Re: OpenGL removing "objects" - how ? - Graphics Discussion Boards

OpenGL stencil in 2D - advanced (?) issues

Vaclav_10-May-20 5:32

10-May-20 5:32

I have run into a dead end in another OpenGL forum.
I have a basic understanding how (OpenGL) stencilling works.
My stencil is in 2D , no depths.
I am extracting a (circular) part of OpenGL objects, no problem.
I am trying to further manipulate the stencil result.
The task is to enlarge the result and move it to the center of the screen.
I used glTranslatef but it moves the original stencil, not the result. I want to move the result only.

I think my issue is that the stencil was build in "top of the modleview matrix" ( no push /pop) and the objects to be stencilled are in various matrix "stack" - used push / pop.

I understand the "result" is in color buffer, but it sure looks as I am manipulating the stencil buffer, which has been already disabled.

Am I correct in all this?
Do I have to rebuild all on SAME matrixview stack level ?
I am sorry if I am not using correct OpenGL terminology.
Cheers

OpenGL removing "objects" - how ?

Vaclav_9-Apr-20 9:53

Vaclav_

9-Apr-20 9:53

First - to avoid "confusion" - I am using term "object" to describe what is created in OpenGL in-between "new " and "end" loop code.
I have a "text (object)" rendered (in OpenGL window) , I need to delete such text and replace it with another one.
I do no want to translate , rotate etc. ... just delete and replace.

What I have tried so far ALWAYS writes OVER the existing text and makes a mess.

Is that possible in OpenGL?

I think I'll try (a hack ) - moving / translating current(text) matrix off the screen....

Open to other ideas.
Cheers

Re: OpenGL removing "objects" - how ?

Graham Breach9-Apr-20 21:22

Graham Breach

9-Apr-20 21:22

This is just a wild guess because I can't see your code - are you missing a call to glClear in your render loop?

Re: OpenGL removing "objects" - how ?

Vaclav_10-Apr-20 5:35

Vaclav_

10-Apr-20 5:35

As a general "rule" NOT to invite uncalled for criticism on my under construction code I am therefore very reluctant to post code.
However, every rule has an exception so here is the latest implementation of "write text message" to OpenGL window.
It writes the message, but in wrong position - irrelevant for now.
(The disabled #ifdef / #endif code was added and that is why the message is written in wrong raster position.The raster position code must be in wrong place. )
It is my understanding that OpenGL keeps the data - bitmap in this case - in video card hardware. So to override / update the data I have to access that particular hardware .
Or in another words - OpenGL "variable / object" cannot be just overwritten like C code.

So I believe I need to keep track of "matrix" where the initial bitmap is written and then

glLoadIdentity();

should clear the entire matrix.

Correct me if I am wrong, but glClear would not work SELECTIVELY , it would clear entire buffer.( I did neglected to add "selectively" to the post title )

C++

<pre>//display
// normal parametrized function
// passive
void OpenGL_text(char *message, float x, float y, float z) {

//#ifdef BYPASS
	printf("\nOPENGL TRACE OpenGL  @function %s  @line %i \n", __FUNCTION__,
	__LINE__);

	printf("\nOPENGL TRACE STOP passed message %s @line %i\n", message,
	__LINE__);
//#endif passive

	char menu[80];
	strcpy(menu, message); // local copy ??
	int len;
	len = strlen(menu);
	glColor3f(1, 1, 1);    // white text

//#ifdef BYPASS
	{ // GL_PROJECTION block
		glMatrixMode( GL_PROJECTION); // ??
		glPushMatrix();               // there is only one (?)
		glLoadIdentity();             // clear projection matrix  - why (?)

		gluOrtho2D(0, 500, 0, 500);   // MN !!
		{ // GL_MODELVIEW block
			glMatrixMode( GL_MODELVIEW);
			glPushMatrix();

			glLoadIdentity();         // clear bitmap (?)
//#endif
			glRasterPos3f(x, y, z); // wrong !! text start postion

			for (int i = 0; i < len; ++i) {
				glutBitmapCharacter(GLUT_BITMAP_HELVETICA_18, menu[i]);
			}
//#ifdef BYPASS
			glPopMatrix();        // GL_MODELVIEW
		} // GL_MODELVIEW block
		glMatrixMode( GL_PROJECTION);
		glPopMatrix();
	} // GL_PROJECTION block
	glMatrixMode( GL_MODELVIEW);
//#endif

}

Re: OpenGL removing "objects" - how ?

Graham Breach10-Apr-20 6:45

Graham Breach

10-Apr-20 6:45

Yes, glClear does clear the whole viewport - you would then redraw all of the content for the next frame. Matrices only affect what you are going to render in the future, not what you have already sent to be rendered.

SOLVED Re: OpenGL removing "objects" - how ?

Vaclav_10-Apr-20 7:08

Vaclav_

10-Apr-20 7:08

Since I just discover that push / pop matrix is "deprecated " clearing all maybe the only decent option anyway. Really not that hard since I keep system state...
Bottom line OpenGL was not the best choise for my application. O well...
Thanks

Re: OpenGL removing "objects" - how ?

jhonaa22-Mar-22 1:23

jhonaa

22-Mar-22 1:23

Here is the class ->

class bullet
{
   private:
   public:
     void update();
     bool check()
     {
        if(y>=box_len/2)
        {
        return true;
        }
        return false;
     }
     void draw();
};
vector <bullet*> bullets;


Here is the update function ->

void update(int value)
{
  for( typeof(bullets.begin()) it= bullets.begin(); it!= bullets.end();it++)
  {
    if((*it)!=NULL)
    {
      if(*it)->check())
      {
        delete *it;
        bullets.erase(it);
      }
    }
  }
  glutTimerFunc(10, update, 0);
}

Re: OpenGL removing "objects" - how ?

jhonaa22-Feb-22 1:04

jhonaa

22-Feb-22 1:04

Use bullets.erase(it);

graphviz - pinning individual graphic elements, i.e. forcing their placement?

kalberts26-Feb-20 12:30

kalberts

26-Feb-20 12:30

I am going to use graphviz to generate state flow charts (i.e. blobs representing states, arrows from one blob to another representing events/transtions) based on a transition table.

There are ways to give hints about the preferred placements, in rough terms, through the "rank" specification. That is not defining the placements, just one input parameter to the placement algorithm. Ideally, I would like to give the user a mechanism to drag one or more blobs to a different position, and then redo the layout but with this one blob pinned.

I do not have the time do decipher the placement algorithm from the source code Smile | :)

, so now I hope that either someone knows graphviz in great detail, or the placement algorithms: Is pinning of individual graphic elements at all compatible with the placement algorithm? If it is, can this be done in the dot input language to graphviz? Or in some other way?

Infographics

lopoivana27-Oct-19 23:19

lopoivana

27-Oct-19 23:19

I can not know which is the best free tool for create infographics.
I want to know about this. Please provide me
Best tool or site to create eye catching infographics

Re: Infographics

Richard MacCutchan27-Oct-19 23:20

Richard MacCutchan

27-Oct-19 23:20

See infographics - Google Search[^].

Create 2D graphics editor

Member 1455869629-Aug-19 0:51

Member 14558696

29-Aug-19 0:51

Hello,

I am trying to develop a 2D graphics editor on C#.
In that editor I want continuous co-ordinates where ever the mouse hovers.
I tried using Graphics class in C# but it uses the screen co-ordinates.
Instead I want to use world co-ordinates to draw different shapes.
(Some what like a Autocad Editor, but I don't want to include the complex functionalities)
How can I achieve that?

Re: Create 2D graphics editor

Richard MacCutchan29-Aug-19 2:33

Richard MacCutchan

29-Aug-19 2:33

Member 14558696 wrote:
How can I achieve that?

With a lot of hard work. And what do you mean by, "I want to use world co-ordinates to draw different shapes."? It does not matter what co-ordinate system you use, drawing a shape is much the same process.

Re: Create 2D graphics editor

Chandigarh Girl2-Sep-19 23:36

Chandigarh Girl

2-Sep-19 23:36

Nice

Re: Create 2D graphics editor

Regina Hawk1-Sep-19 23:47

Regina Hawk

1-Sep-19 23:47

Sorry can't reply on your question, but highly recommend you to think about 3d, not 2d. With the development of technology, virtual and augmented reality - 2d images are something that might be undemanding soon enough

Should a Web designer use coding or just PSD/XD Template

Member 1456898628-Aug-19 7:59

Member 14568986

28-Aug-19 7:59

I really need your help on this topic. I designing some PSD template websites and apps is this is the right web design or I have to code also? What responsive website means for a web designer is just create the same design for mobile, tablet... or the real meaning of the automatically changing weight for each screen?

And are we able to prototype our web page in Photoshop like the prototyping feature of Adobe XD?

Thanks!

opengl (openTK)

dspdad0107-May-19 9:55

dspdad010

7-May-19 9:55

Using OpenTK in devStudio 15 and windows forms on my dell desktop.
When I render a color (eg red = 255, 0, 0, 255), and read the results back it is about, but not quite half of the written value, eg 127, 0, 0, 127.

private void GetHitMap()
        {
            // copy hitmap from screen
            IntPtr unmanagedPointer = Marshal.AllocHGlobal(_hitMap.Length);
            GL.ReadBuffer(ReadBufferMode.Back);
            GL.ReadPixels(0, 0, renderCanvas.Width, renderCanvas.Height, PixelFormat.Rgba, PixelType.Byte, unmanagedPointer);
            Marshal.Copy(unmanagedPointer, _hitMap, 0, _hitMap.Length);
            Marshal.FreeHGlobal(unmanagedPointer);
        }

On a laptop, running the same code, same extremely simple shaders, but different gpu, the red is sometime red on the screen, and sometimes 'half red' and the values I read back are sometimes not exactly half,
Using a framebuffer in opengl instead of Marshalling gives the same results.
All other colors and using r,g,b or any combination gives the same result.
I was planning to use 'designated colors' to identify objects, similar to a shadow map, but the colors are not consistent.

Is this a known or expected behavior? Is it fixable? Running out of things to look for.

Re: opengl (openTK)

Gerry Schmitz7-May-19 11:22

Gerry Schmitz

7-May-19 11:22

Try pixel type unsigned byte.

"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal

Re: opengl (openTK)

dspdad0107-May-19 14:00

dspdad010

7-May-19 14:00

Using unsigned byte in the GL code works much better.
Thanks for the suggestion.
Still have to verify on the laptop if this solves all or only some of the issues.
I also tried copying to a bitmap :

using (Graphics g = Graphics.FromImage(bitmap))
            {
                g.CopyFromScreen(bounds2.Location, Point.Empty, bounds2.Size);
            }

which returns the 'right' values from 0..255.

OpenGL GLFW/SDL emdeded into WinForms/WPF

Member 1403803230-Oct-18 4:17

Member 14038032

30-Oct-18 4:17

Dears,

Hope all is fine.

Here, there is an article about Creating OpenGL Windows in WPF. But is it possible to embed a pure С++ OpenGL-GLFW or SDL based context into the WForms/WPF, which in its turn will provide controls on the GLFW-context and objects? In other words, WForms/WPF C# editor + C++ GLFW Context.

Thanks a lot.

How do I convert iTextSharp text to outline (vectorize)?

Jakob Farian Krarup6-Jun-18 19:38

Jakob Farian Krarup

6-Jun-18 19:38

I am generating a PDF for use in a lasercutter.
The printerdriver for the laser cutter takes vectors with a specific color and stroke-width, and uses them to cut all the way through the material. All rasters/bitmaps are just burnt into the surface of the material.
I would like to be able to take a piece of text and convert it to a vector outline.
I thought this would do it:

cb.BeginText()
cb.SetLineWidth(0.01f)
cb.SetColorStroke(BaseColor.RED)
cb.SetTextRenderingMode(PdfContentByte.TEXT_RENDER_MODE_STROKE)

But apparently the stroke generated is a raster and not a vector.
Any ideas?
I could also go from the metods in GDI+/System.Drawing if anyone knows how to do that.

Kind regards - Jakob

Re: How do I convert iTextSharp text to outline (vectorize)?

Jakob Farian Krarup8-Jun-18 2:05

Jakob Farian Krarup

8-Jun-18 2:05

Well, I've gone with this for now: GDI+ Path to PDF[^]
If anyone else has other methods, I'd still like to hear about them 👍

/Jake

Re: Graphics.FillPath( Brush, GraphicsPath ) does not fill a simple P

Eddy Vluggen29-May-18 23:57

Eddy Vluggen

29-May-18 23:57

Marked as spam; I see a URL, but not a question.

Bastard Programmer from Hell Suspicious | :suss:

If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.

64 bit .NET CatmullRom method?

primem0ver8-Feb-18 7:35

primem0ver

8-Feb-18 7:35

I have need to use the Vector2.CatmullRom(...) method in a memory intensive program that currently produces extremely large pictures for testing purposes. I found the ability to do this on the XNA platform. Before adding this reference, I was able to create the pictures I need. Unfortunately, since I now have to compile a 32 bit runtime as that seems to be the only format for the XNA library, I do not have enough memory available to complete the task(s) necessary.

IS there a 64 bit version of this method in this or another library? I need the ability to turn blocky cardinal direction lines into smooth lines with easy slopes (which is why I am using this function).

c++ directx9 center background

Korowai12-Nov-17 7:40

Korowai

12-Nov-17 7:40

Hello,

i am trying to code some graphics for a little game in c++ and winapi / directx9.

I have established a background as a surface. Then i put some sprites on the background.

The problem is, as i call a function that has to center the screen on the active sprite, it doesn't show the background.

Here is the code so far, if you miss an information, please ask and i will answer.

First, the part of main, that is called, when user pushes button (winapi)

C++

<pre>case ID_ZENTRIEREN:
            {
                for (int x=0;x<4;x++)
                    if (Spieler[x].Rundenaktiv==true)
                {
                    Spielx=Spieler[x].posx;
                    Spiely=Spieler[x].posy;
                    d3ddev->Clear(0,NULL,D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, D3DCOLOR_COLORVALUE(0.0f,0.0f,0.0f,1.0f), 1.0f, 0);
                    render_frame_center(hDlg1, Worldposx, Worldposy, Bildschirmbreite, Bildschirmhoehe, Spielx, Spiely);
                    if (Spieler[x].Mobilart==0) //Schuerfer
                        {
                            float Mobilposx, Mobilposy;
                            Mobilposx=Spieler[x].posx;
                            Mobilposy=Spieler[x].posy;
                            render_Schuerfer(oWorldposx, oWorldposy, Mobilposx, Mobilposy);
                        }
                        else if (Spieler[x].Mobilart==1) //Frachter
                        {
                            float Mobilposx, Mobilposy;
                            Mobilposx=Spieler[x].posx;
                            Mobilposy=Spieler[x].posy;
                            render_Frachter(oWorldposx, oWorldposy, Mobilposx, Mobilposy);
                        }
                        else if (Spieler[x].Mobilart==2) //Flugwaechter
                        {
                            float Mobilposx, Mobilposy;
                            Mobilposx=Spieler[x].posx;
                            Mobilposy=Spieler[x].posy;
                            render_Flugwaechter(oWorldposx, oWorldposy, Mobilposx, Mobilposy);
                        }
                        else if (Spieler[x].Mobilart==3) //Jaeger
                        {
                            float Mobilposx, Mobilposy;
                            Mobilposx=Spieler[x].posx;
                            Mobilposy=Spieler[x].posy;
                            render_Jaeger(oWorldposx, oWorldposy, Mobilposx, Mobilposy);
                        }

                    render_ZeichenaktivesMobil(Spielx, Spiely, oWorldposx, oWorldposy);
                    render_frame_center(hDlg1, Worldposx, Worldposy, Bildschirmbreite, Bildschirmhoehe, Spielx, Spiely);
                    d3ddev->Present(NULL,NULL,NULL,NULL);

                }
            }
            break;

As next, the function that should center the background:

C++

<pre>void render_frame_center(HWND hDlg1, float &Worldposx, float &Worldposy, float &Bildschirmbreite, float &Bildschirmhoehe, float &Spielx, float &Spiely)
{
    RECT screenRect;
    GetClientRect(GetDlgItem(hDlg1, ID_KARTE),&screenRect);
    RECT drawRect;
    // Spieler im Feld
if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=Spiely+(screenRect.top-screenRect.bottom)/2;
    drawRect.left=Spielx-(screenRect.right-screenRect.left)/2;
    drawRect.right=Spielx+(screenRect.right-screenRect.left)/2;
    drawRect.bottom=Spiely+(screenRect.top-screenRect.bottom)/2;
    }
    //links
else if (Spielx<(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
{
    drawRect.top=Spiely+(screenRect.top-screenRect.bottom)/2;
    drawRect.left=0;
    drawRect.right=0+(screenRect.right-screenRect.left);
    drawRect.bottom=Spiely+(screenRect.top-screenRect.bottom)/2;
}
//rechts
else if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx>1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=Spiely+(screenRect.top-screenRect.bottom)/2;
    drawRect.left=1600-(screenRect.right-screenRect.left);
    drawRect.right=1600;
    drawRect.bottom=Spiely+(screenRect.top-screenRect.bottom)/2;
    }
    //oben
else if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely<(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=0;
    drawRect.left=Spielx-(screenRect.right-screenRect.left)/2;
    drawRect.right=Spielx+(screenRect.right-screenRect.left)/2;
    drawRect.bottom=0+(screenRect.top-screenRect.bottom);
    }
    //unten
else if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely>1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=1200-(screenRect.top-screenRect.bottom);
    drawRect.left=Spielx-(screenRect.right-screenRect.left)/2;
    drawRect.right=Spielx+(screenRect.right-screenRect.left)/2;
    drawRect.bottom=1200;
    }
    // oben links
else if (Spielx<(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely<(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=0;
    drawRect.left=0;
    drawRect.right=0+(screenRect.right-screenRect.left);
    drawRect.bottom=0+(screenRect.top-screenRect.bottom);
    }
   // oben rechts
else if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx>1600-(screenRect.right-screenRect.left)/2&&
    Spiely<(screenRect.bottom-screenRect.top)/2&&
    Spiely<1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=0;
    drawRect.left=1600-(screenRect.right-screenRect.left);
    drawRect.right=1600;
    drawRect.bottom=0+(screenRect.top-screenRect.bottom);
    }
    //unten links
else if (Spielx<(screenRect.right-screenRect.left)/2&&
    Spielx<1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely>1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=1200-(screenRect.top-screenRect.bottom);
    drawRect.left=0;
    drawRect.right=0+(screenRect.right-screenRect.left);
    drawRect.bottom=1200;
    }
    //unten rechts
else if (Spielx>(screenRect.right-screenRect.left)/2&&
    Spielx>1600-(screenRect.right-screenRect.left)/2&&
    Spiely>(screenRect.bottom-screenRect.top)/2&&
    Spiely>1200-(screenRect.bottom-screenRect.top)/2)
    {
    drawRect.top=1200-(screenRect.top-screenRect.bottom);
    drawRect.left=1600-(screenRect.right-screenRect.left);
    drawRect.right=1600;
    drawRect.bottom=1200;
    }


    d3ddev->BeginScene();

	d3ddev->GetBackBuffer(0,0,D3DBACKBUFFER_TYPE_MONO, &backbuffer);
    d3ddev->StretchRect(Hintergrund, &drawRect, backbuffer, NULL, D3DTEXF_NONE);

    d3ddev->EndScene();

}

Here is the init for directx

C++

<pre>void initD3D(HWND hDlg1, HWND hwndRaumkarte, float &Bildschirmbreite, float &Bildschirmhoehe)
{

    HRESULT hresult;


    d3d=Direct3DCreate9(D3D_SDK_VERSION);
    D3DDISPLAYMODE d3ddm;
    d3d->GetAdapterDisplayMode( D3DADAPTER_DEFAULT, &d3ddm );
    D3DPRESENT_PARAMETERS d3dpp;
    ZeroMemory(&d3dpp, sizeof(d3dpp));
    d3dpp.Windowed=TRUE;
    d3dpp.SwapEffect=D3DSWAPEFFECT_DISCARD;
    d3dpp.hDeviceWindow=hwndRaumkarte;
    d3dpp.BackBufferFormat       = d3ddm.Format;
    d3dpp.EnableAutoDepthStencil = TRUE;
    d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
    d3dpp.PresentationInterval   = D3DPRESENT_INTERVAL_IMMEDIATE;
    d3dpp.BackBufferCount=1;
    d3dpp.BackBufferFormat=D3DFMT_X8R8G8B8;
    d3dpp.BackBufferWidth=800;
    d3dpp.BackBufferHeight=600;

    d3d->CreateDevice(D3DADAPTER_DEFAULT,
                      D3DDEVTYPE_HAL,
                      hwndRaumkarte,
                      D3DCREATE_SOFTWARE_VERTEXPROCESSING,
                      &d3dpp,
                      &d3ddev);

   // d3ddev->StretchRect(pScr, &screenRect, pDst, NULL, D3DTEXF_LINEAR);
    d3ddev->CreateVertexBuffer( 4*sizeof(Vertex), D3DUSAGE_WRITEONLY,
                                      D3DFVF_CUSTOMVERTEX, D3DPOOL_DEFAULT,
                                      &g_pVertexBuffer, NULL );
    void *pVertices = NULL;
    g_pVertexBuffer->Lock( 0, sizeof(g_quadVertices), (void**)&pVertices, 0 );
    memcpy( pVertices, g_quadVertices, sizeof(g_quadVertices) );
    g_pVertexBuffer->Unlock();


    D3DXMatrixPerspectiveFovLH( &Spritematrix, D3DXToRadian( Kamerawinkel ),
                                800 / 600, 0.00f, 100.0f );

    d3ddev->SetTransform( D3DTS_PROJECTION, &Spritematrix );
	d3ddev->SetSamplerState(0, D3DSAMP_MINFILTER, D3DTEXF_LINEAR);
	d3ddev->SetSamplerState(0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR);
	d3ddev->SetSamplerState(0, D3DSAMP_MIPFILTER, D3DTEXF_LINEAR);
	d3ddev->SetRenderState(D3DRS_LIGHTING, FALSE);

	d3ddev->SetTransform(D3DTS_WORLD, &Spritematrix);


	d3ddev->SetTextureStageState( 0, D3DTSS_TEXTURETRANSFORMFLAGS,
                                 D3DTTFF_DISABLE );


    d3ddev->Clear(0,NULL, D3DCLEAR_TARGET, D3DCOLOR_XRGB(0,0,0),1.0f,0);

    d3ddev->GetBackBuffer(0,0,D3DBACKBUFFER_TYPE_MONO, &backbuffer);

    hresult= d3ddev->CreateOffscreenPlainSurface(1600,1200,D3DFMT_X8R8G8B8,D3DPOOL_DEFAULT, &Hintergrund, NULL);


    if (hresult !=D3D_OK)
        return;
}

Further information:
the surface has 800/600, but will be presented as 1600/1200.
int Spielx, Spielx==coordinates of the ship/ sprite

It would be great if someone helps me, because i didn't find a hint in my books or in web.

Last Visit: 31-Dec-99 18:00 Last Update: 27-Apr-24 14:49

Refresh

ᐊ Prev 123 4 5 6 7 8 9 10 11 Next ᐅ

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.