|
A few years ago I really, really, finally had to learn web technologies after spending most of my career in the *Nix, C/C++ and Informix world.
I was utterly horrified to learn that the internet is essentially cobbled together with a mish-mash of scripting languages. In some software houses its like the Wild West! In the end you have to be responsive to the job market but a little part of my programming soul died when I had to work with Perl on Apple Macs.
If you have to make the transition into a new environment like Python, then so be it. But lets not kid ourselves that it is the best thing since sliced bread. Learning a new fangled scripting language is just another obstacle to earning a living IMO.
I'd much rather the industry settle on one language and set of frameworks and make it universal. Then I can spend my time doing my job and learning to do it better, instead of having to keep back tracking over the same basic stuff over and over again. The patron saint of Software Developers should be the mercurial David Bowie forever singing "Changes". Whenever a another smart arsed dev invents a new language, just for fun and says this is cool everyone should use it, all I hear is Madonna singing "Like A Virgin".
|
|
|
|
|
I received some of my baggage the other day. Including what was my computer.
The packers had wrapped it very well. A serious amount of very thick padded paper material. Then it went inside a large carton with more packaging. Then that carton went inside a wooden crate for shipment.
The computer wouldn't even turn on, so I opened it up.
Note: No visible damage to the crate, the carton, or the computer case itself.
Two of the SATA connectors on the motherboard were broken off. One SATA cable at the hard-drive end was destroyed. Another SATA cable at the motherboard-side had the motherboard-side connector stuck inside it.
What kind of g-force would be required to yank soldered-on connectors from a motherboard, and snap the connectors from the cables?
There were no loose parts inside the case. Any shear had to have come from just the weight of the SATA cables.
(Needless to say, I've ordered a new MB, RAM, and CPU, since getting an exact replacement of 5 year old tech would have cost more than just buying new tech. I won't know what else is broken until I get all that and try to turn it on. Any bets on the condition of the 6 hard drives and the GTX video card?  )
|
|
|
|
|
GenJerDan wrote: Any bets on the condition of the 6 hard drives and the GTX video card?
They may work: HDD's "autopark" the heads on power down, so hopefully they won't have impacted the platters. But if the force is sufficient to yank soldered connectors out, then the electronics in the drives may well be damaged. The video card? Ouch. Heavy heat pipes, heavy fans ...
Contact the movers: they should have insurance to cover it.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Oh, yeah. I'll be reimbursed for it. 
|
|
|
|
|
Maybe happened on packing day?
Wrapped item dropped into the carton or/and carton dropped into the crate - the padding and tightness of packing would have absorbed any chance for he item to bounce/deflect.
Sin tack ear lol
Pressing the any key may be continuate
|
|
|
|
|
The Russians did it.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
You can't prove that!
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
The trailers on semi's bounce like crazy inside. back in 99 my Dad used space in his trailer (was driving for a moving co at the time so was easy to do) to bring a car from one side of the US to the other. It was heavily chained down; but still managed to bounce 5-6" up enough times to completely batter the paint off underneath the loadbars used to suspend cargo above it.
Even if you can read them; I'd assume the HDs are walking dead and suck the data off and retire them asap.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
GenJerDan wrote: Two of the SATA connectors on the motherboard were broken off. One SATA cable at the hard-drive end was destroyed. Another SATA cable at the motherboard-side had the motherboard-side connector stuck inside it.What kind of g-force would be required to yank soldered-on connectors from a motherboard, and snap the connectors from the cables?
Most likely cause -- vibration damage. The solder used as the mechanical attachment failed due to metal fatigue from repeated stress of the cable flopping around inside the box. Look at the solder, it probably looks all crystalline.
The hard drives may be OK or not, depending on what kind of vibration stresses they were designed to handle. However, as others have suggested, don't trust them anymore.
We can program with only 1's, but if all you've got are zeros, you've got nothing.
|
|
|
|
|
Yeah, I made that mistake once. Now I move my own equipment.
the constant "bouncing/rattling" is what does most of the damage,
think about how you open a stuck jar top. Tapping it with the handle of a butter knife.
Same concept. except you let them tap like that for 12+ hours. LOL.
I would replace the powersupply for similar reasons. When that goes, it will take the MB
with it!
I also had UPS deliver a computer once where I had to file a claim. They refused to pay it,
saying it had to be packaged to be dropped REPEATEDLY from 6 feet high without risk of damage.
The fine print wins again. Of course it explains Dells packaging. LOL
|
|
|
|
|
Kirk 10389821 wrote: 12+ hours
Heh heh. They packed it all up on the 22nd of November and it arrived here on the 27th of December and sat...somewhere...before I could take delivery.
Well, it was 5 years old, about due for retirement, anyway (or being passed down to my 8 year old). 
|
|
|
|
|
|
I've ordered one of these: Chuwi Hi12 Tablet[^]
Which looks interesting!
Why did you go for the 10 inch rather than the 12 out of interest?
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Didn't know there was a 12 inch and I was recently given a case for a 10.1 so no brainer and I'm used to a 10.1 and... Bloody good value and it got here in 4 days from Hayes - a lot I looked at shipped from China which I'm not keen on in case it goes wrong - you did ask
We can’t stop here, this is bat country - Hunter S Thompson RIP
|
|
|
|
|
Yeah, the "warrantee from China" bit is a little concerning - but most of the electronic stuff built there is pretty well made these days (most iPhones, a load of tablets, etc.) so I'm not too worried - the reviews I've read haven't mentioned any problems so far.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
pkfox wrote: Didn't know there was a 12 inch
pkfox wrote: I'm used to a 10.1
That is what she said...
|
|
|
|
|
OriginalGriff wrote: Why did you go for the 10 inch rather than the 12 out of interest?
Maybe he's not as accustomed as someone else is? 
CALL APOGEE, SAY AARDWOLF
GCS d--- s-/++ a- C++++ U+++ P- L- E-- W++ N++ o+ K- w+++ O? M-- V? PS+ PE- Y+ PGP t++ 5? X R++ tv-- b+ DI+++ D++ G e++>+++ h--- ++>+++ y+++* Weapons extension: ma- k++ F+2 X
If you think 'goto' is evil, try writing an Assembly program without JMP. -- TNCaver
"Go ahead, make my day"
|
|
|
|
|
I'd be interested to hear feedback on these, I've been tempted for a while for when I'm working on the go, probably mostly to use to RDP onto proper machines, so I'd probably get they keyboard included.
|
|
|
|
|
I wondering if a un-paid-for review of them (and the Fire tablet I got to tide me over) would be permitted here as an article? If so, then I'll do one once I've got my Hi12 ...
@Chris-Maunder - would that be allowed, and if so in what category?
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
|
Absolutely. The hardware review section is your friend (and we need more reviews I reckon!)
cheers
Chris Maunder
|
|
|
|
|
The 10.1" Chuwi is absolutely brilliant. It runs anything that you can run on a windows machine with little or no effort -- and I tend to have a lot of stuff open.
I had no trouble at all with it until I managed to drop it from too great a height to land face-down on a central-heating radiator.
Even now, everything works perfectly -- except for the severely cracked touch-screen. But it's got full-sized USB ports, so adding a mouse and keyboard isn't a biggie.
I, too, am waiting on a Hi12 -- that's about as good a "review opinion" as you can get.
With its bigger screen, I won't have to carry a laptop with me all the time.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Was there room to get VS on it? And if so, did it run well?
(The Hi12 uses the same processor / ram combo so if it works on one, it should work on the other)
I also ordered the pogo-pin keyboard, and am dithering over whether to add the stylus or not...
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
I installed 2008 to a mem card (so that I could use the internal storage for important stuff, like movies and music), and it ran fine. I attributed any occasional lag to the fact that it was on a mem card.
Compile time was a little slow, but it always was, with 2008.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Interesting. I guess VS2015 is going to be horrible though ... Maybe 2010?
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
