|
Here are some of the things I've found:
1. if you gets one without a rechargeable feature - like it takes AA batteries - it will last longer.
2. Cheap ones aren't very accurate, but also tend to be both hand friendly because the designers don't care about "ergonomics" - speaking as a lefty, I hate when they *do* care.
3. Bluetooth is a battery pig.
Edit: If you CAD at your desk you may consider getting a wired gaming mouse, and keeping cheap, long life one around for regular use. You can plug both into windows at the same time (or at least you used to be able to). It might not be the most ideal thing, but what you want (long life + accuracy) is hard to get because of all the radio traffic it requires.
Edit 2: Some mice have a charging docking bay that they just slide into. If you can find one that meets your requirements and has one of those, as long as you don't forget to dock it the battery life shouldn't be an issue.
Real programmers use butterflies
modified 16-Feb-22 14:08pm.
|
|
|
|
|
honey the codewitch wrote: if you gets one without a rechargeable feature - like it takes AA batteries - it will last longer.
You are probably right but I don't see why. I used to put 2 NiMH rechargeables in my Microsoft mouse and they would last 6 months. Why the frigging LiIon-s can't do it.
honey the codewitch wrote: Cheap ones aren't very accurate
That's a problem. For any CAD work I need to be somewhere between 2000 and 5000 dpi if I want to work comfortably. Otherwise I need to zoom to tremendous scales to hit something.
Looks like I have to wait for the 22nd century for a decent mouse. 
Edit:
honey the codewitch wrote: If you CAD at your desk you may consider getting a wired gaming mouse
Unfortunately it looks like that 
Mircea
|
|
|
|
|
Refresh. I edited my previous reply a couple of times. Maybe what I added will help. 
Real programmers use butterflies
|
|
|
|
|
Me too  Thanks for suggestions!
Mircea
|
|
|
|
|
I second the idea of two mice. Keep the accurate mouse in reserve and it will outlive its drivers.
If you are using optical and need that level of resolution, then the surface/mousepad texture must make a huge difference.
|
|
|
|
|
It is a possibility but changing mouse resolutions is unpleasant. I find it changes my eye to hand coordination.
For the moment I’m debating between using the Corsair as a corded mouse or throwing another 60$ or so on a Logitech G305.
Mircea
|
|
|
|
|
Understood. I HATE using another person’s mouse because of preference differences, acceleration, etc. I see what you are saying.
Not a problem anymore because we always screen share due to covid even if we are sitting 3 meters apart!
|
|
|
|
|
Have Logitech M215 mouse and K360 keyboard. amazing battery life and uses standard AA batteries
Standard batteries are the way to go. Mouse accuracy is very good. Uses Logitech wireless USB receiver for both mouse and keyboard
|
|
|
|
|
Whatever you get, I recommend a laser sensor for precision movement. Optic sensors are ok but in my experience they have a very noticeable "dead zone" if you use very sensitive settings. I had a Corsair M60 Pro that was great for probably 5-6 years but then the right-click died a couple months back. I'm using a Logitech M500s now (had to find something local) which has been ok. The construction feels good (a nice stiffness to the clicks) but the sensor is dog-water at ~3000 dpi or higher. If you move the mouse a millimeter at a time from a dead stop as if you were carefully adjusting the cursor position, the cursor sometimes won't even move. You have to "snap" the mouse to kind of "wake up" the sensor before any fine movement.
|
|
|
|
|
Jon McKee wrote: Whatever you get, I recommend a laser sensor for precision movement. Optic sensors are ok but in my experience they have a very noticeable "dead zone" if you use very sensitive settings.
That's what I used to know too. Seems however that these days special optical sensors are back in the game. Logitech calls them HERO or something. AFAIK Corsair has also an optical sensor and cannot complain about any lack of sensitivity. Maybe that's why it drains so much battery.
Mircea
|
|
|
|
|
Interesting. I just looked it up and wow that HERO sensor is a leap. 25,600 max DPI? Who on Earth needs that? Pretty neat though, I wonder how they pulled that off and if it requires some special mouse-pad to reliably achieve that. 1ms polling rate too which surprises me. A lot of the optical mice (including my M500s) use the default 8ms which is... not as awful as people say but certainly noticeable.
|
|
|
|
|
I would recommend an Evoluent mouse, even if it breaks all of your requirements 
Evoluent VerticalMouse Vertical Mouse ergonomic mouse ergonomic computer mouse carpal tunnel syndrome repetitive stress disorder RSI[^]
- Alternating is not necessary anymore, because the vertical position is not causing RSI - This mouse literally got me rid of the carpal tunnel syndrome I suffered from before using it.
- Resolution is higher than you will ever need, and I am the kind of guy doing pixel-precise screenshots.
- You can choose wireless, but I prefer hard wired for everything - a cable is reliable, and I have not had any problem with cables lying around on my desk.
- Cheap is expensive -> I bought my Evoluent mouse in ... 2005, it still works like a charm.
/edit: I must add that they had a wonderful customer support back then -> the hardware chip interpreting the scroll wheel signal bugged after about three years usage, and after I notified them about it, they ... sent me a brand new mouse from the US as a replacement with an apology for the problem ! Cannot judge whether this is still valid nowadays, since I experienced no problem with the mouse since then, but this was truly unexpected for an item out of warranty time 
modified 17-Feb-22 5:32am.
|
|
|
|
|
You have my sympathy. I too have lost a lot of time/patience/hair to mice.
I have RSI and, from my experience, a good ambidextrous wireless mouse that is also not too expensive and durable is hard to find. I did not had any luck with that yet. My previous one did not last to the end of the warranty.
My solution, that I currently employ, is to have a mouse for all the fast work and a pen tablet for the precision work. And keep alternating between the two.
The mouse I use is a logitech mx master 3 (right hand only). I have it for a few months and haven't charged it since I bought it (November, I think). There is software to configure it in Linux if you need.
The pen tablet is a wired Wacom Bamboo Fun (CTE-650) but I think there were wireless versions back when I bought it (2007 maybe?!). Like the mouse, it has software to configure in Linux. Configuring the buttons on the tablet to zoom in/out makes life easier.
I can not say anything about the software for windows because I work only in Linux but it used to be good on windows 7 (for the pen tablet) and did not get on the way of work.
Regarding battery life, depending on what amount you refer to with "breaking the bank", there are wireless mice that have the charger in the mouse pad so, as long as the mouse is on top and almost centered on the mouse pad, it will charge even when you are using it. Probably you will not find one that is ambidextrous.
Good luck.
|
|
|
|
|
Fun thing happened today.
My mouse batteries just died!!
CI/CD = Continuous Impediment/Continuous Despair
|
|
|
|
|
Yeah, that must be fun! Doubly so when you have a deadline coming up
Mircea
|
|
|
|
|
|
I might try it. Thanks for the tip.
Mircea
|
|
|
|
|
Mircea Neacsu wrote: his is nothing like what I've expected. Biggest problem is the ridiculously short battery life: about a week on average and that's without the fancy RGB lightning.
Appears to be up to spec since this is exactly what the following says.
https://www.ign.com/articles/2019/08/19/corsair-harpoon-rgb-wireless-gaming-mouse[^]
I presume you stop using the mouse and computer at some point in the day. Why not just plug it in?
I use a wireless mouse that takes actual batteries. I change them once a year because I change the batteries in everything that often. Never had a problem. It is a M510 mouse from Logitech. I switch hands back and forth for the same reason you mentioned.
|
|
|
|
|
jschell wrote: Why not just plug it in?
Because I forget?  Because I need to keep another cable to clutter my desk?
jschell wrote: I switch hands back and forth
I switch mostly left to right 
I'll see myself out on the back door
Mircea
|
|
|
|
|
You just spent 40 minutes on a 4 minute read 
I'm sure we've all been there
|
|
|
|
|
I'm sorry, but I fell a sleep reading your post.
What was that again?
|
|
|
|
|
TL;DR
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
>,>
Real programmers use butterflies
|
|
|
|
|
"Boobies and a belly button"? 
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
bored emoji
at least i think that's what it is. I learned it through internet osmosis.
Real programmers use butterflies
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
