Re: image processing - Graphics Discussion Boards

First Prev Next

Re: low important response

aboyaser3-Oct-09 23:27

aboyaser

3-Oct-09 23:27

any way thank you
you gived me a briliante idea
we must always learn from children

for the second time thank you
Big Grin | :-D

Re: low important response

Tim Craig4-Oct-09 8:03

Tim Craig

4-Oct-09 8:03

Apparently you and learning, never the twain shall meet.

You measure democracy by the freedom it gives its dissidents, not the freedom it gives its assimilated conformists.

WM ASF Writer Audio Recording problem

Subhash Madhukar30-Sep-09 16:03

Subhash Madhukar

30-Sep-09 16:03

Hi Friends,

I made a desktop and audio(mike) capture GRF in graphedit.

On some systems audio recording stops after 30 sec but video recording has no issue.

I did all things in source code(c++ application) tracked IMediaEvent, but as audio recording stopeed in between no error event is fired.

Note: problem occur only on some laptop pc till now it has not occured in any desktop PC

Laptop "qasf.dll" version is 10.0.03802
I tried with differnt versions of same dll but all in vain on the laptop.

System configuartion is below:
RAM - 1790MB
CPU - Intel(R) Core (TM)2 duo CPU 1.83Ghz(2 CPU)

GRF file is stored at below link

http://www.fileflyer.com/view/uiqJXB1[^]

Thanks,
Subhash

how can load and transform (with annotations or equivalent ) an tiff file and save it again? with visual basic 2005 or C#

xabalb29-Sep-09 5:52

xabalb

29-Sep-09 5:52

how can load and transform (with annotations or equivalent ) an tiff file and save it again (with visual basic 2005 or C#)

Re: how can load and transform (with annotations or equivalent ) an tiff file and save it again? with visual basic 2005 or C#

Richard MacCutchan29-Sep-09 22:29

Richard MacCutchan

29-Sep-09 22:29

xabalb wrote:
how can load and transform (with annotations or equivalent ) an tiff file and save it again (with visual basic 2005 or C#)

This question is both too vague and too broad. Please explain what you have tried and where you are having problems, and maybe someone will be able to assist you.

image processing

rizwana rashid28-Sep-09 10:20

rizwana rashid

28-Sep-09 10:20

what is the latest work done in image processing feild?

Re: image processing

Henry Minute28-Sep-09 10:37

Henry Minute

28-Sep-09 10:37

Well, I'm not doing much with Fields at the moment, although this last weekend I photoshopped some images of my sister's garden.

Hope this helps. Smile | :)

Henry Minute

Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”

Re: image processing

Tim Craig29-Sep-09 18:32

Tim Craig

29-Sep-09 18:32

I got my traffic cone tracking program to work.

You measure democracy by the freedom it gives its dissidents, not the freedom it gives its assimilated conformists.

Link to download photoshop cs4 [modified]

Mekong River30-Aug-09 17:12

Mekong River

30-Aug-09 17:12

Hi, does anyone know where is the direct hyperlink can I download Adobe Photoshp CS4 trail version? I try with Adobe website but the the download could not be start. I don't know why, I try to check their website resource but seem no solution. I already have my download manager (GetRight) and if someone have this software in any website please let me know. I need to download it for my study.

Thank in advance!!!

modified on Sunday, August 30, 2009 11:44 PM

Directx pls

nirishere30-Aug-09 11:55

nirishere

30-Aug-09 11:55

Anyone knows if a directx window can be transparent and a click-thru ?
like this example

Finding a polygon that encloses a set of points

gantww28-Aug-09 7:06

gantww

28-Aug-09 7:06

Greetings,
I'm trying to determine the best way to get a polygon from a set of points. The points are not in any particularly useful order (they are the endpoints of individual lines that fill the polygon in question). How can I easily take such a set of points and figure out the vertices of a polygon from them? The polygons may have gaps inside of them. Any ideas?

Thanks,
Will

Re: Finding a polygon that encloses a set of points

Luc Pattyn28-Aug-09 7:45

Luc Pattyn

28-Aug-09 7:45

so you need the hull or the convex hull of some objects? That is pretty straightforward, just google for those terms.

BTW: it is an algorithmic problem, not really a graphic one.

Smile | :)

Luc Pattyn

Badger | [badger,badger,badger,badger...]

Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.

de-captcha project Pin

Sepirothftw27-Aug-09 21:31

Sepirothftw

27-Aug-09 21:31

Hello all,
first of all im sorry if its the wrong place for this question.
I am trying to decaptcha the following captcha:
[IMG]http://i26.tinypic.com/wrazt.png[/IMG]
what i am trying to do is removing the letters from the rest of the image. I am using Matlab atm but will do it in C# i think. its where i stucked, since all texture on background and letters are same, i can't find a proper way of doing it.

Im looking for your suggestions, thanks in advance
ps: its not a hacking project or so, never will be used for spamming or other purposes.

Re: de-captcha project Pin

ely_bob27-Oct-09 6:10

ely_bob

27-Oct-09 6:10

good luck with that....

DirectX, TIN surface models. Sample code for creating a mesh.

st1426-Aug-09 1:38

st14

26-Aug-09 1:38

Hi,

I was looking at Andrew Rissing's project AVID and was impressed. His code creates meshes from spheres and cylinders. (Ball and Stick class). I,ve done a small amount of 3d (under borland) but nothing under .net. Can anyone point me to an example of how to load a mesh from a TIN? I'm not using an *.x file. For example I would like to create a TinSurface class where I have a list of vectors (x,y,z) and a list of triangles (v1, v2, v3). Ideally I would like a drape a bitmap (green grass, brown dirt etc) but this can wait. ( I guess I could draw some funny looking trees with Andrew's classes while I'm at it !)

I'm doing volume calcs between 2 surfaces and would like to graphically show how the surfaces intersect (for cut/fill etc).

Thanks

Stuart

directx , create big mesh object.

csipahi16-Aug-09 4:39

csipahi

16-Aug-09 4:39

i try to create a big mesh object from vertex and index buffers but; when i use index and vertex buffer manualy like draw indexed primitive itis works good. but when lock and copy both buffers on mesh. mesh->drawsubset not work opmtimaly.

abstract points:

* i use 32 bit indices for create mesh.
* copy vertex and index buffer to locked mesh buffers.
* all codes work good.
* but that rendered plane mesh is not like a plane!!! Smile | :)

points :

* use FVF : NORMAL, POINT, TEX1;
* use 32 bit indices for create mesh.
* use DFMT16 for z-buffer;
* use 40401 vertices.
* use 80000 faces.
* that plane coords 201 to 201 and all normals (0,1,0)

can i told; please help;

Re: directx , create big mesh object.

Baltoro16-Aug-09 11:15

Baltoro

16-Aug-09 11:15

Apparently, English isn't your native language. I think most everyone here will have a difficult time understanding the problems in your code. You should just post your source code, that's what we all understand. In DirectX, especially if you are new to it, errors can be subtle, and hard to spot. Based on your description, we aren't going to have a clue as to what is not working properly.
Are you using source code from a DirectX SDK sample? What version? DirectX 9? DirectX 10? Are you loading the mesh from a file, or creating it from just a list of vertices?
And, this last line,
"* that plane coords 201 to 201 and all normals (0,1,0)"
...really makes no sense at all (but, I'd guess you are having lighting problems, or you wouldn't be using the normals).
It is possible that your graphics card doesn't have the capabilities to render correctly with the Render State you have specified, but, I doubt it. It's probably just the complexity of the mesh object.

how do i divide a line segment into set of vertices

gourishsio6-Aug-09 20:31

gourishsio

6-Aug-09 20:31

I got a connected line segments. These line segments are connected with a set of vertices. Now, i need to redistribute the vertices over this line in such a way that, all the vertices are equally spaced.

I mean, suppose if the user wants the vertices to be redistributed with the spacing of say 10 units.. Here i need to have new set of vertices, having distance between each pair of points(x,y) should be 10.

One way i tried this is to start with the first point of the connected lines, and read each point(x,y) along the line segment and find whether the distance of these two points is 10. If it is 10, then take the new point as your reference point and repeat the process... This method works fine. But for lines of different angles, the distance is not same.. so i dont get equally spaced points.

Is there any other way out for this..??

Thanks in advance

Re: how do i divide a line segment into set of vertices

RichardM128-Oct-09 8:40

RichardM1

28-Oct-09 8:40

You can not do this with arbitrary spacing of the new points, if the old points are not co-linear.
You have to find the common denominator of the length of distance between the given point, and to get even spacing your units-between-new-vertices have to be that number divided by an integer. If, for instance the distance between starting vertices are: {10,6,8,2)
The largest distance between resulting vertices would be 2 (though it could be 1, 0.66, 0.5, 0.4, etc).
If the distances are (10.1,6.07,8,2), then the maximum distance between vertices would be on the order of 0.01 units.
Hope this is not too late, and hope it helps. If it does, it is because you understand what I said, as opposed to me telling you how to do it.
Unless this was a yes or no answer for a test...

Silver member by constant and unflinching longevity.

Can GDI+ do this?

transoft30-Jul-09 9:31

transoft

30-Jul-09 9:31

Hi,

I want to scale and rotate a bitmap (loaded using GDI+) and save the rotated and scaled bitmap to a file using GDI+.

How can I do it?

Thanks,

modified on Friday, July 31, 2009 5:09 PM

Re: Can GDI+ do this?

Tim Craig31-Jul-09 18:30

Tim Craig

31-Jul-09 18:30

Did you read the GDI+ documentation on bitmaps?

You measure democracy by the freedom it gives its dissidents, not the freedom it gives its assimilated conformists.

Re: Can GDI+ do this?

transoft2-Aug-09 4:06

transoft

2-Aug-09 4:06

Did you really understand GDI+? I read GDI+ several days and try to use following code:

Graphics g(hdc);
Image i(L"HelloWorld.bmp");
g.DrawImage(&amp;i,0,1024);
g.TranslateTransform(100.0f, 50.0f);
g.RotateTransform(45.0f);
g.DrawImage(ℑ,0,0);
CLSID jpgClsid;
GetEncoderClsid(L"image/jpeg", &amp;jpgClsid);
i.Save(pIStream1, &amp;jpgClsid);

I had no luck. Did you save a scaled or rotated bitmap using GDI+ before?

Re: Can GDI+ do this?

Luc Pattyn31-Jul-09 18:53

Luc Pattyn

31-Jul-09 18:53

Yes. Read up on the following:

Bitmap.CreateGraphics
Graphics.RotateTransform
Graphics.DrawImage

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Re: Can GDI+ do this?

transoft1-Aug-09 2:15

transoft

1-Aug-09 2:15

Thank you very much for reply.

I want to save the rotated Image to a file.

"Graphics.DrawImage" can not save to a file?

Right? Can I get bitmap from rotated "Graphics"?

Best regards,

Re: Can GDI+ do this?

Luc Pattyn1-Aug-09 6:54

Luc Pattyn

1-Aug-09 6:54

I gave you all the pointers you need, and you need all I gave you.
Do some reading and use your brain, I'm not going to hold your hand.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Last Visit: 31-Dec-99 18:00 Last Update: 21-May-24 23:00

Refresh

ᐊ Prev 1...15 16 17 181920 21 22 23 24 Next ᐅ

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.