|
well, here is the sample text in text area
....
1) you'll send your blood glucose level up higher than you expected; 2) you'll fill up but without the nutrients that come with vegetables and grains; and 3) you'll gain weight. So, don't pass up a slice of birthday cake. Instead, eat a little less bread or potato, and replace it with the cake. Taking a brisk walk to burn some calories is also always helpful.
...
when I post back, it displays page cannot be found (generic error) this is an classic ASP.
It does not even go to Request.Form section..
If I remove the single quotes and semi-colons then it works.. OR if remove REPLACE word then also it works..
-----
|
|
|
|
|
SABhatti wrote: when I post back, it displays page cannot be found (generic error) this is an classic ASP.
Do you really get an http 404 error? That seems very unlikey, as the existance of the page doesn't change with what you send to it.
Could you quote some of the actual error message?
Have you disabled "friendly http errors" in the browser so that you see the actual error message?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
sorry it says PAGE CANNOT BE DISPLAYED.. click on refresh butoon, check you lan settings etc..
Well one thing that I did is to remote into the web server and browse it locally. Locally it works fine. But when I am trying to browse it from outside, it crashes.
-- modified at 15:09 Friday 19th October, 2007
-----
|
|
|
|
|
I guess it's no on the question about "friendly http errors", then. Fix that, so that you see the actual error message. Without a proper error message, it's just guesswork.
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
I have checked the configuration on IIS, and option to send detailed script error is selected.
As I mentioned before that it is working fine if I browse it from the actual web server using its IP. But it crashes if I access it from outside. I am also going to check with our firewall administrators.
Thanks for your help. -- the weird thing is that it is not giving any error, and this is really an old page in classic ASP, and I don't really know how to catch this exception in classic ASP...
-----
|
|
|
|
|
Have you disabled "friendly http errors" in the browser so that you see the actual error message?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
Well, we figured that it is the firewall. When ever user types REPALCE, FIND, or any word that is also a command in firewall, along with any special character like single quote, semi-colon, or double quote. The firwall take it as command injection and block it. It looks weired. Our firewall guys do not want to disable command injection. They said that we might have to use the SSL on the server. I don't know how correct is that. But on SSL enabled server it works fine.
Its definitely not how the browser displays the error. It is the firewall because the firewall does not let me catch any error.
-----
|
|
|
|
|
What kind of firewall is that? What is the purpose of blocking traffic like that? The firewall can't be access directly with an unauthorised request, can it? Is the protection (?) something that the "firewall guys" have come up with themselves?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
Hi.,
I am trying to send dataset to Webservice but if my dataset table have more than 3000 rows then it send SoapException.Exception is about Content-length. How can I send Dataset with Table having 100000 records
Thanks in advance.
Navneet.H
Develop2Program & Program2Develop
|
|
|
|
|
A request is limited to 4 MB by default. You have to change the settings in web.config on the site hosting the web service, so that it can accept larger requests.
Also, sending it as a data table means that there will be a lot of overhead in the serialising. An array of custom objects should reduce the size of the request.
Another alternative would be to serialise the data yourself using a BinaryWriter and then encode it using base64.
Why are you sending so much data to a web service anyway?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
Hi.,
I am having two servers on server-1 there is my Applicaton that copies the data from MS Access, creates the dataset and provide to the Webservice .On server-2 there is my webservice which accept the dataset and using sqlBulkCopy Fill Data into SQL Server. so problem is that all the tables having nearly 3000 records are successfully loaded , but the tables with more records are throwing exceptions. This is where I am getting the problem.
Thanks,
Navneet.H
Develop2Program & Program2Develop
|
|
|
|
|
I see.
Any progress with what I suggested?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
Hi !!
Yea! I have set the maxRequestLength ="2097150" now the data is flowing across and all is fine , only concern is speed so I am trying to compress and decompress at respective ends.
Respect
Navneet.H
Develop2Program & Program2Develop
|
|
|
|
|
Hello, I hope this is the right place to post, but anyways, here goes. I current have a forum, snitz, in place, but am having an IE specific problem. Basically what happens is, I have a page that drops a cookie which logs in the user. This all works fine, but once the cookie is dropped ALL post method data from forms become empty. Get works, and if I post data to a different site it works, so the break down is reading the data from the post. Here is the code that logs the user into the site:
<%
dim rsUser, conn
if len(Mid(Request.ServerVariables("AUTH_USER"), Instr(1, Request.ServerVariables("AUTH_USER"), "\") + 1)) > 0 and not strLoginStatus = 1 then
set conn = Server.CreateObject("ADODB.CONNECTION")
set rsUser = Server.CreateObject("ADODB.RECORDSET")
conn.Open strConnString
rsUser.Open "SELECT m.M_PASSWORD FROM glbPermissions p INNER JOIN FORUM_MEMBERS m ON p.id = m.M_FITS_ID WHERE p.loginName='" & lcase(Mid(Request.ServerVariables("AUTH_USER"), Instr(1, Request.ServerVariables("AUTH_USER"), "\") + 1)) & "'", conn
if not rsUser.EOF then
strDBNTUserName=trim(Mid(Request.ServerVariables("AUTH_USER"), Instr(1, Request.ServerVariables("AUTH_USER"), "\") + 1))
strEncodedPassword = rsUser("M_PASSWORD")
if strSetCookieToForum = 1 then
Response.Cookies(strUniqueID & "User").Path = strCookieURL
else
Response.Cookies(strUniqueID & "User").Path = "/"
end if
Response.Cookies(strUniqueID & "User")("Name") = strDBNTUserName
Response.Cookies(strUniqueID & "User")("Pword") = strEncodedPassword
'Response.Cookies(strUniqueID & "User")("Cookies") = Request.Form("Cookies")
if fSavePassWord = "true" then
Response.Cookies(strUniqueID & "User").Expires = dateAdd("d", intCookieDuration, strForumTimeAdjust)
end if
Session(strCookieURL & "last_here_date") = ReadLastHereDate(strDBNTFUserName)
strLoginStatus = 1
end if
rsUser.Close
conn.Close
end if
if Len(Request.QueryString("target")) > 0 then
Response.Redirect "login.asp?" & Request.QueryString("target")
else
Response.Redirect "default.asp"
end if
%>
All the previous code does is create the cookies. The variables are declared on one of the included pages. Once this code is executed, nothing works. I have created a simple asp page that just reads posted data which does not work once I use the above page:
<%=Request("test")%>
Before I log in, the above code will echo everything in the box, but after I log in, it receives nothing. I have tested this log in feature on firefox, and it works fine, but on ie, it just refuses to work. Hopefully someone can shed some insight onto this, because I've been at this for 2 days, and have made no progress.
-- modified at 14:52 Thursday 18th October, 2007
|
|
|
|
|
If your code works in FF then your problem is most likely to do with your security/privacy settings in IE. AFter all, the server-side code runs on the server (really!) and doesn't care what browser is making the call.
Fred
|
|
|
|
|
Hey Fred,
Thanks for the response! That was exactly the problem. I am using NT Authentication on only one page, while all the other pages are public access. Initially, I thought it was my code, but after looking at everything carefully, I realized that it was something to do with the authentication. If you could shed some insight as to why this would happen, it would greatly be appreciated. The current setup is a public viewalbe URL with one file using NT Authentication (hopefully that makes sense).
I've been googling around, and it seems there is a registry fix for this, but I cannot find it anywhere, and all the links that I have found are broken. Here is a page that I recently found: http://www.thescripts.com/forum/thread54999.html[^]
|
|
|
|
|
There is a need for qualified web developers in the Boston area. I have contracts with many of the best companies who are looking. The positions vary, and some would love a little design experience on top of the application experience. If you know of anyone interested in a career move, please contact me. Salary is Boston market value, which is very good.
Requirements vary but may include:
Java, PHP, SEO, UNIX/Linux, Perl, UI, Database experience
contact: jak@ndt.com
**Please no contractors
Judith A. Kane
Career Agent
New Dimensions in Technology, Inc. (NDT)
85 Lafayette Street
Salem, MA 01970
P: 978.744.1010 x119
F: 978.744.1011
jak@ndt.com
|
|
|
|
|
Wrong place to post this. On the Home page of the site in the left column you will find a link to the "Jobs Board"
|
|
|
|
|
Judith,
It should be kind of you to post in the messageboard so that many people can benefit from the opportunity. However, there is a dedicate Jobs Board in this website where, the responses for your requirement can be more assuring, alluring and promising too.
|
|
|
|
|
hi
i am having a webpage (developed in asp using vbscript) in it i have one hyperlink button when i click on that button file starts downloading from my system with that file name.its working fine, but now i want to download the file from another system which is connected to my system(say MS01 is another system name ) through LAN. can anybody send me the source code for this task.
-- modified at 7:00 Thursday 18th October, 2007
|
|
|
|
|
i am unable to add horizontal scroll bar to HTML select tag using the div tag......that's the only thing i could find over the internet.....and that too is not working.....!!!
any help would be appreciated.... 
|
|
|
|
|
|
thanks.....but overflow is not working......i have already tried it...
|
|
|
|
|
OK, can you post the HTML and tick the 'Ignore HTML Tags in this message' option and we'll have a look.
Cheers
Ben
|
|
|
|
|
<tr>
<td valign="top"><%=Language.getBalloonText("multiselect values")%><br>
<div style="width: 100px; height: 100px; overflow:scroll" > <select onDblClick="addSelected(document.selectForm.selectSource,document.selectForm.selectTarget)" name="selectSource" multiple id="selectSource" style="height:265px;" onmouseover="">
<%
out.print(ListOfValues.optionsList(request, false, false)); //options
%>
</select></div></td>
<td.....
</tr>
i've tried both overflow scroll and auto and seperately for overflow-x & overflow-y
the vertical scroll bar comes but not the horizontal.
when i use overflow:scroll the tips of the scroll bar appear but there is no bar to scroll 
thanks for ur help 
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
