Comments by M_Mogharrabi (Top 88 by date)

Eyval..., Thanks johannesnestler, that was exactly what i wanted. But there is a problem with your code.the selected value in the formDialog returns to the EditValue method but it does not set as TestProperty value! Is that my mistake?

Thanks BillWoodruff for your reply. "What exactly do you mean by "result" ? Do you mean something other than the currently selected value in your collection ?"
No i mean exactly the selected value in my collection by "result".

Hi Rajesh Gelli and Thanks.
See i have about 50 tables in my application that can update in run time and i want to notify immediatly when each of them is updated.
So do you think placing these 50 tables in session is correct?
Again do you think that comparing a table with it's previous session in every 1seconds(Timer interval) does not decrease the speed of application?

Thanks Rakesh Meel, but i think you did not read my question completely,I said in my question that "I can not use sqldependency because of it's long list of limitations"! I have used OUTER JOIN command in a lot of my queries while it is one of the Constraints of sqldependency.

Thanks Balamurugan, but i think you did not read my question completely,I said in my question that "I can not use sqldependency because of it's long list of limitations"! I have used OUTER JOIN command in a lot of my queries while it is one of the Constraints of sqldependency.

Because i want to refresh my forms immediatly after the table is updated however Timer maybe has a delay.also my application should work on a local network with maybe many clients so Timer can busy the network!

The main problem is with it's limitation on OUTER JOIN command.I have to use this command in a lot of my queries.

Hi Zoltan Zorgo and thanks for your reply.My situation is not like your invoice example, because the data should change in Table1 after Table2 was changed.
Also i can not use your suggestion about decreasing number of fields,because these fields have just 1:1 relation and thay are all have direct relation to each other.
The problem is that i could not decide between these two ways(Normalizing and De-Normalizing) in this specified situation with considering the advantages and disadvantages of these two ways?

Thanks Denis Shemenko,but i could not open this link because of some reasons! Could you please paste it here as your answer or help me in another way?

Thanks Sadique KT,Now it works for me too.

Thanks but my control is panelcontrol not panelcontrolcontainer.

I tried your solution but nothing changed.

Ey Val.... Chill60,It was my solution!How can i say my thanks to you?!

Hi Abhinav S and thanks.I tested the following code but it had no effect :
myExcelViewer.Focus();
Did you mean something like this?

Hi M_Tamas, yes i want to remove them at all.

Hi Kaushikhalvadiya,I could not understand your reply, what should i set to null?

I have asked my question in infragistics forum (http://www.infragistics.com/community/forums/p/77459/390928.aspx#390928) but no one answered me!

Thanks a lot for your time...

Thanks again,And the last question(but not the least),
I have found another sample of using cassia in "http://www.findbestopensource.com/product/cassia" but it is a little different:

ITerminalServicesManager manager = new TerminalServicesManager();
using (ITerminalServer server = manager.GetLocalServer())
{
server.Open();
foreach (ITerminalServicesSession session in server.GetSessions())
{
Console.WriteLine("Hi there, " + session.UserAccount + " on session " + session.SessionId);
Console.WriteLine("It looks like you logged on at " + session.LoginTime + " and are now " + session.ConnectionState);
}
}

Do you think which one is better?

Hi Suvabrata Roy, and thanks for your reply.I tested that code but it does not work with "winNT:" as the parameter of DirectoryEntry and i tried String.Format("LDAP://MY_SERVER_IP x.y.com","DC=x,DC=y, DC=com") instead.
Is it correct?

Thnx Aarti Meswania for your reply, but it does not my solution, because your code does not set the sequence of columns in my preferred format.

Thnx, but i can not understand what you mean?

Hi Abhinav S and thanx for your reply.

Thanks Bernhard Hiller,but i want to add dependency via installshield.It has a Dependency Scanner tool but it could find just COMSysApp but not SEN Service.
even when i add COMSysApp as a dependency and then install my service i can not see this dependency in list of dependencies of my installed service!?

Why not???
I could get this information by OnSessionChange() in windows service, but the problem is that sometimes it does not work correctly.So i want to find a better way...

thanx a lot,it was my solution!!!

Hi, Yvan Rodrigues,thanks for your reply. yes i mean the first one.I want to add a virtual printer for my application.please describe how should i do that?

yes Nothing found to solve my problem, I have tried using Thread and Timer but i could not found an example that shows me how can i call onstop() method when the system shutdown or restart...

Hi KornaKar, Thanks for your immediate reply.I have make a Thread and do my work in it and used System.Timers.Timer in it instead of while loop.but i have my problem yet.I mean the OnStop() method does not start automatically...

I have followed this two links and add my service to setup project,but my problem is that i want to add a .net dll file to this service because the service needs this dll to run successfully...

it does not give me any error message but also the dll have a warning icon when i add it to References.

Hi Silent Guardian and thanks for your reply but i do not think so.because the steps of this operation is something like this :
1. the user browse the system and select an image.
2. application copies that image to its folder with File.Copy() and add its name to a list.
3. the user select the name of image from list and then press delete button.
4. application should now delete an image with this name from its directory(the error will occur here)

I am sure that my images are not open in another processes.

Thanks but i do not have any user Id and Password..??

my problem is that when i use the following code to get the data from a sheet it automatically set the first row of the sheet as column name.The code is :

OleDbDataAdapter da = new OleDbDataAdapter("Select * from [Sheet1$]",OleCon); da.Fill(dt);

thanks, i will test it in my project and say the result.

Thanks a lot,I have found the solution... It was too easier than i thought!!!?

Thanks ChandraKantt for your immediate reply,
but how can i set CustomActionData property programmatically and also use it in beforeuninstall event?

So how should i use it with Smart devices??Because i have found this code to use in a Windows Application that works with Smart devices.

Hi Mike,
Excuse me for my imperfect question!!!I have correct it.
Please help me...

yes,It is a control of DevExpress control group.I thought it is too famous!!
in addition i have added it to my question tags.

yes,I have installed drivers and i could see com port in device manager and also i could found and run a c# code to open the port.but i want to know if there is another code to read data from my i2c device.my i2c device is RM_144 and '0x53' is the address of it.but i do not know how should i use this address!!!.....

This is the link(http://www.robot-electronics.co.uk/htm/usb_i2c_tech.htm) of my I2C-USB convertor documentation.but i could not found what should i do yet???
please describe more....

sorry for my delay.I have edited my question...

sorry for my delay.I have edited my question...

please describe your question more...

You can use CellEndEdit event of datagridview.it occurs after a cell edited by the user.also you can access to index of edited column with 'e' parameter of this event.

I want to write code for 'print' button. I have used ultraGrid1.DataSource and cast it directly to DataTable type but the problem is that the sequence and number of columns in DataSource does not match with current WinGrid that is shown on screen!!!

I am waiting for your helps,
Please help me....

I am waiting for your response please...

Hi,
I've solved that error by the solution of this link "http://stackoverflow.com/questions/310669/why-does-c-sharp-xmldocument-loadxmlstring-fail-when-an-xml-header-is-included".

but now i have another problem!
I have modified my rdlc file in my application but i could not save changes.I've used xmlDocument.Save() method but anything happens...
what is my mistake???

Hi bluesathish,
Thanks. I've tried the solution of this link too already.but it does not work and i've received that error again.I opened my rdlc report with Notepad but i did not see any Table tag in /Report/Body/ReportItems path...
please guide me.I am too new in using xml files...

I'm waiting for your helps...
please help me...

i am waiting for your response yet...
please help me..

hi,
i have downloaded the documentation of objectarx but i could not find any thing about print dwg file in it.

I am too beginner in objectARX.
please help me...

I have received previous message again...?

Thanks, i have tried net.exe map p: \\servername\sharedfolder
but i have received this message :
"the syntax of this command is: NET [ACCOUNT | COMPUTER | CONFIG |...]".

i have tried net use instead of net.exe but i received a message like the above.

i have tried "net use \\servername\sharedfolder" finally however received this message : "The command completed successfully".but what does it mean?how can i get the map of my path?

Thanks, but how can i map my path.the path is \\ServerName\SharedFolderName\ProtectedFolder\file.dwg

thanks OriginalGriff,i have changed my way,now i want to run my exe file just after the setup has finished.how can i do that?

i have removed form1_fill_panel.now i can see my forms but they are under ultraToolBarsManager control so i could not see top of my forms.

thanks Mika,i could not find why that file had that problem,i deleted that file and created another one on the same path but the problem did not solved.
I tried to create my backup file in a subfolder of the shared folder and when i tried to move this new file, i could do it!!!
however thanks for your help.

thanks Mike,i tried to change its security by network administrator from server computer but he does not have permission too.i think this problem is by SQL server,i mean SQL Server did not release the backup file after create it.

I think that the backup file is in use by SQL Server after performing backup query.How can i release the file from SQL Server?

I'm waiting to your replies yet!!!
please help me.

thanks Mike,yesterday i have create and install my service and then restart my windows so the service started successfully. but the problem occurred today when i boot my windows and opened the services list of windows from Control Panel\Administrative Tools\Services and selected my service i saw that it did not start automatically. then i restarted my windows and looked at services list again i saw it started successfully!!!

I have tried these two choices already but i received that error again.i have tried with my system administrator and it said access is denied.i wanted to change security settings but this file does not have Security tab in its properties!!!?

Thanks all, but none of these solutions solved my problem.I found the code,i used registry:

using Microsoft.Win32;

RegistryKey key = Registry.CurrentUser.OpenSubKey(@"Software\Microsoft\Installer\Assemblies");
string regfilepath="";
if (key!=null) // Make sure there are Assemblies
{
foreach(string Keyname in key.GetSubKeyNames())
{
if (Keyname.IndexOf("YOUR_EXE_FILE.EXE")>0)
{
regfilepath=Keyname.Replace('|','\\');
break;
}
}
}

thanks a lot.I mean any thing that works like windows service and it does not have the problems of windows service?

thanks SA,but i did not understand how can i use UserInteractive property to solve my problem.is there any way instead of windows service?

i want to get backup automatically with my windows service and i used timer to check my backup schedule table every N minutes.

yes, i have 3 applications and one of them contains a windows service.
i tried to install my application that contains service with visual stdio command prompt but i received that error again.
where should i define my windows service?it should be in an independent application or it can be at the middle of other applications?

thanks for your reply, but this link describe how to install windows service manually but i want to install my service automatically?

thanks for reply, but these codes return the path of executable file of application but not the path of where the application is installed.am i right?

why should i install .Net framework 2.0 and 3.5? i want to use .Net framework 4.0

thanks a lot,that was worked but i have another warning yet:

The value of the 'public key' attribute in 'Microsoft .NET Framework 4(x86 and x64)' does not match that of file 'C:\Program files\Microsoft SDKs\Windows\V7.0A\Bootstrapper\Packages\DotNetFx40\DotNetFx40_Full_x86_x64.exe'.

what does it try to say?

thanks Tejas_Vaishnav for your reply,but i have another question. should i define my windows service in an independent project or it can be in my main project with other forms?

thanks RaisKazi,the link was too useful.

should i start it myself?i thought it starts automatically when windows boots!
How should i start it?

thanks, you were right.i have granted permission of access to my share folder to server computer and my problem resolved.

i could not find AxSHDocVw.dll?