|
Message Closed
modified 11-Feb-19 12:17pm.
|
|
|
|
|
Doing so has huge problems. First, if the network connection to where you store the XLAM file goes down, the extension no longer works.
Next, if you screw up the code in the XLAM and put it in the stored location, you break it for EVERYONE.
And, if your code uses COM-based components, you have to install the thing the components anyway because you have to write the registry information used to tell the machine where to find the components and how to run them.
Do yourself, and your customers, a favor and just copy it locally, a.k.a.: install it.
As someone who repackages and deploys software as my primary job, running code from a network share is ROYAL PAIN IN THE ASS!
|
|
|
|
|
Hi Dave,
Thanks for your reply.
Sorry did not noticed your reply so deleted the question posted.
Sorry for deleting the post added.
Thanks
Manju
|
|
|
|
|
Hi Team,
I am trying to split the cells if comma and space .
I tried below code.Its spliting for space now.
How can i change it so that it will check for multiple(both space and comma)
Dim splitvals As Variant
Dim totalVals As Long
Set sh1 = ThisWorkbook.Sheets(1)
Set sh2 = ThisWorkbook.Sheets(2)
sh2.Cells.Clear
lrow1 = sh1.Range("A65356").End(xlUp).Row
For j = 2 To lrow1
splitvals = Split(sh1.Cells(j, 2), " ")
For i = LBound(splitvals) To UBound(splitvals)
lrow2 = sh2.Range("B65356").End(xlUp).Row
lrow3 = sh2.Range("A65356").End(xlUp).Row
sh2.Cells(lrow3 + 1, 1) = sh1.Cells(j, 1)
sh2.Cells(lrow3 + 1, 2) = splitvals(i)
Next i
Next j
Even i tried:
splitvals = Split(sh1.Cells(j, 2), ", " " ")
Please suggest me .
Thanks
Manju
|
|
|
|
|
Most method calls operate on objects, but your Split call does not appear to be connected to any object. Where is the documentation for that method?
|
|
|
|
|
Dim splitvals As Variant
Dim totalVals As Long
Dim myData As Workbook
Set myData = Workbooks.Open("D:\Test.xlsx")
Set sh1 = myData.Sheets(1)
Set sh2 = myData.Sheets(2)
sh2.Cells.Clear
lrow1 = sh1.Range("A65356").End(xlUp).Row
For j = 2 To lrow1
splitvals = Split(sh1.Cells(j, 2), ",")
For i = LBound(splitvals) To UBound(splitvals)
lrow2 = sh2.Range("B65356").End(xlUp).Row
lrow3 = sh2.Range("A65356").End(xlUp).Row
sh2.Cells(lrow3 + 1, 1) = sh1.Cells(j, 1)
sh2.Cells(lrow3 + 1, 2) = splitvals(i)
Next i
Next j
Thanks
Sharan
|
|
|
|
|
That is just a repeat of your question. I asked you where the Split method is defined.
|
|
|
|
|
|
Quote: How can i change it so that it will check for multiple(both space and comma)
You can't pass multiple delimiters into VBA Split function.
You have to call Split function again:
For j = 2 To lrow1
splitvals = Split(sh1.Cells(j, 2), " ")
For i = LBound(splitvals) To UBound(splitvals)
lrow2 = sh2.Range("B65356").End(xlUp).Row
lrow3 = sh2.Range("A65356").End(xlUp).Row
sh2.Cells(lrow3 + 1, 1) = sh1.Cells(j, 1)
sh2.Cells(lrow3 + 1, 2) = splitvals(i)
Next i
splitvals = Split(sh1.Cells(j, 2), ",")
For i = LBound(splitvals) To UBound(splitvals)
lrow2 = sh2.Range("B65356").End(xlUp).Row
lrow3 = sh2.Range("A65356").End(xlUp).Row
sh2.Cells(lrow3 + 1, 1) = sh1.Cells(j, 1)
sh2.Cells(lrow3 + 1, 2) = splitvals(i)
Next i
Next j
|
|
|
|
|
Guys need some help here i was trying to delete both datagridview and dataset at the same time
but i seems hard to find some result in what i'am doing so may some one can help me please.... 
here is my code in retrieving data from database :
Try
OpenDatabase()
cqCnn.Open()
Using cmd As New SqlCommand("Select * from baseMergeView where department = '" & tscmddept.Text & "' or fullname Like '%" & tssearch.Text & "%'", cqCnn)
dtmerge = New virualMerge.MergeTableDataTable
Dim adapter As New SqlDataAdapter(cmd)
adapter.Fill(dtmerge)
End Using
DataGridView1.AutoGenerateColumns = False
DataGridView1.DataSource = dtmerge
Catch ex As Exception
MessageBox.Show(ex.Message, "Data", MessageBoxButtons.OK, MessageBoxIcon.Warning)
Finally
CloseDatabase()
cqCnn.Close()
End Try
and here is my code when iam trying to delete the rows at the same time :
tried this one
Dim i As Integer = 0
Do While i < DataGridView1.Rows.Count
If DataGridView1.Rows(i).Cells(0).Value = True Then
Dim item As virualMerge.MergeTableRow = DirectCast(DirectCast(DataGridView1.CurrentRow.DataBoundItem, DataRowView).Row, virualMerge.MergeTableRow)
item.Delete()
DataGridView1.SelectedRows(i).DataBoundItem.Delete()
End If
If i = DataGridView1.Rows.Count Then
Exit Do
End If
i = i + 1
Loop
and this one to :
For x As Integer = 0 To DataGridView1.Rows.Count - 1
If DataGridView1.Rows(i).Cells(0).Value = True Then
Dim item As virualMerge.MergeTableRow = DirectCast(DirectCast(DataGridView1.CurrentRow.DataBoundItem, DataRowView).Row, virualMerge.MergeTableRow)
item.Delete()
DataGridView1.SelectedRows(i).DataBoundItem.Delete()
End If
Next
it seems iam going nowhere with this... Please Help
|
|
|
|
|
Hi all,
I need to load an Test.xlxs file form "D" drive and write the same content to new workbook in sheet1.
Add sheet2 in the workbook and filter the workbook and write the filtered into sheet2 to on workbook.
I have tried the below code but its writing to the same input file with sheet2 but not in the new workbook.
Input file will contain
DrinkID Reciepe_Dat
2 Absolute,Enter,Test
3 Decupper,Enter,Test
4 "Absolute
"
Output is having
DrinkID Reciepe_Dat
2 Absolute
2 Enter
2 Test
3 Decupper
3 Enter
3 Test
4 "Absolute
"
but writing to the same input file.
here is my code:
Sub splitbycells()
Dim splitvals As Variant
Dim totalVals As Long
Set sh1 = ThisWorkbook.Sheets(1)
Set sh2 = ThisWorkbook.Sheets(2)
sh2.Cells.Clear
lrow1 = sh1.Range("A65356").End(xlUp).Row
For j = 2 To lrow1
'splitvals = Split(sh1.Cells(j, 2), Chr(10))
splitvals = Split(sh1.Cells(j, 2), ",")
For i = LBound(splitvals) To UBound(splitvals)
lrow2 = sh2.Range("B65356").End(xlUp).Row
lrow3 = sh2.Range("A65356").End(xlUp).Row
sh2.Cells(lrow3 + 1, 1) = sh1.Cells(j, 1)
sh2.Cells(lrow3 + 1, 2) = splitvals(i)
Next i
Next j
sh2.Range("A1") = "DrinkID"
sh2.Range("B1") = "Reciepe_Dat"
End Sub
Thanks
Sharan
|
|
|
|
|
Where is the code to write the new workbook?
|
|
|
|
|
Hi,
I have updated the code where it loads the file from some path.
And setting it to myData.
Set myData = Workbooks.Open("D:\B_Test.xlsx")
Set sh1 = myData.Sheets(1)
Set sh2 = myData.Sheets(2)
Now how can i change the code so that it writes to a new workbook and and set that to myData.
Set myData = "New WorkBook"
Thanks
Sharan
|
|
|
|
|
You need to create a new Workbook, add some Worksheets and fill in their content, then save the new Workbook. Something like the following (Yes, I know it's C# but the principle is the same):
Excel.Workbook excelWorkBook = excelApp.Workbooks.Add(Type.Missing);
Excel.Worksheet excelWorkSheet = excelWorkBook.Sheets.Add(Type.Missing);
excelWorkSheet.Name = "Sheet1";
int column = 1;
foreach (DataGridViewColumn dgc in dgvVolunteers.Columns)
{
excelWorkSheet.Cells[1, column] = dgc.HeaderCell.Value;
++column;
}
column--;
int row = 2;
foreach (DataGridViewRow dgr in dgvVolunteers.Rows)
{
for (column = 0; column < dgr.Cells.Count; ++column)
{
excelWorkSheet.Cells[row, column + 1] = dgr.Cells[column].Value;
}
row++;
}
excelWorkBook.SaveAs("MyFileName.xlsx");
excelWorkBook.Close();
|
|
|
|
|
Thanks richard.
I will try it out.
Thanks
Manju
|
|
|
|
|
In FoxPro you can use the ampersand character to indicate macro substitution. For example:
TableName = "Companies"
FieldName = "Location"
Use &TableName index &FieldName
FoxPro would see the '&' and substitute "Companies" in place of &TableName and "Location" in place of &FieldName.
Is there a way to do something similar in VB.NET?
|
|
|
|
|
Nope. You can execute your query by giving it a string. You can manipulate this command-string to your hearts content.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
|
|
You're welcome 
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
I agree with Eddy Vluggen that there's no FoxPro macro substitution in vb.net, but depending on data provider you can use:
1) sql variables
2) CommandType to define:
- StoredProcedure - the name of a stored procedure,
- TableDirect - the name of a table,
- Text - any SQL command (text - Default).
and
3) Command.Parameters
For example:
Dim sConn As String = "properconnectionstring"
Dim oRdr As OleDbDataReader
Dim dt As DataTable = New DataTable()
Dim empIdToFind As Integer = 111
Using oConn As OleDbConnection = New OleDbConnection(sConn)
oConn.Open()
Using oComm AS OleDbCommand = New OleDbCommand()
oComm.Connection = oConn
oComm.CommandType = CommandType.Text
oComm.CommandText = "SELECT * FROM MyUsers WHERE EmpId=@empid;"
oComm.Parameters.AddWithValue("@empid", empIdToFind)
oComm.ExecuteNonQuery()
oRdr = oComm.ExecuteReader()
dt.Load(oRdr)
End Using
oConn.Close()
End Using
|
|
|
|
|
thanks Maciej, extraordinary explanation.
|
|
|
|
|
|
I want to calculate sum of Net_Amount based on TC_Group='food' using cheque_number as base criteria using VB code
Actual Sheet
CHEQUE_NUMBER TC_GROUP NET_AMOUNT
A001477920190111084600 FOOD 1500
A001477920190111084600 FOOD 1500
A001477920190111084600 TAX 141.75
A001477920190111084600 TAX 141.75
A001477920190111084600 TIPS 75
A001478120190111103600 FOOD 1500
A001478120190111103600 TAX 141.75
A001478120190111103600 TAX 141.75
A001478120190111103600 TIPS 75
Desired Output
CHEQUE_NUMBER TC_GROUP NET_AMOUNT
A001477920190111084600 FOOD 3000
A001478120190111103600 FOOD 1500
|
|
|
|
|
Where is the data stored?
What have you tried?
Where are you stuck?
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
