Where can I find MCAD info? - Work Issues Discussion Boards

First Prev Next

Re: Extreme Programmers with C# experience needed

Extremely Confused21-Aug-04 17:10

Extremely Confused

21-Aug-04 17:10

bgcamps wrote:
A company in Cleveland, OH is looking for degreed Extreme Programmers with strong C# and OOD skills.

Please clarify, do you want extremely good C# programmers or extremely bad ones? If you need both, then count me in. Poke tongue | ;-P

Re: Extreme Programmers with C# experience needed

rotu27-Aug-04 1:56

rotu

27-Aug-04 1:56

I think he meant someone with a college degree and who knows Extreme Programming. Extreme programming is a method of coding.

mcsd

rerereerer10-Aug-04 1:25

rerereerer

10-Aug-04 1:25

hi ,
i want to obtain mcsd certification in vc++ . can you suggest me with the exams i have to take . any help would be much appreciated . thanks in advance.
regards,
vinod

Re: mcsd

RB@Emphasys10-Aug-04 9:30

RB@Emphasys

10-Aug-04 9:30

http://www.microsoft.com/learning/mcp/mcsd/requirementsdotnet.asp

Re: mcsd

rerereerer10-Aug-04 22:56

rerereerer

10-Aug-04 22:56

thanks ryan , i had been to that site but i could not find much information on visual c++ certification . all it says is about visual basic.net and visual c# . net . i am very much intrested in vc++ certification and i was wondering is there any certification for vc++ after 6.0 . any help would be much appreciated . thanks in advance .

regards,
vinod

Re: mcsd

RB@Emphasys12-Aug-04 10:13

RB@Emphasys

12-Aug-04 10:13

Unfortunately it doesn't look like they currently offer the .NET exams in c++. You would have to revert back to 6.0. If you enjoy the syntax and general c++ style, I would recommend the c# exams, they should be more to you're liking.

Ryan

Re: mcsd

vipul_vips20-Aug-04 13:47

vipul_vips

20-Aug-04 13:47

Hi Vinod,

I believe that the MCSD (not MCSD.NET) in C++ track is being made obsolete. So you will have to wait for VC++.NET certifications (yet to be announced) or switch over to C# or VB.NET.

Regards
Vipul (MVP)

MVP, MCAD

Where can I find MCAD info?

V.9-Aug-04 0:00

9-Aug-04 0:00

Hi,

I'm studying for my first exam for MCAD. I's self-study and I'm using the microsoft self-paced training kit. I have the transcender exams.

I cannot find any descent info however on the internet. Yes, sure what are the exams and stuff is easy to find, but I'm looking more in the line of: what should you be aware of, how much (%) do you need to pass the exam. What is the avarage amount of time needed to study for an exam. and so on.
(My experience is avarage. I'm a C++ developer, but have some Java, JSP, ASP, ASP.NET, HTML, XML, ... experience)

any links, info is welcome.
tnx for your time.

"If I don't see you in this world, I'll see you in the next one... and don't be late." ~ Jimi Hendrix

Re: Where can I find MCAD info?

RB@Emphasys10-Aug-04 9:32

RB@Emphasys

10-Aug-04 9:32

Hey V,

If you go to this link, and click on any individual exam, it has a fairly specific break down of exactly what to study at the bottom of the page.

http://www.microsoft.com/learning/mcp/mcsd/requirementsdotnet.asp

Re: Where can I find MCAD info?

V.10-Aug-04 23:02

10-Aug-04 23:02

tnx man,

I didn't see this site yet, so it's quite usefull Big Grin | :-D

"If I don't see you in this world, I'll see you in the next one... and don't be late." ~ Jimi Hendrix

C/C++ Certification

M Ashok Kumar4-Aug-04 21:35

M Ashok Kumar

4-Aug-04 21:35

Hi,

I wanted to go for some certification on C and C++. Recently I have cleared the BrainBench certifications. Can you suggest me if some other certification is available for C/C++. It will be better if I can write it free of cost.

Thanks,
Ashok

Re: C/C++ Certification

RB@Emphasys12-Aug-04 10:15

RB@Emphasys

12-Aug-04 10:15

You can achieve the Microsoft MCSD through Visual C++, well atleast the 6.0 version of it. Unfortunately, it is not cost free, most exams are about a 150 bucks a piece.

Ryan

getcontext implementation

kokabgujjar19-Jul-04 23:14

kokabgujjar

19-Jul-04 23:14

I am working on process context in linux. I am using 2.4.7-10 ver of Linux. I have searched /lib/modules/2.4.7-10 folder of source code but i could not find the complete implementation of getcontext function. From where I can get it?

KOKAB WAQAS

Re: getcontext implementation

RB@Emphasys10-Aug-04 9:36

RB@Emphasys

10-Aug-04 9:36

Hey Kokab,

You're really posting these programming questions in the wrong forum. I would try one of the development related forums, but you might be better off looking for a java or linuix forum, although im not sure what language you're using.

Ryan

Re: getcontext implementation

kokabgujjar11-Aug-04 21:14

kokabgujjar

11-Aug-04 21:14

If u didn't have any answer don't waste others time for reading your reply.
Next time you should not act this kind of behaviour. It's not your problem that is I find my answer or not.OK.

Re: getcontext implementation

RB@Emphasys16-Aug-04 2:54

RB@Emphasys

16-Aug-04 2:54

LOL, well, going along those same lines of reasoning, you shouldn't post your question in here so everyone who might take that well, second, that it takes to read the title of this forum, won't have to waste their time with your misplaced post.

How we print registers

kokabgujjar19-Jul-04 23:09

kokabgujjar

19-Jul-04 23:09

I am trying to access registers using C in linux
I am using Linux ver 2.4.7-10.

the code is as following

#include <ucontext.h><br />
#include<stdio.h><br />
<br />
#define REG mn.uc_mcontext.gregs<br />
char *reg[]={"GS", "FS", "ES", "DS","EDI", "ESI", "EBP", "ESP", "EBX", "EDX", "ECX","EAX", "TRAPNO", "ERR", "EIP", "CS", "EFL", "UES<br />
P", "SS"};<br />
<br />
int abc(void);<br />
<br />
main()<br />
{<br />
ucontext_t mn;<br />
int i;<br />
i = abc();<br />
        getcontext(&mn);<br />
<br />
printf("INT size = %d\n", sizeof(int));<br />
for(i=0;i<19;i++)<br />
        printf("%s = 0X%X\n", reg[i], REG[REG_GS]);<br />
<br />
printf("Address of main is =%X\n", main);<br />
<br />
}<br />
int abc(void)<br />
{<br />
<br />
return 1;<br />
}

the results are

GS = 0X400361E4<br />
FS = 0X0<br />
ES = 0X3<br />
DS = 0XBFFFF970<br />
EDI = 0XBFFFFAA4<br />
ESI = 0X400168E4<br />
EBP = 0XBFFFFA38<br />
ESP = 0XBFFFF8B0<br />
EBX = 0X40169154<br />
EDX = 0XBFFFFAAC<br />
ECX = 0X0<br />
EAX = 0X0<br />
TRAPNO = 0X4003E514<br />
ERR = 0X400361E4<br />
EIP = 0X80484D5<br />
CS = 0X3<br />
EFL = 0X40032268<br />
UESP = 0X1<br />
SS = 0X8048180

how i can verify is it corret result?

KOKAB WAQAS

Reading Data from one Jar from another jar file

Nalamati8-Jul-04 22:15

Nalamati

8-Jul-04 22:15

Hi,
I have a problem. I want to read the data that is being read by one JAR file from another JAR file, without distrubing the first jar file.
To be very Precise, A.JAR file running independently and reading data from a data base. I would like to read this data using another JAR file. Say B.JAR. If some one can provide a solution, with sample jar's it is a great help.

Re: Reading Data from one Jar from another jar file

RB@Emphasys10-Aug-04 9:39

RB@Emphasys

10-Aug-04 9:39

Wrong forum boss.

Working with Rexec

sivart14448-Jul-04 13:03

sivart1444

8-Jul-04 13:03

hi,
I'm working with Rexec in visual C++. I don't know any C++ so the going is slow. My task was to change the service, edit security so only certain ip's could remote execute. I succeded but, it only works in the debug mode used when -d is passed instead of -i and then allowing it to interact with the desktop. So when running as a Service it no longer does anything. I open a file and read data from it for the security addition and i'm wondering if that is the reason it doesn't work. can services do file manipulation? Any help is much appreciated, advice also welcomed because i'm a newb.

here is the code i added, it shouldn't have an affect anywhere else:
CAsyncSocket SrvSock;
SrvSock.Create(9987);
SrvSock.Listen();
CAsyncSocket CliSock;
// struct sockaddr addr;
struct sockaddr_in from;

//putting all hosts.txt values in an array for faster more effecient check

int count = 0;
int i = 0;
string ip;
string ipArray[MAX_IP];
ifstream openFile("hosts.txt");
while(openFile.peek() != EOF)
{
openFile >> ip;
openFile.ignore(255, '\n');
ipArray[count] = ip;
count++;
}
printf("array initialized with %d values\n", count);
openFile.close();

int nSize = sizeof(SOCKADDR);
// Loop to maintain the search while the application is running.
while (!m_pStop->Lock(0))
{
// Check to see if a connection is being attempted.
if(SrvSock.Accept(CliSock, (struct sockaddr*)&from, &nSize))
{

printf("Remote Address %s \n", inet_ntoa(from.sin_addr));//andrew: to print ip

SOCKET hSock = CliSock.m_hSocket;
CliSock.Detach();

while(ip != "")
{
ip = ipArray[i];

if(inet_ntoa(from.sin_addr) == ip) //.compare(ip) == 0)
{
printf("MATCH Verified\nACCESS GRANTED!\n\n");
//Let a seperate thread handle the individual connections:
AfxBeginThread(ProcConnectionFunc, (LPVOID)hSock);
i = 0;
break;
}
if(ipArray[i+1] == "")
{
printf("Verification Failed\nACCESS DENIED!\n");
ip = "";
i = 0;
}
i++;
}
ip = " ";

// openFile.close();
}
Sleep(1);
}
// Clean up...
SrvSock.Close();
}

Re: Working with Rexec

RB@Emphasys10-Aug-04 9:41

RB@Emphasys

10-Aug-04 9:41

I would try reposting this in the c++ forum, this isnt really the correct place for those types of questions.
http://www.codeproject.com/script/comments/forums.asp?forumid=1647

Ryan

MCAD/MCSD

tanstaafl282-Jul-04 11:56

tanstaafl28

2-Jul-04 11:56

I was wondering if anyone knew, is there something preventing a person from getting MCAD, and then taking the additional test(s)necessary to get MCSD?

In other words, can I take the tests required to get MCAD and then apply those tests towards getting MCSD?

Still coaxing software out of the can after all these years...

Re: MCAD/MCSD

Steve Maier2-Jul-04 12:22

Steve Maier

2-Jul-04 12:22

Actually that is what you do. I have my MCAD now and I am one exam from getting my MCSD (.Net).

Steve Maier, MCSD MCAD

Re: MCAD/MCSD

RB@Emphasys30-Jul-04 8:01

RB@Emphasys

30-Jul-04 8:01

Hey Steve,

I passed exam 70-316 a couple of weeks ago, and im preparing to take exam 70-315. There seems to be alot of shared knowledge between the two exams. Are there alot of html based exam questions for 70-315? Just curious,

Thanks,
Ryan

Re: MCAD/MCSD

Steve Maier30-Jul-04 16:52

Steve Maier

30-Jul-04 16:52

There is alot of shared knowledge, you are right. But you have to think about things from the web forms point of view not the windows forms. So there are some differences too. There should be quite abit of database info there, but that is on 316 too. Maybe abit more on 315. Of course there are questions on configuring the web application (web.config). Also know your debugging.

Of course all of this is info that you can find in the MS page on the exam, but I am just re-affirming what is there.

Steve Maier, MCSD MCAD

Last Visit: 31-Dec-99 18:00 Last Update: 20-Jun-24 12:16

Refresh

ᐊ Prev 1...74 75 76 777879 80 81 82 83 Next ᐅ

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.