdapter(command);
ds = new DataSet();
da.Fill(ds);
//System.Data.DataTable dt = new System.Data.DataTable();
da.Fill(dt);
}
else
{
try
{
var queryBuilder = new StringBuilder();
queryBuilder.Append("select tag_id, category_id, product_id, product_name, gate_id, in_time, out_time, remarks from transaction where DATE(in_time) BETWEEN @FromDate And @ToDate");
command.Parameters.AddWithValue("@FromDate", fromDate);
command.Parameters.AddWithValue("@ToDate", toDate);
queryBuilder.Append("AND (1 = 1");
if (!string.IsNullOrEmpty(R_Tag.Text))
{
queryBuilder.Append(" OR tag_id = @RTag");
command.Parameters.AddWithValue("@RTag", R_Tag.Text);
}
if (!string.IsNullOrEmpty(R_Category.Text))
{
queryBuilder.Append(" OR category_id = @RCategory");
command.Parameters.AddWithValue("@RCategory", R_Category.Text);
}
if (!string.IsNullOrEmpty(R_Product.Text))
{
queryBuilder.Append(" OR product_id = @RProduct");
command.Parameters.AddWithValue("@RProduct", R_Product.Text);
}
if (!string.IsNullOrEmpty(R_ProName.Text))
{
queryBuilder.Append(" OR product_name = @RProName");
command.Parameters.AddWithValue("@RProName", R_ProName.Text);
}
if (!string.IsNullOrEmpty(R_Gate.Text))
{
queryBuilder.Append(" OR gate_id = @RGate");
command.Parameters.AddWithValue("@RGate", R_Gate.Text);
}
queryBuilder.Append(")");
command.CommandText = queryBuilder.ToString();
// command.CommandTimeout = 600;
da = new MySqlDataAdapter(command);
ds = new DataSet();
da.Fill(ds);
da.Fill(dt);
}
catch (Exception ex)
{
MessageBox.Show(ex.StackTrace);
} }
modified 6-Nov-13 7:17am.
|
|
|
|
|
Member 10263519 wrote: queryBuilder.Append("AND (1 = 1)");
You've put an extra closing bracket in that line. It needs to be:
queryBuilder.Append("AND (1 = 1");
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
eventhough am getting same error
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(1=1OR tag_id = 'E2002076990B019322902641')' at line 1
|
|
|
|
|
I don't have a copy of MySQL to test, but why does the error message include a specific value rather than a parameter name? I would expect it to read near '(1 = 1 OR tag_id = @RTag)'.
There seems to be contradicting information on how to pass parameters to a MySQL query. You might want to try using ?name instead of @name to see if that makes any difference:
if (!string.IsNullOrEmpty(R_Tag.Text))
{
queryBuilder.Append(" OR tag_id = ?RTag");
command.Parameters.AddWithValue("?RTag", R_Tag.Text);
}
If it still doesn't work, try running the query in the MySQL Workbench to see if that gives you any more information.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
if i keep , ? instead of @. i got error as:
Fatal error encountered during command execution .at da.Fill(ds) i have placed "Allow User Variables=True" in connection string.plz help me . how to run this query in workbench.
|
|
|
|
|
thanks for the help:i solved it in another way:
query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "'";
if(R_Tag.Text != "")
{
query=query+ " AND " + "tag_id=" + "'" + R_Tag.Text + "' ";
}
if (R_Category.Text != "")
{
query = query + " AND " + "category_id=" + "'" + R_Category.Text + "' ";
//query = "select tag_id,category_id,product_id,product_name,gate_id,in_time,out_time,remarks from transaction where DATE(in_time)BETWEEN '" + fromDate + "'AND '" + toDate + "' AND (tag_id='" + R_Tag.Text + "' OR category_id='" + R_Category.Text + "' OR product_id='" + R_Product.Text + "'OR product_name='" + R_ProName.Text + "' OR gate_id='" + R_Gate.Text + "')";
}
if (R_Product.Text != "")
{
query = query + " AND " + "product_id=" + "'" + R_Product.Text + "' ";
}
if (R_ProName.Text != "")
{
query = query + " AND " + "product_name=" + "'" + R_ProName.Text + "' ";
}
if (R_Gate.Text != "")
{
query = query + " AND " + "gate_id=" +"'" + R_Gate.Text + "' ";
}
|
|
|
|
|
hi,
I want to know how can I created a unique random alphanumeric PIN in MySQL? I have job_order_code field and I want everytime to set a unique random alphanumeric code?
Thanks.
Technology News @ www.JassimRahma.com
|
|
|
|
|
Googled? MySql also has RAND[^] function, using that you could generate random things. Do customize.
|
|
|
|
|
Jassim Rahma wrote: unique random alphanumeric PIN
Why does it need to be unique?
|
|
|
|
|
because it's a reservation code
Technology News @ www.JassimRahma.com
|
|
|
|
|
Works great on my development machines.
Not so much on any "real" machines.
Microsoft says it needs .NET 3.5 (or 4, depending on where you look)
But loading .NET 4 on the "real" machines still doesn't make it work*.
Loading .NET 4.5 does make it work. Even if the application is compiled for version 4, not 4.5
*"Doesn't work" meaning can't attach the database file, mostly. Sometimes it can't even find it.
So what was introduced in .NET 4.5 that makes all these problems go away? My development machines are still on .NET 4 and manage to work in or outside of VS. And can this piece be added separately so my uses won't be forced to install v4.5 just to make v4 applciation work? (I'm thinking it might be because I have the more full versions of SQL Server on the dev machines, too. Yes? Is there a teeny part that I can install separately to fix it?)
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
