|
Unfortunately you are running into a factor endemic to the technology. Given that consumer inkjet relies on the characteristics of a water-based fluid, those characteristics (concentration, conductivity, etc) tend to change over time. This leads to jet clogging, poor adherence to paper, and so on. Consumer printers have minimal ability to manage this, given that they're sold below cost typically. The manufacturer makes their money on cartridges, which usually contain the elements most sensitive to time-based changes in the ink.
Your application is a little difficult as well. Printing optical disc labels implies adhesive-backed paper, which you can't use in a laser due to the heat.
My suggestion is to find a local print shop (is Kinko's still around?) that would print labels for you as you need them.
The alternative is to keep an inkjet printer around and print a test page to exercise the thing every so often.
Software Zen: delete this;
|
|
|
|
|
Of course you can use sticky labels (which come on backing sheets) in a laser printer, provided that you use label stock that is designed for this use, as most commercial labels now are. The problems which concern me with stick-on CD labels are the difficulty of getting them perfectly centered when applying them and the added thickness which they introduce, which is a problem for some slim-line CD drives.
|
|
|
|
|
I haven't bought labels in a long time, so I didn't realize they'd addressed the label-coming-off-around-the-drum problem they used to have. Good to know.
Software Zen: delete this;
|
|
|
|
|
I always used the laser Labels, and that Stomper/Stamper thingy.
buy good labels.
TOTALLY Agree about the Inkjets. I had ONE, never again. Same exact problem.
I did learn that taking the toner cartridges out, and ZIP LOCKING them air tight really helped.
Also try taking them out and RE-APPLYING the tape/plastic over the nozzle port.
Finally, try cleaning a "dried out one" with alcohol at the port, until you get some color. I've done that, but the ink was a bit funny for a few prints...
With ALL of the "games" they play with Tech and these cartridges. You would think an AIR TIGHT SEAL when the printer is off would be ONE of them? Park the print head in a way that keeps the air away...
But then how do you make money on a $50 printer... Selling Ink... Continuously!
I would Pay Kinkos to use their printer at their OUTRAGEOUS fees... It's got to be cheaper!
|
|
|
|
|
and this right here reminds me why I bought our laserjet a few years ago.
To err is human to really mess up you need a computer
|
|
|
|
|
I leave my inkjet printer powered on all the time and have a cron job print a test page once week to keep it happy! 
I don't print enough to justify a laser.
|
|
|
|
|
StarNamer_ wrote: I don't print enough to justify a laser.
What's your criteria for "justifying" a laser?
My laser color cost me $100 at Staples nearly a decade ago. Clearly, I don't print much either, as I'm still on the starter cartridges.
Given what inkjets do when underutilized, the argument could be made that you should avoid inkjets if you don't print much...
If I followed your idea, I'd probably waste the entire cartridges printing weekly test pages and nothing else.
|
|
|
|
|
The cheapest laser colour printer on Amazon is about £140 (Xerox). I might be able to find one cheaper elsewhere but it would probably be a brand I'd never heard of and of unknown reliability.
I have a 10-year old Epson inkjet printer+scanner which cost about £60 when I bought it; it uses individual colour ink cartridges. I've probably had trouble with ink cartridges less than half a dozen times since I've had it.
I actually scan more than I print - 2 to 3 scans a month compared with only 1 or 2 prints. So this would mean keeping the inkjet alongside the laser or buying a combined colour laser printer with scanner - the cheapest I could see was about £275 (HP) on Amazon.
Since I no longer print as much as I used to (does anyone?), sending a single page print to the printer every week keeps the heads OK and I haven't had problems for couple of years. The test print paper gets used for sketching, doodling, rough notes, etc., so isn't just thrown away. I buy 'compatible' cartridges which last for years - I last replaced one about a year ago.
Prior to the Covid-19 lockdown and working from home, if I needed laser quality prints, I could send them to a work printer; I work in the IT department. For reading, letters, etc, inkjet quality is usually acceptable.
So, given I'd need to spend around £275 for about 15 to 20 prints per year, I can't justify replacing the inkjet printer unless it breaks down. And with such low usage that seems unlikely!
Anyway, I'd rather spend the money on add-ons to my 3D printer where I 'print' something almost every day!
|
|
|
|
|
I share some of your pain, and I have a Canon color inkjet for the same primary reason (printing on CDs) that you do. Like you, I use it very rarely. However, although the first print after a long (weeks) gap always takes a while (minutes) to start, and quite a lot of ink sometimes seems to disappear between uses, I have never had serious problems with it. One reason may be that I always shut it down 'properly', using the front panel soft power switch, after every use. Canon does warn you to do this, and it does seem to matter. I have always assumed that the printer 'caps' the heads in some way when you formally shut it down, so that they are at least somewhat protected from blocking up and/or drying out.
|
|
|
|
|
Interesting - I was not aware of this. That being said, I always use its power button to power it off (which is clearly not just a switch that simply cuts power), and I've always made the assumption it "does the right thing" to do a clean shutdown--there clearly is some activity taking place, and it takes a few seconds for it to power off.
|
|
|
|
|
You are doing exactly what I do, then.
|
|
|
|
|
Oddly, I have a Canon Pixima ip6700D printer that seems to just work. I have not used it for up to 3-4 months and then when I do I print one test sheet and then it is ready to go with no issues. I find it amazing that this keeps being the case. I never have used any cartridges that are not original Canon OEM ones in it. I keep expecting to have to pitch it but it likes its home i guess.
It is also capable to print on CD's. Although the option was unavailable for US models and you could not order the parts from Canon for US. So I asked a work associate in Canada to get me the pieces. they where less than $15. Changed the firmware to Europe version and away she went.
Of course now that I said all this the ink in my 6700D just flashed dried out and nozzles melted. 
|
|
|
|
|
MikeMSA wrote: Oddly, I have a Canon Pixima ip6700D printer that seems to just work
[...]
MikeMSA wrote: Of course now that I said all this the ink in my 6700D just flashed dried out and nozzles melted
You jinxed it. So the lesson is...
[Basic Fawlty]
Don't mention the...printer?
[/Basic Fawlty]
|
|
|
|
|
Here's what worked for me. I bought an inexpensive 'pigment base' inkjet printer that could do CDs and could also use refillable ink cartridges. I then used 'dye based' inks in the cartridges instead of the normal pigment inks. The pigment ink particles are larger than the dye ink particles so the pigment ink printer heads have larger holes than the dye ink printers. Basically, I wore out the printer mechanism before I got a clog (very infrequent) that wouldn't clear with a simple cleaning.
There are issues with the dye based inks. The 'print' will be more likely to fade and be less 'wear' resistant than a pigment ink print. Normally when you make a print with a dye based printer you should use a swellable polymer paper to make the print more wear/fade resistant.
|
|
|
|
|
I've had a couple of Epson inkjets over the years and always been impressed (surprised even) on how well they handle my lack of use. Very occasionally I need to run the "head clean" routine but not more than once. Not sure if always using genuine Epson cartridges contribute it that.
Currently I have an Epson XP-6000 (scanner + A4/CD printing) and am happy with it. Only thing I'm nervous about is the ink cartridges only suit this one model so Epson might stop making them sooner than other multi-model cartridges and render my printer useless.
|
|
|
|
|
So I was fixing my Midi lib's streaming Send() routine to work with large sysex messages and generally be more efficient.
I get called back on send completion - from a different thread. However, list here is never touched again. I just hang on to the enumerator. The enumerator doesn't get touched outside the callback once its filled, and the callback never happens until its filled, so it's "safe" threadwise.
I need to keep the enumerator around so I have a member var called _sendQueue and to be safe I always do Interlocked operations when writing it.
Interlocked.Exchange(ref _sendQueue , list.GetEnumerator());
Anyway, the above succeeds, but a bit later when I'm packaging it for sending, I call _sendQueue.Current to get the current event and it returns null frome Current!!!
There are never nulls in that list I built.
I instead replaced the code above with this:
var e = list.GetEnumerator();
Interlocked.Exchange(ref _sendQueue , e);
And it works.
For the life of me, I have no idea why. I'm about to dive into the IL out of curiosity but I don't think it's going to tell me much.
There have been a lot of oddities in writing this MIDI code, but the above takes the cake.
Real programmers use butterflies
|
|
|
|
|
Might it be a scoping problem? "e" has a scope that is larger than the enumerator received from the .GetEnumerator() call.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
except that the scope is the same, or it should be for the duration of that call? The routine returns immediately after that, without doing anything else except calling a method that takes no parameters and returns no value.
furthermore it's not like the enumerator stored in e/_sendQueue is failing at all in terms of accessing it - it's that the Current member is returning null so the failure is relatively far downstream from this.
I'm stumped.
Real programmers use butterflies
|
|
|
|
|
".Current" will be null if you haven't done a .MoveNext or something else to traverse it. If you do use MoveNext then check its return value is true, as if you're doing something under the covers to alter the list (such as remove an item from it) but not using the proper methods then the enum and list will get out of sync and you'll get null from Current, but in that instance MoveNext will have returned false.
|
|
|
|
|
actually it's supposed to throw if you haven't moved yet, but in this i have.
Real programmers use butterflies
|
|
|
|
|
That's not my experience. Of List<T> anyway, you didn't mention what types you are using.
|
|
|
|
|
the type is a reference type known as MidiMessage.
If List<T>'s enumerator doesn't throw on the first fetch of Current before calling MoveNext() then I promise you it's a bug. It should fail with (IIRC) InvalidOperationException
Real programmers use butterflies
|
|
|
|
|
|
i stand corrected
Real programmers use butterflies
|
|
|
|
|
I've got this idea rolling around in my head - building a rig that provides a server and four players for playing quake 1, 2, 3, and 4.
The "box" will contain a raspberry pi 4 (8gb) to serve as a dedicated server that will run all four quake servers, an 8-port gigabit switch, and a surge protector that provides power for up to eight devices.
Additionally, there will be one pi 4 (2gb) for each player, and it will already be connected to the switch and surge protector, and be booting from a USB drive that already contains all of the quake versions on it.
The idea is to set it on a table, and let players connect their own monitor, keyboard, mouse, and headphones. Since all hardware is equal, all players would have the same "experience" and connectivity quality.
The will be an external ethernet port and power outlet that will allow the user to daisy chain additional "tower" units to add players (four at a time, or however many players are supported by the secondary tower).
Just something taking up space in my brain box...
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
