|
You can also configure most cameras to use 'Motion-Detection' setting. In my experience, most cameras are installed in places where pictures very rarely change.
Behzad
|
|
|
|
|
The system that I've had experience allows you to set how often it captures an image. For security purposes you don't need a full video, just a good resolution picture of a face or license plate. So we have ours set to capture an image once per second and hold onto it for 60 days. We have about 30 cameras feeding into this system and it only has 2 terabyte of space in the hard drives, which we've never filled up.
|
|
|
|
|
Save it on removable harddrives, then sneakernet it to a secure location.
For that quantity of data, you probably have to go to eSATA, as there probably isn't much else that will be fast enough. There are (or at least, were) a few enclosure systems that supported USB 2, eSATA and had a custom bay so they plugged into the system like a jumbo floppy. The USB2 would likely be convenient to provide offline access without requiring special workstation setups.
Rather then try to handle it like a scheduled backup task, I'd set the system up to continually mirror the data onto the removable drives, then once a week swap them out. That way, the data path probably won't be a bottleneck.
We can program with only 1's, but if all you've got are zeros, you've got nothing.
|
|
|
|
|
I used to use a program called GOTCHA! that would only record changes.
So if you filmed yourself raising your hand and holding there for ten minutes before lowering it, on playback you'd just see you raise your hand and immediately drop it.
For interior monitoring it was great. Outside not as much because winds and shifting shadows would trigger it. But you could mask the screen to mark areas to ignore (like bushes) and areas to watch (like sidewalks)
That could reduce the recordings quite a bit. Changed images are timestamped so you can see when motion occurred.
I used it once to monitor a whiteboard that some chucklehead would alter my diagrams. I wanted to catch who was trying to sabotage my system designs. Instead, I caught a monthly cleaning crew having their way with my office and walking off with several hundred dollars of equipment.
Psychosis at 10
Film at 11
Those who do not remember the past, are doomed to repeat it.
Those who do not remember the past, cannot build upon it.
|
|
|
|
|
|
Yes. It's getting a little long in the tooth and the video format is non-standard, but it can get the job done.
Psychosis at 10
Film at 11
Those who do not remember the past, are doomed to repeat it.
Those who do not remember the past, cannot build upon it.
|
|
|
|
|
I have read a lot of the comments. Here are my 2 cents, having dealt with a lot of data, and some of the rules of imaging/cameras.
1) I definitely prefer hard wired cameras, WiFi can easily be attacked, and attacked locally.
2) Think bandwidth, you should have Cat 5 going into Gigabit or better switches
3) Certainly, every camera should be encrypting their output.
4) Because of hiccups with the OC3/External connection, you should have the ability to store some HOURS of video locally. Preferably 3-7 days if possible.
5) Consider only uploading extremely compressed feeds. 5 to 10 fps vs. 30fps.
6) Design for failure. When your RAID Degrades, it has to NOT become readonly! But transfer times will drop. Too many devices writing to one device will clog the pipe.
We had to redesign a system from ONE server to 3 servers because the bandwidth of the incoming and outgoing network cards could never be maintained. 2 servers worked, but no redundancy, and once we had to redesign things to talk to different servers, we took the extra step. The project grew a bit, and the extra server helped.
7) Plan for growth. I don't care that the number of cameras as never changed. If you can't handle a few more cameras, you are too close to an edge. 10% more cameras would make me feel safe.
A friend implemented a local storage of video, and external storage of a "snapshot" picture every 3 seconds. It was very very efficient. Some of the snapshots increased if there was motion.
So, there are a lot of variables. The big question is always WHY?
WHY do they want to keep the video? Do they need it for police, investigations, etc? Do they need to just prove somebody, or do they need to ID the person. The whys involved here should determine what approaches you can and should use. Many cameras can be lower quality, some will be required to pickup a license plate or other details, and again, using techniques that change the quality as activity is detected really help to "compress" the actual data.
Tons of questions.
Good luck.
|
|
|
|
|
I have a professional home security camera system, 16 High Res Cameras. The 1 T disk can store for about 2 weeks. They store ONLY WHEN THEY SEE MOTION!@
Take a look at the off the shelf equipment at Security Camera Direct.
Wire it!
The Irishman
|
|
|
|
|
|
Yes
I've been using their 16 camera, High res with IR for about 4 years
There very good with any help
Just be sure to get any adapters for the cable 12 volt power to the camera
The Irishman
|
|
|
|
|
Kirk 10389821 wrote: We had to redesign a system from ONE server to 3 servers because the bandwidth of the incoming and outgoing network cards could never be maintained. 2 servers worked, but no redundancy, and once we had to redesign things to talk to different servers, we took the extra step.
I totally missed the concept you are trying to describe. More explanation is welcome.
Kirk 10389821 wrote: 7) Plan for growth.
Smirk ! Mind reader ??? Kreskin ? If not, you and I are definitely parallel thinkers.
That's a key pillar of the business concept.
From what we're seeing in the logistics of software, hardware, and firmware, plus the connections (an internet connection is integral to this) that's also the single biggest problem to overcome. In fact, we're probably spending more time on this one problem (adding more cameras) than all the others, as we definitely want the customer to do exactly that.
Kirk 10389821 wrote: The big question is always WHY?
Nice brain. We in the gang here will have a philosophical round table about those sorts of concepts you've described. Thanks for the input; on all of your post.
I will upvote it.
modified 13-Jul-15 16:10pm.
|
|
|
|
|
C-P-User-3 wrote: I totally missed the concept you are trying to describe. More explanation is welcome.
There was a life-lesson in here. The design had 100Mb incoming network card, and a 100Mb outgoing network card. Little did we know that the hard drive and the bus could not keep them busy. (This was circa 1998). We had incoming files coming through at full throttle. But when we turned on the outbound channel, it was maybe doing 20-25% of 100Mb. It took a lot of math and analysis to see we had the server not only reading but writing to the HD, and then reading other areas and trying to send it out via the network. Between the drive max throughput, and the BUS speed, we had over-estimated what we could accomplish. And testing it by testing only the incoming half and the outgoing half (separately) was not good enough to find the problem. (That seems obvious right now, and the life lesson is test it like it is ACTUALLY going to be used).
C-P-User-3 wrote: nice brain. We in the gang here will have a philosophical round table about those sorts of concepts you've described. Thanks for the input; on all of your post.
Thanks... I hope it helps. For me, the WHY is the most important question. It is what allows you to solve problems in the most interesting ways. I often remind new clients that my job isn't to give them what they want, but to deliver what they need! That comes from getting into the why! As does knowing how to design the system properly in the first place. (Actually, we audited a compound that had video cameras with labels indicating the IP address of the camera. These were security cameras, at least they were supposed to be. I have no problem with labeling the equipment with Random TAG numbers that require a secure spreadsheet to look them up.)
|
|
|
|
|
This is a little crazy. How about recording only when motion is detected? That alone would save tons of resources, at the expense of a little complexity.
|
|
|
|
|
A pipe just burst in the wall in my mother's bathroom. We have called the water department, and they have a guy on his way right now, having told him to go into 'emergency mode'.
What a pain, and the day after my father's funeral as well.
I hate life. I would change it, but I don't have access to the source code. (With regards to the member who has something along those lines in his sig).
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
I am sorry for your loss ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif) .
It may not be any comfort, but I've experienced that kind of perversity in the universe myself. The day my father-in-law died, we were at my mother-in-law's house and starting to make arrangements. The phone rang and my mother picked up the phone. It was a local cemetery trying to sell plots. Somehow, they'd received notification that my father-in-law had died.
It was the first time I'd ever heard my mother drop an F-bomb. Several, in fact.
Software Zen: delete this;
|
|
|
|
|
That sucks. Sorry for your loss.
Brisingr Aerowing wrote: I hate life.
It could be worse - the day after my mother's funeral my father died. 
Contrary to popular belief, nobody owes you anything.
|
|
|
|
|
Where's the cringe icon when it's needed?
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
My condolences!
|
|
|
|
|
I am a Planetside 2 Player. The game has been down due to DDOS attack for about 2 days.
If it is going on That long then They must not be too worried about being caught and
I wonder how much money that the game company has lost.
I probably clean up nice.
|
|
|
|
|
People who do things like that need to be put on a one way rocket to interstellar space, and tortured by robots until they near a black hole, then all of the 'hackers' would be put in special pods and launched into the black hole.
(I would go into more detail, but then it wouldn't be KSS. It probably wouldn't even be safe for the Back Room!)
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
The company who owns and runs PS2 is probably looking for another company to house their game servers, and also looking for a long term solution to this problem.
Aren't hackers pimple faced teens who are so ugly and disgusting a dog wouldn't f*** them? I thought they were, could be wrong.
|
|
|
|
|
How do I get in touch with someone who have developed a solution?
|
|
|
|
|
What kind of solution?
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
|
If it's an article, then put a comment at the forum at the bottom of the article. That should reach the member.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
