|
In Android development the software version is an integer. Google Play uses this integer to determine when an upgrade is available - if the version number on Google Play is larger than on the device Android will download and install the new version.
|
|
|
|
|
Not a number.
I remember when the D language was still being tested by a few people and Walter asked us whether or not it would be confusing to go from 0.99 to 0.100 -- nope, not confusing.
|
|
|
|
|
Definitely count up for each part. These are not decimal numbers.
My version numbers are always major.minor.build.
Major versions are reserved for either complete rewrites or major feature packs. Minor versions are for feature changes and bug fix packs. The build number is rather obvious but also doubles as a hotfix ID if needed.
Every time the major version changes, the minor version and build numbers get reset to 0.
|
|
|
|
|
Every time the major version changes, the minor version and build numbers get reset to 0.
Build number to zero, really?
Minor to zero, yes of course, but the build number is (in our case) a unique, ever-growing id right from the build server, which can not be manipulated and currently is in the mid-thousands
|
|
|
|
|
Build managers frequently count the number of executions of a given build project, assigning each build a number from a dense series local to that project. If this is what you refer to as the build number, and you for each major release define a new build project, zeroing the build number comes automatically.
The global build number carries very litte information about your project. Any other build project, unrelated to yours, will modify it. The difference between two global build numbers does not tell if they span one or a dozen builds of your project. The project local number tells if the older build was the last before this one, three versions back, ten versions back.
|
|
|
|
|
Yes, a new build project resets, thats true.
Our setup is that the scope never changes. scope is meant in terms of "visual studio solution" or "android studio project".
Each app has one and only one build project on the build server. Spawned over branches, release channel, alpha channel, all that stuff.
So each "channel" does not have continuous build numbers.
We do this for the app/play stores as they want unique numbers and we just use the build number from the build server as apk version.
only exception is the nightly full-build-test-CI build. those will never see light of day outside the testing environment. these builds have their own build number.
alpha and release share a build number, and each build gets tagged with its channel name.
so we have, for instance, 5270-77 are alpha and 3 days later the 5278 is the release.
the builds are tagged on the build server and we can run reports on a per-channel basis to see which builds we have.
each channel has different retention times, how long artifacts are kept before they get deleted.
nightly gets purged every day (it purges before the next starts), if there is not a freezing tag set, alpha stays for 10 days, release forever.
we can set freezing tags to prevent specific artifacts from being deleted, if they need closer investigation in case of problems/errors/failed tests.
but all-in-all we just use that auto-generated number to keep the artifacts unique. we don't have so many rules in place and nobody is telling us how and what we build. we are a small company (<50 ppl) and this is very good 
|
|
|
|
|
I knew I was going to get a comment on that.
Yeah, I reset the build number for the major version changes. The major versions are the new base version upon which everything else is built.
I don't change the major version for, say, adding a pack of 5 smaller features. I change it for complete rewrites, like if I'm taking over a badly written project, or if it's a large pack of sweeping changes across most of the app, or a large pack of major feature additions, usually something that either completely changes the look and feel of the app or breaks backwards compatibility, if that's on the table, or I rewrite to use a more modern technology stack.
I really don't change the major number very often. My minor versions usually get into the teens or twenties before I go for a major version change.
|
|
|
|
|
Ours are m.n.bbbb, where m is the major version, n the minor version, and bbbb is the build number.
Each m.n value denotes a significant release of the product.
Oddly, each specific m.n has it's own range of build numbers. The ranges do not intersect. For example, product 1.1 will have build numbers 1000-1499, while product 1.2 will have build numbers 1500-2499. This was required to make the "document control" people (who manage ECO's[^]) happy for some inexplicable reason. One of the minor annoyances working for a company where engineering management is all hardware engineers and all processes are hardware-oriented, whether it makes sense or not.
Software Zen: delete this;
|
|
|
|
|
I personally treat them as token-separatet number sets. Major[dot]Minor. Granted, among the reasons is my fear of comparing floats and version numbers have to be frequently compared.
|
|
|
|
|
I thought some one would have mentioned it by now.
It's called Semantic Versioning and you can read the spec at Semantic Versioning 2.0.0 | Semantic Versioning[^]
The About section at the bottom states:
"The Semantic Versioning specification is authored by Tom Preston-Werner, inventor of Gravatars and cofounder of GitHub."
If it's good enough for him...
|
|
|
|
|
Not decimals.
Per your example, 2.4 is the fourth revision.
2.40 is the fortieth revision (1 more than 39)
For retail software, version numbers are always a political decision driven by marketing.
Below can be used for in house software:
You can use version numbers to represent the branches.
10.0, 10.1, 10.2, etc. are different labels along the 10 "main" branch.
10.1.x would be a support build on a separate branch that is initialized from the 10.1 label.
11.0 would indicate that all 10 changes have been re-integrated and resolved and time for a fresh start.
|
|
|
|
|
If I understand your question right, here's what I've been taught: it's best to think of them in the "count up" way. Each piece is a different part: majorVersion.minorVersion (some include another dot for bugfixVersion or some such. I think I've seen up to four parts.)
How you determine whether a release is "major" or "minor" (and thus which part you change) is up to you. Something you might consider major (rewrite data access layer) is not to your clients; they don't see any changes. Something you might consider minor, might be major to your clients (re-styling the site so it totally looks different, even though nothing changed under the hood).
One thing to keep in mind: once you've decided a release increments majorVersion, minorVersion resets to 0 (i.e., we're starting out on the 3rd big release. There will undoubtedly be smaller releases which then push it to 3.1, 3.2, etc, etc).
|
|
|
|
|
Apparently I am an odd-ball when it comes to using version #s. Our app is comprised of a single EXE "shell" with all the functionality in individual DLLs. Not all DLLs get updated in every release. I use a version numbering system "YY.MM.DD.XX" where YY.MM.DD is the date of the DLL's release. XX is normally "0" but if we had to do a revision of the DLLs within the same date we'd increment that value. So a DLL released today would be v19.2.21.0 but a second release today would be v19.2.21.1.
|
|
|
|
|
With RAD, there is little time to think (much) about the versioning. You mostly want to know whether someone is testing / using an earlier or later version when dealing with multiple "cells".
So I just let Visual Studio do the counting. Just make sure all the modules in the project are using the same pattern. (AssemblyInfo.cs)
Assembly Versioning | Microsoft Docs
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
|
I use Microsoft's versioning too; not their "do as I say", but their "do as I do". This gives the sequence:
1, 2, 3, 3.1, 3.11, 95, 98, 98SE, ME, 2000, XP, Vista, 7, 8, 8.1, 10. Then the sequence ends. It's clear, unambiguous, intuitive.  The non-numeric version numbers just keep the users on their toes.
|
|
|
|
|
Made me laugh! Thank you 
|
|
|
|
|
Mike Barthold wrote: Decimal version flow:
2.1 followed by hotfix 2.11, 2.12, etc
Next minor release after 2.1 can be 2.2 (= 2.20)
Count up:
2.1 followed by 2.2, ... ... 2.8, 2.9, 2.10, 2.11 and so on
Took me a bit to figure that out.
But basically there is a third variation.
Each 'number' is a decimal. So 2.1 is followed by 2.2, etc and then up to 2.10, 2.11, etc.
Other than that version is a policy decision that the releasing entity sticks to.
Thus as at least one other poster suggested the following is a valid policy. Although the last tends to be overkill.
<major version="">.<minor version="">.<build number="">.<revision>
Mike Barthold wrote: 2.1 followed by hotfix 2.11, 2.12, etc
Next minor release after 2.1 can be 2.2 (= 2.20)
Sounds like a bad policy decision to me.
Hotfix and minor are release decisions. But that shouldn't impact versioning.
The policy should define what how a release decision is made but the contents of the release define what happens to the version number. And a hotfix would normally be a minor revision because it is in fact a release and because is is a fix (just as presumably there are other fixes in any release.)
|
|
|
|
|
Having don this a few ways:
2.1
2.01
2.00.1
Major.Minor[.BugFix] was the meaning.
And we shifted to a mandatory 2 digits for Minor (2.01, 2.02, Counting up).
Where the Least increment was for normal weekly/daily releases.
2.50 would be a pretty sizable JUMP, and we try NOT to get to 3.00 naturally (99 updates).
But we will GAP the numbers to imply certain milestones.
The BugFix concept was added so our AutoUpdater could IGNORE them. We could identify them and let users choose to update to them with a strict warning. The average user would never get the message, and never get that version. (Beta Channel users would!)
The instant you add a second decimal... You realize you are not dealing with a number, but a string!
|
|
|
|
|
Anxious western sweets (8)
We can’t stop here, this is bat country - Hunter S Thompson RIP
|
|
|
|
|
38. Be aware of sounding negative (4)
|
|
|
|
|
|
ya 
modified 20-Feb-19 0:51am.
|
|
|
|
|
Nice one!
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
