|
Absolutely nothing, OBD2 is a severely cut diagnostic protocol that exposes very little informations and allows little to no configuration.*
Basically you can read the DTC (Diagnostic Trouble Codes), with the correct key and protocol you can erase them, check the emissions from the various air sensors and see some publicly available informations. All the rest is hidden behind a security gateway and or the BCM (Body Computer Module).
* Unless the car is more than 10 years old, in that case you might be more lucky (or unlucky, depending on the point of view).
GCS/GE d--(d) s-/+ a C+++ U+++ P-- L+@ E-- W+++ N+ o+ K- w+++ O? M-- V? PS+ PE Y+ PGP t+ 5? X R+++ tv-- b+(+++) DI+++ D++ G e++ h--- r+++ y+++* Weapons extension: ma- k++ F+2 X
|
|
|
|
|
den2k88 wrote: Absolutely nothing, OBD2 is a severely cut diagnostic protocol that exposes very little informations and allows little to no configuration.*
I'm guessing the hacks that were being demonstrated a few years ago (remotely turning the wipers on/off, playing around with the radio volume, heat/AC, cutting off the gas pedal, etc) is NOT done through that interface then. 'cuz whatever was supposed to be isolating those functions was definitely not doing a very good job of it.
|
|
|
|
|
It wasn't. It waqs done through a poor implementation from C******r of the infotainment system and the absence at that time of the SGW (Security Gateway).
Some Very Intelligent Person decided that on the NAFTA version of that model the infotainment system should have been connected straight to the CAN-1, the same where Body Computer and Engine Computer are connected. The connectivity module was easily spoofable and connected straight up to the CAN line, allowing attackers to send arbitrary CAN messages on every connected line.
CAN messages are broadcast, have no destination only a source and the ID determines who will react to that message and its priority. Meaning if the brake pedal transmits on CAN with the message ID 0xBADBEEF and some attacker gets access to the CAN through the radio they can send the same 0xBADBEEF and trigger a brake response from the brake ECU. That goes for every ECU connected on that line.
The EMEA model had the infotainment on CAN C, which carried nothing of import whatsoever.
GCS/GE d--(d) s-/+ a C+++ U+++ P-- L+@ E-- W+++ N+ o+ K- w+++ O? M-- V? PS+ PE Y+ PGP t+ 5? X R+++ tv-- b+(+++) DI+++ D++ G e++ h--- r+++ y+++* Weapons extension: ma- k++ F+2 X
|
|
|
|
|
honey the codewitch wrote: I've seen ECU simulators out there but they are about $500 or more.
IOW, the cost of a tank of petrol, these days. 
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
|
Hmm. Does turning the ignition key just to "Accessories", or whatever they call it that lets you open/close windows and operate the sound system, help?
Software Zen: delete this;
|
|
|
|
|
It might allow me to do some of the functions, but if I wanted to make stuff like a digital speedometer it requires me to have the car running I think.
To err is human. Fortune favors the monsters.
|
|
|
|
|
I'm stocking popcorns and beers for a few weeks. It will be entertaining to see you bang your head against the asininity and layers of closed source, closed documents and paywalls in the car industry.
GCS/GE d--(d) s-/+ a C+++ U+++ P-- L+@ E-- W+++ N+ o+ K- w+++ O? M-- V? PS+ PE Y+ PGP t+ 5? X R+++ tv-- b+(+++) DI+++ D++ G e++ h--- r+++ y+++* Weapons extension: ma- k++ F+2 X
|
|
|
|
|
This probably varies from car to car. For example, my wife's older car has two processor modules, one in the engine compartment and the other in the dashboard. Fortunately they're identical except for an EPROM in a socket (it's a '96). A few years ago the dashboard module failed, and the dealer wanted $800 for a replacement. My car guy bought an engine module from a salvage yard, swapped EPROM's, and Bob's your uncle.
Software Zen: delete this;
|
|
|
|
|
I *think* I can do it from the car's ODB2 port but I don't know for sure. Like everything I do, in order to learn something I dive right in, and RTFM maybe after the fact. 
To err is human. Fortune favors the monsters.
|
|
|
|
|
Every single model awnd variant has its own CAN mapping and message IDs. You'd need the DBC (CAN message database, with IDs, senders and bitfield definition for each signal) and to know on which line the message you are looking for is transmitted. Those are available... to Tier 1 and OEMs. Normal people can find them with a eyepatch and a parrot but it became harder with time as OEMs (the only real owners of the DBC) became much more savy to whom they distribute them to.
GCS/GE d--(d) s-/+ a C+++ U+++ P-- L+@ E-- W+++ N+ o+ K- w+++ O? M-- V? PS+ PE Y+ PGP t+ 5? X R+++ tv-- b+(+++) DI+++ D++ G e++ h--- r+++ y+++* Weapons extension: ma- k++ F+2 X
|
|
|
|
|
Sounds like fun!
*cracks knuckles*
I may get nowhere, but it's fun to try.
To err is human. Fortune favors the monsters.
|
|
|
|
|
Ah ... ![Java | [Coffee]](https://www.codeproject.com/script/Forums/Images/coffee.gif) , the Magic Black Liquid!
My bean to cup machine died on Friday - the piston o-ring snapped so it no longer sealed pressurised water inside. But the new seals arrived from Germany today and it makes coffee again!
Fortunately I had some of my older cafetiere coffee to hand, so I wasn't caffeine free, but it was a close thing: it was quite old, and tasted it. 
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
My sincere condoleances
|
|
|
|
|
Machines for making coffee.. 
You boil water, pour it over your filter, repeat, done. Coffee. Costs about a 3 euro to get a filter-holder. Great coffee everywhere where there's electricity.
Bastard Programmer from Hell 
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Don't forget that you need a grinder as well. If you love coffee, you never use pre-ground beans!
On the other hand: "Great coffee everywhere where there's electricity" - it works even with a campfire out in the forest! (as long as you have a manual, not electric, grinder - and of course you have that!)
In several Norwegian folk museums, the guide may show a device, asking the audience what they think it is for. If there is any suggestion at all, it is usually 'A kettle for making popcorn'. (The device is probably a hundred years older than the first popcorn in Norway!) But it is a kettle for roasting coffee beans. Hundred years ago, buying un-roasted coffee beans at the supermarket was quite common, so you could roast it to your own taste, usually on a wood stove. I never saw unroasted coffee in the food stores in my lifetime, and the only place to find a roasting kettle would be to steal one from a museum 
Maybe green coffee and roasters are commonly available in other countries. If you really want to live an independent life, and make stuff suit your taste, you really should start roasting your own coffee. Maybe you should even try to grow your own coffee beans. Norwegian climate forbids that, but further south you might be able to take them all the way from seeds, to plants to berries to roasted and ground beans. I guess that you can do most of it by hand, using no sort of machinery.
|
|
|
|
|
My grandma did that.
Then when I was a kid the supermarket on wheels started arriving at her farm, and she could buy pre roasted coffee, that was the best thing ever in her opinion.
My grandpa thought it was to expensive...
|
|
|
|
|
That somehow reminds me of "Emil of Lonneberga". Probably because I know nothing about Sweden.
There is only one Vera Farmiga and Salma Hayek is her prophet!
Advertise here – minimum three posts per day are guaranteed.
|
|
|
|
|
trønderen wrote: Don't forget that you need a grinder as well. If you love coffee, you never use pre-ground beans!
Extremism I don't do. Preground works, and all I need is hot water and I'm happy. I'm not a connoisseur, I just grew up with coffee. My parents did it in the bottle with lots of milk.
trønderen wrote: On the other hand: "Great coffee everywhere where there's electricity" - it works even with a campfire out in the forest! (as long as you have a manual, not electric, grinder - and of course you have that!)
A manual? You boil water, you pour it over the ground coffee. I'm teaching a six year old, 3 spoons of powder and boiling and dangerous water.
trønderen wrote: I never saw unroasted coffee in the food stores in my lifetime, and the only place to find a roasting kettle would be to steal one from a museum 
It was done out of need; now roasting your beans is just being pretentious. Can you heat an oven to the perfect temperature at the same price level as mass produced vacuum sealed preground beans?
I just want some bloody coffee in the morning. Think I roast and ground? I need coffee in 5 minutes. Just an addict, no fine coffee tastings here
Bastard Programmer from Hell
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Eddy Vluggen wrote: It was done out of need; now roasting your beans is just being pretentious.
One man's 'need' is another man's pleasure . One guy I know went on a trip from Norway to the Netherlands just to buy the proper ingredients to mix his own ink. He does all his calligraphy - and that amounts to 90% of all his writing - using real goose feathers. His writing is pure artwork. But of course: He doesn't 'need' to do it that way ...
I certainly wouldn't call myself a 'connoisseur' by any standard, but there is a long line from 'not caring at all what it tastes like' to 'connoisseur' level. I am fully aware that freshly ground beans make a significantly richer aroma than pre-ground - so much that it certainly is worth the effort. (And by the way: I was referring to a manual grinder, as opposed to an electric one, not a manual for making coffee!)Eddy Vluggen wrote: Just an addict, no fine coffee tastings here
Fair enough. I've got friends having the same attitude towards moonshine.
|
|
|
|
|
trønderen wrote: One man's 'need' is another man's pleasure . One guy I know went on a trip from Norway to the Netherlands just to buy the proper ingredients to mix his own ink. He does all his calligraphy - and that amounts to 90% of all his writing - using real goose feathers. His writing is pure artwork. But of course: He doesn't 'need' to do it that way ...
Most of us write as we do drink coffee; we not artists.
trønderen wrote: but there is a long line from 'not caring at all what it tastes like' to 'connoisseur' level.
Oh, I work in IT, did I tell you that? I'm familiar with quite a bunch of machines that present 'coffee' in one form or another.
trønderen wrote: so much that it certainly is worth the effort.
Here I disagree. My first was at three years, and I do not go any day without.
There's good coffee, there's bad. I do not roast my beans and still have ground powder that is saved in a CO2 seal after being perfectly burned.
Bastard Programmer from Hell
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Some weeks ago our Quooker (boiling water tap) died and we were desperate, now we had to put the kettle on to make a cup of tea!
They refused to send someone to repair it, so I had to do it myself with a replacement tap they sent us 
Although only replacing the tap was a seemingly simple operation, things were complicated by the placement of the nut behind the sink.
Could not see a thing, and although I'm not religeous I was on my knees in a praying like pose for more than two hours.
Got it working luckily ...
|
|
|
|
|
There is a special spanner for those nuts - it's called a "tap spanner" or "basin wrench":Silverline CB40 Adjustable Basin Wrench 280 mm : Amazon.co.uk: DIY & Tools[^]
Every time I need it, I'm so glad I got one!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Doesn't look like any kind of tool I've seen before...I can't imagine how it would work.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
If you go to a hardware store and locate one, it'll be pretty obvious if you pretend your finger is a nut.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
If it takes you two hours to replace a tap, you are probably better off calling a plumber (or a handyman) to do the job. They have the tools to do it properly, and will do it in ten minutes. Don't forget that your time is also worth something!
Those of us with ten thumbs (like yours truly  ) don't really have a choice.
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
