|
This should meet your needs:
var q2 = from mfg in db.Mfg
where mfg.MfgName == Common.productPublisherName
select mfg.MfgNumber;
foreach (var string mfgNumber in q2) {
....
}I just re-read your post and realized you expect there to be (at most) one entry, so Mark's answer is the one you want.
/ravi
|
|
|
|
|
Ravi Bhavnani wrote: foreach (var string mfgNumber in q2) {
The OP did say without for loop 
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
Mark Nischalke wrote: The OP did say without for loop
The loop in my response processes the returned data - it doesn't extract it.
/ravi
|
|
|
|
|
The only thing your code does different from the OPs is return a single property of the object rather than the object as a whole. LINQ queries are not executed until requested such as when the GetEnumerator method is called in a for each statement. So, yes your statement does extract the data, then processes it.
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
I just re-read the original post and realized he expects only one entry.  My bad.
/ravi
|
|
|
|
|
Use Single if the query will return a single result. q2 will be of type Mfg
var q2 =(from mfg in db.Mfg
where mfg.MfgName == Common.productPublisherName
select mfg).Single();
or in case the query returns nothing create an object with default values, or null.
var q2 =(from mfg in db.Mfg
where mfg.MfgName == Common.productPublisherName
select mfg).SingleOrDefault();
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
In the main form, the button is disable that, after fulfilling the conditions in the external class must activate the button. can you help me? Thanks so much for all the advice. Mark
|
|
|
|
|
|
Hi,
I have a C# program (Green10) that runs fine on most every computer I've tried it on. But it doesnt run properly on a new computer I got.
I've downloaded and installed the .NET frameworks.
Any ideas what else it could be?
Thanks,
Green Lamar
www.GreenProductionss.com
modified on Friday, August 5, 2011 3:03 PM
|
|
|
|
|
Never post your email address in any forum, unless you really like spam! If anyone replies to you, you will receive an email to let you know
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
Security settings, maybe?
And like Griff said, edit your post and get rid of that e-mail address, or you'll get spammed.
|
|
|
|
|
HighlanderGreen wrote: But it doesnt run properly
Might help to specify exactly what that means.
|
|
|
|
|
What do you mean by properly?
Is really slow and sluggish?
I downloaded it for curiosity and it's really slow and sluggish on 16 GB RAM and iCore7 980.
Is your new computer running Windows 7 64 too?
Maybe this is the problem. I saw a LOT of interop(office and not only) files in there. That might be the cause.
All the best,
Dan
|
|
|
|
|
I've not noticed it to be slow on any machines.
Anyway, my main focus in these posts is figure out why it doesnt run on some machines.
Does everything seem to work on your machine?
I need to be sure it tuns on others machines.
Thanks a bunch,
Green
www.GreenProductionss.com/C_samples.html
|
|
|
|
|
I have two DataGridViewComboBoxColumns in a DataGridView. Column 1 contains {"A", "B", "C"}. The contents of column 2 should depend on the value displayed in the Column 1 cell in the active row; if "A" is displayed, Column 2 should contain {"1", "2", "3"}; if "B" is displayed, it should contain {"4", "5", "6"}; if "C" is displayed, it should be {"7", "8", "9"}. The change in display should be immediate; i.e., when "A" is selected, Column 2 should immediately display "1" - I shouldn't have to click on another cell to cause the change. How can I do this?
Basicly when I make a selection in one combobox (i.e the one in row 1) then I want the corresponding combobox in row 2 (same row) to update its content immediately. At the moment the update of content only happens once I click somewhere else in the datagridview.
any suggestions
|
|
|
|
|
I've got a bit of brain freeze going on...
I've got an array of control locations (a result of a layout process), and the bounding rectangle is something like -2000, -4000, 2000, 4000...I need to translate these locations so that they can be drawn on a panel control. I don't need them to 'fit' in the panel, i.e. scroll bars are acceptable.
Ideas???
|
|
|
|
|
I'm not sure I understood the question correctly. If you have a control you can add it to your panel and set the Location property to 0,0 (in Forms), that should set that control to the upper left corner. You can calculate the following control's Location with the Height and Width properties of the previous control.
Is this what you want?
V.
|
|
|
|
|
ah no, I've got a set of locations but if I were to directly add them to the panel they would be outside the bounds, clientbounds I think.
The locations were set it via in a unrelated coord space, I need to translate these cords so that they will be visible on the panels left/top 0,0 coord space.
I don't think it's a simple PointToClient/PointToScreen type thing...or at least I couldn't get that to work.
I think I need to use Point.Offset, but its working out the offset values that I'm struggling with.
Or maybe there's an alternative, can I change the panel's bounds? So that its the same as the bounds of these locations?
So my controls are in a rectangle (-x, -y, w, h), and I thought if I just move each location by +x1,+y1 then that should mean they would be visible on the panel which would be (0,0,pw,ph)
does that make any sense??? 
|
|
|
|
|
Do you have relevant code (not too much please) I'm not quite following what' happening.
- Which property is set out of bounds? How did you get that value (-3000 eg)
- Are you using Forms or WPF?
- What exactly did you try already?
V.
|
|
|
|
|
mmm, that might be difficult (and confuse things)...but I'll give it a go.
I've got an array of controls NodeLayout which are moved about by a Force-Based Graph Layout algorithim, which starts of setting the locations to a random value (-50,50), then shifting them about as it iterates. I've also got the following function:
private Rectangle GetDiagramBounds()
{
int minX = Int32.MaxValue, minY = Int32.MaxValue;
int maxX = Int32.MinValue, maxY = Int32.MinValue;
foreach (NodeUI node in GraphUI.NodeUIs)
{
if (node.Location.X < minX)
minX = node.Location.X;
if (node.Location.X > maxX)
maxX = node.Location.X;
if (node.Location.Y < minY)
minY = node.Location.Y;
if (node.Location.Y > maxY)
maxY = node.Location.Y;
}
return Rectangle.FromLTRB(minX, minY, maxX, maxY);
}
Which returns the bounds of the resultant locations.
When this routine runs, that GetDiagramBounds returns values like (-2000, -6000, 3000, 5000).
I would like to draw these controls on a panel (although if that's the wrong control then I'm happy to change). But when I do, nothing appears, I'm thinking because the panel has a drawable area, and I'm drawing outside that area.
So I need to shift/translate all the positions so that they appear within the panel, but without altering their relative positions. I thought that meant shifiting so their location is > 0,0...
So at the moment I've got as the final step for each control in the array (nodeUI is the control):
Point newLoc = nodeUI.Location;
newLoc.X += Math.Abs(logicalBounds.X);
newLoc.Y += Math.Abs(logicalBounds.Y);
nodeUI.Location = newLoc;
logicalBounds being the result of that GetDiagramBounds function above.
But the locations are still < 0,0 for most of them.
|
|
|
|
|
mmm, It looks to me like you need to calculate or determine your offset and change the location of the elements with that offset.
I would do the following.
1. Add a control to the panel via code and set it to an offset 0,0, then 10, 10 then -10, 10.
2. Try to hardcode 1 element to an offset on your screen, if it shows, you have your problem
3. Add a button that adds/substracts an offset (eg 100) and make your panel update accordingly.
- What kind of control is the NodeUI? is it a viewable control? (what happens if you hardcode one on a panel?
- You did use mypanel.Controls.Add(whatevercontrol) ?
- Did you try to redraw the panel with the update or invalidate method (can't remember which one)
- You could create a panel in code which is big enough to hold all controls, add the controls to this panel and add that panel to the panel you need, that should definitely show the scrollbar. (change the background to something obvious so you're sure it's added)
V.
|
|
|
|
|
NodeUI is viewable, and they all start visible on the panel, and they are added via Control.Add.
I do use Invalidate() to redraw (also to draw the lines connecting NodeUI's, these aren't controls and I just paint on the panel directly)
For certain array's of nodeui's everthing works, and all the controls are visible...but I think that's more by fluke rather than logic!
Using the create new panel idea seems a good approach...I'll give that a go.
Thanks for your help and ideas.
|
|
|
|
|
ne more thing, now I think about it. Make sure you use suspendlayout/resumelayout correctly. 
good luck.
V.
|
|
|
|
|
I think its working with this (I forgot to grab the exact same data I was having problems with)
List<NodeUI> newNodeUIs = new List<NodeUI>(NodeUIs.Capacity);
int minX = (nodeLayouts.Min(l => l.Location.X) * -1) + 50;
int minY = (nodeLayouts.Min(l => l.Location.Y) * -1) + 50;
for (int i = 0; i < this.NodeUIs.Count; i++)
{
NodeUI nodeUI = FindNodeUI(nodeLayouts[i].Node);
Point loc = nodeLayouts[i].Location;
loc.X += minX;
loc.Y += minY;
nodeUI.Location = loc;
newNodeUIs.Add(nodeUI);
}
panelGraph.Controls.Clear();
panelGraph.Controls.AddRange(newNodeUIs.ToArray());
panelGraph.ClientSize = GetNodeLayoutBounds(nodeLayouts).Size;
NodeLayouts is not the array of controls, but a struct with their original positions in, the layout algorithm works on that instead. But I think it was using the min of the locations rather than the bounds to do the offset that worked.
Thanks again for your help!
|
|
|
|
|
You're welcome, and also thanks for the feedback. It's nice to know you found a solution.
V.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
