|
Hello
I have been tryin to customize the Code appear for iEtoolbar
www.codeproject.com/csharp/dotnetbandobjects.asp
Instead of Click,I am willing to Implement DocumentComplete Event,guide me please
Thanks
|
|
|
|
|
If you have questions about a particular article, ask at the bottom of the article in the article message board: that's what it's there for. This forum is for C#-related and typically general .NET questions 1) not related to a specific article, 2) not related to a specific product or library, and 3) isn't about ASP.NET (there is a forum more specific to that topic here on CodeProject).
There are answers to that question already. In fact, the first question is what you want and I went ahead and posted a reply. Be sure to read it. If you don't understand, don't come back here; continue the thread in the article's message board.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
I am sorry,you are right,infact i had to post there but did here without noticing the rules
but it could be good if you gave the link of the post you made on that article..
right now i am searching it in archieve..
Thanks
|
|
|
|
|
|
Not sure if this is in the correct forum or not.. but I had to rant
Does anyone else HATE writing reports that MUST be printable?
Life would be so much easier if our Admin would let us use
SqlServer Reporting Services or Crystal Reports... but nooo
ok.. sorry had to get that out
Will
|
|
|
|
|
> Not sure if this is in the correct forum
The soapbox dude. 
If your admin has an issue with Crystal Report running over the network you can run it on the local machine.
Alex Korchemniy
|
|
|
|
|
|
OMalleyW wrote:
Life would be so much easier if our Admin would let us use
SqlServer Reporting Services or Crystal Reports... but nooo
Sounds like you need a new Admin. 
In this situation. I'd cost up the project costs of developing reports without SQL RS or Crystal Reports and cost up developing with reporting software. Then go above the admins head and talk to somebody who can make a better choice.
Michael
CP Blog [^]
|
|
|
|
|
Hello friends
I am newbie in C#,been working on it for few weeks and very excited after working on it,things ve become easier with it which were difficult in past(coding in VC++)
i want to ask that is there anyway to use MSN API for the development of MSN Plugin?any help regarding that? beside this is it possible to customize "TOAST"?
Thanks
|
|
|
|
|
kadnan wrote:
i want to ask that is there anyway to use MSN API for the development of MSN Plugin?
If you simply want to hook into MSN Messenger, you can use tlbimp.exe[^] to generate an interop assembly which will give you access to their exposed classes and interfaces to program against. Are you looking to attach your "plugin" into the MSN Messenger client UI or just use some of their exposed API's?
- Nick Parker
My Blog | My Articles
|
|
|
|
|
Thanks for quick reply Nick
I don`t want to use MSN Features in my OWN seprate application..what i am willing to make a Plugin which can cuztomize MSN`s TOAST and i can give my own message alert by using some Toast Class in API
is it Possible?
Thanks
|
|
|
|
|
Hi there!
I have two functions with one variable of type bool.
The mouse leave function do the following...
private void OnLeaveClip(object sender, System.EventArgs e)
{
picXMLmovie = false;
if(PBOrigem != null)
pictureBoxXML.Image = PBOrigem.Image;
}
And the mouse hover has this cycle
for(int i = 1; i <= jogadaslist.LastIndex(); i++)
{
if(picXMLmovie)
{
posinit = jogadaslist.GetTagAtPosition(i).start;
posend = jogadaslist.GetTagAtPosition(i).end;
for(int j = posinit; j <= posend; j++)
{
if(picXMLmovie)
{
pictureBoxXML.Image = analvideo.GetFrame(aviStream, j);
Refresh();
}
else
break;
}
}
else
break;
}
The problem is when I do the Leave Event, the cycle that is occouring in the Mouvehover event don´t STOP.
How can I do to STOP it, is it possible?!!
Thanks you very much
|
|
|
|
|
The MouseHover event won't be fired when your mouse leaves the client area, but that doesn't mean the code inside your MouseHover event won't continue to run. It will run until it completes. If you want to stop it, you should consider using a state variable (like a bool field called stop or something) that your MouseLeave event handler sets (i.e., set to true) and your MouseHover event checks, conditionally exits its loop, and resets (i.e., set to false).
The real problem I see with your code, however, is what you're doing within MouseHover. If you read the documentation (always a good thing), it states that the MouseHover event is fired continuously (several times a second) - even when you're mouse is not moving. You should not be performing exhaustive routines like you are now. Not only are you hogging up CPU cycles but you're most likely exhausting memory (especially if you're not disposing objects that require it, like the original Image that was assigned to the PictureBox.Image property).
You should consider using a timer that you enable once (don't enable it again if it's already enabled and use state variables like I mentioned in the first paragraph) and lets it run - don't execute your code continuously if you don't need to, and always dispose objects that implement IDisposable (like the Image and Bitmap classes, among many others) if you need to free memory immediately (for classes that follow the disposable pattern, they will eventually be released but only when the GC decides to clean-up that generation).
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
thanks for your help...
But I´m using a variable bool to stop the cycle that is running in MouveHover...
If you take a look, the only thing that mouseleave do is to put this variable bool to false in order to make that the if condition inside the cycles don´t execute.
The problem is that the mousehover continues to execute when I make the mouse leave the pictureBox.
I am usign the Visual Studio in DEbug mode and I put a breakpoint in the first instruction of mouseleave and this instruction is only executed when the cycle for in mouvehover ends =/
I think it´s a problem of two much memory occupied.
Your advice is to make a Dispose of the Image after the Refresh statement, isn´t it?!
I made that, you are right my program now occupies less memory, but the problem with the mousehover/leave persits =/
Thanks a lot
|
|
|
|
|
Sorry, I missed that the first time. It really helps if you post code correctly on this site. Use <PRE> tags (or the "pre" toolbar button below) for code blocks (that way you can tabify your code and use a fixed-width font) and <CODE> tags for inline code (like variables, methods, and even the tag names I mentioned, which are HTML-encoded).
As I mentioned before, the code inside MouseHover will continue to execute. The event will not fire anymore, but that doesn't stop the implementation from continuing. Unless you stop the code somehow it will continue.
The problem you're facing is because your handlers for both the MouseLeave and MouseHover events are running in the same thread. Your MouseLeave event handler won't execute until your MouseHover event handler completes.
There are many ways to solving this, but you really should read about threading applications if you're not familiar with it already. You can start by reading Threading[^] in the .NET Framework SDK on MSDN Online.
You execute your MouseHover event handler implement in a separate thread (move it into a new method). What you absolutely must do is use Control.Invoke to actually set the PictureBox.Image - you must make modifications - and most often, even read properties - from within the thread on which the control to be modified was created. If you don't, undefined problems may - and most often do - occur.
This way, since that code is executing in a separate thread your MouseLeave event handler is called at the proper time and your variable is set. When your MouseHover implementation loop reads that variable (that you don't need to invoke to get; only properties and methods that interop with the Win32 APIs for the control class, since every Windows Forms control encapsulates Win32 APIs and most encapsulate the Windows Common Controls) can stop and everything happens in the right order.
Another way is to start the MouseHover implementation in a separate thread, which you keep a reference to. In your MouseLeave event handler, call Abort on that thread reference, but make sure you handle any ThreadAbortExceptions that will be thrown.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
You were right...as always 
I used two threads and the mouse hover/leave works very well \o/
Thank you very much.
PS. Just two little questions...
Do you know where I can read some information about exceptions?! (mutexes, semaphores, etc)
Do you know where I can read some information about how to build classes?! I have many difficulties in that... =/
|
|
|
|
|
ee99035 wrote:
Do you know where I can read some information about exceptions?! (mutexes, semaphores, etc)
As a developer, there's a resource you should get very familiar with: the .NET Framework SDK[^]. There's no excuse for not reading it. It contains topics about all different sorts of programming scenarios with .NET and documents the base class library[^] (BCL). Specifically, if you want to read about the thread classes, read about the members of the System.Threading[^] namespace. If you installed the defaults for Visual Studio .NET, you have this installed locally too (can also be downloaded as part of the .NET Framework SDK without the need for Visual Studio 7.0 or newer from http://msdn.microsoft.com/netframework[^]).
ee99035 wrote:
Do you know where I can read some information about how to build classes?! I have many difficulties in that
For information on object-oriented programming you should either take a class or pick up some good books. You can also learn by example but you should undersatnd the basics of objects first. Just because you encapsulate a bunch of functions in a class doesn't make it an object-oriented design. The ubiquitous case is the Company>-Employee classes that a lot of books use.
You can also find articles online.
If you're looking for examples of object-oriented programs, well, that's what this web site is full of.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Does anyone know of a class library/DLL of the Platform SDK RAS API being wrapped in C#??
Thanks,
-Mark
|
|
|
|
|
You can either try Google[^] or MSN Search[^], P/Invoke the functions yourself (they're quite easy), or visit http://pinvoke.net[^] for signatures to many, many functions documented in the Platform SDK (and even a few that aren't, like the cards.dll exports).
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Actually there is a CP article (in purgatory) on this. www.codeproject.com/Purgatory/rasdemo.asp[^]
I believe one of my friends used this before. Personally haven't tested the code, but it might need some cleaning.
This posting is provided "AS IS" with no warranties, and confers no rights.
Alex Korchemniy
|
|
|
|
|
Hello,
I have some code which writes out an XML file. In the root element of the file I am trying to write the location of the schema file. However it isn't being written out as I expect.
An extract of my code is as follows
XmlElement rttElement = doc.CreateElement("roadTimeTable");
rttElement.SetAttribute("xmlns:xsi","http://www.w3.org/2001/XMLSchema-instance");
rttElement.SetAttribute("xsi:noNamespaceSchemaLocation",schemaFileName);but the result is
<?xml version="1.0" encoding="UTF-8"?>
<roadTimeTable xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="traffic_schema.xsd">
{omitted for brevity}As you can see the xsi: prefix on the attribute xsi:noNamespaceSchemaLocation is missing.
How do I get this to output properly? Or am I missing something and there is a better way to write out the location of the schema file?
Do you want to know more?
Vogon Building and Loan advise that your planet is at risk if you do not keep up repayments on any mortgage secured upon it. Please remember that the force of gravity can go up as well as down.
|
|
|
|
|
Use the overloaded SetAttribute that takes three string parameters: localName, namespaceURI, and value:
rttElement.SetAttribute("noNamespaceSchemaLocation",
"http://www.w3.org/2001/XMLSchema-instance", "traffic_schema.xsd");You also should not add namespace URIs and prefixes how you're doing it. This is what the XmlNamespaceManager is for. The XML DOM classes keep track of elements and namespaces and write them out accordingly.
The documentation for the XmlNamespaceManager in the .NET Framework SDK (installed with VS.NET and the .NET Framework SDK by default, and available online at http://msdn.microsoft.com/library[^]) includes more information and examples.
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
i got a header file written in c++ and the C# dont know how to use it
is there a way to convert the file and use it in .NET?
|
|
|
|
|
No, you must P/Invoke the functions and declare any constants and structs in managed code. It helps to know how unmanaged types map to managed types, like that an unmanaged long is a managed int (Int32) because they're both 32-bit integers.
Start be reading Consuming Unmanaged DLL Functions[^] and Marshaling Data with Platform Invoke[^].
Understand that C# does not use headers. In fact, pure Managed C++ doesn't need headers, either. Only when writing unmanaged applications in C++ or mixed-mode C++ (managed and unmanaged code) do you actually need headers (with regard to C++).
If you're looking for examples or signatures for common Win32 APIs (among a few others), take a look at http://pinvoke.net[^].
This posting is provided "AS IS" with no warranties, and confers no rights.
Software Design Engineer
Developer Division Sustained Engineering
Microsoft
[My Articles] [My Blog]
|
|
|
|
|
Hi there!
I have made some code in MFC previously and now I´m developing an aplication in C# and I need to use some functions that I define in MFC.
Can I integrate MFC code in C#, is this possible?! How can I do that?
Thanks very much, Sérgio
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
