Click here to Skip to main content
14,694,646 members
Articles » Languages » VB.NET » Windows Forms
Posted 22 Jan 2008


125 bookmarked

Programmatically Complete PDF Form Fields using Visual Basic and the iTextSharp DLL

Rate me:
Please Sign up or sign in to vote.
4.95/5 (45 votes)
22 Jan 2008CPOL
Article describing how to programmatically complete PDF form fields with Visual Basic and the iTextSharp DLL


This article describes a quick and simple approach to programmatically completing a PDF document through the use of the iTextSharp DLL. The article also discusses how one might go about using the iTextSharp DLL to discover and map the fields available within an existing PDF if the programmer has only the PDF, but does not have Adobe Designer or even a list of the names of the fields present in the PDF.


Figure 1: Resulting PDF after Filling in Fields Programmatically

iTextSharp is a C# port of a Java library written to support the creation and manipulation of PDF documents. The project is available for download through With the iTextSharp DLL, it is possible to not only populate fields in an existing PDF document, but also to dynamically create PDFs. The examples here are limited to a description of the procedures associated with the completion of a PDF. The download will contain examples of PDF creation in both Visual Basic and C#.

The examples contained herein are dependent upon the availability of the iTextSharp DLL. Use the link provided previously in order to download the DLL locally to your development machine. In order to demonstrate filling out a PDF using the iTextSharp DLL, I downloaded a copy of the W-4 PDF form from the IRS website. The form contains controls and may be filled out programmatically, so it serves as a good example.

PDF documents that do not contain controls, i.e. those meant to be printed and filled in with a pencil, cannot be completed using this approach. Of course, if you have access to Adobe tools (Adobe Professional, Adobe Designer), you can always create your own PDFs with controls or can add controls to existing PDFs. Further, although not demonstrated here, you can also use iTextSharp to create a PDF document with embedded controls.

Getting Started

In order to get started, fire up the Visual Studio 2005 IDE and open the attached solution. The solution consists of a single Windows Forms project with a single form. I have also included a PDF that will be used for demonstration purposes; this form is the IRS W-4 form completed by US taxpayers. However, any PDF with embedded controls (text boxes, check boxes, etc.) is fair game for this approach. Note that a reference to the iTextSharp DLL has been included in the project.

All of the project code is contained within the single Windows Form. The form itself contains only a docked textbox used to display all of the field names from an existing PDF document. The completed PDF is generated and stored in the local file system; the PDF is not opened for display by the application.

The application uses the existing PDF as a template and from that template, it creates and populates the new PDF. The template PDF itself is never populated and it is used only to define the format and contents of the completed PDF.


Figure 2: Solution Explorer

The Code: Main Form

As was previously mentioned, all of the code used in the demonstration application is contained entirely in the project’s single Windows Form. The following section will describe the contents of the code file.

The file begins with the appropriate library imports needed to support the code. Note that the iTextSharp libraries have been included into the project. The class declaration is in the default configuration.

Imports System
Imports System.Collections
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports iTextSharp
Imports iTextSharp.text
Imports iTextSharp.text.pdf
Imports iTextSharp.text.xml
Imports System.IO

Public Class Form1 

The next section of code contains the Form1 load event handler. During form load, two functions are called. Those functions are used to display all of the fields present in the template PDF and to create a new PDF populated with a set of field values.

''' <span class="code-SummaryComment"><summary></span>
''' Application main form Load event handler
''' <span class="code-SummaryComment"></summary></span>
''' <span class="code-SummaryComment"><param name="sender"></param></span>
''' <span class="code-SummaryComment"><param name="e"></param></span>
''' <span class="code-SummaryComment"><remarks></remarks></span>
Private Sub Form1_Load(ByVal sender As Object, ByVal e As
System.EventArgs) Handles Me.Load

    ' Load all field names from template PDF

    ' Fill the target PDF form with canned values

End Sub

The next section of code contained in the demo application defines a function used to collect the names of all of the fields from the target PDF. The field names are displayed in a text box contained in the application’s form.

''' <span class="code-SummaryComment"><summary></span>
''' List all of the form fields into a textbox. The
''' form fields identified can be used to map each of the
''' fields in a PDF.
''' <span class="code-SummaryComment"></summary></span>
Private Sub ListFieldNames()
    Dim pdfTemplate As String = "c:\Temp\PDF\fw4.pdf"

    ' title the form
    Me.Text += " - " + PdfTemplate

    ' create a new PDF reader based on the PDF template document
    Dim pdfReader As PdfReader = New PdfReader(pdfTemplate)

    ' create and populate a string builder with each of the
    ' field names available in the subject PDF
    Dim sb As New StringBuilder()

    Dim de As New DictionaryEntry
    For Each de In pdfReader.AcroFields.Fields
        sb.Append(de.Key.ToString() + Environment.NewLine)

    ' Write the string builder's content to the form's textbox
    textBox1.Text = sb.ToString()
    textBox1.SelectionStart = 0
End Sub

Figure 3 shows the field names collected from the target PDF using the ListFieldNames function call. In order to map these fields to specific fields in the PDF, one need only copy this list and pass values to each of the fields to identify them. For example, if the form contains ten fields, setting the value (shown next) to a sequential number will result in the display of the numbers 1 to 10 in each of the fields. One can then track that field value back to the field name using this list as the basis for the map. Once the fields have been identified, the application can be written to pass the correct values to the related field.

Checkbox controls may be a little more challenging to figure out. I tried passing several values to the checkbox controls before lining up a winner. In this example, I tried pass 0, 1, true, false, etc. to the field before figuring out that yes sets the check.


Figure 3: The Available PDF Fields

The next section of code in the demo project is used to fill in the mapped field values. The process is simple enough. The first thing that happens is that that the template file and new file locations are defined and passed to string variables. Once the paths are defined, the code creates an instance of the PDF reader which is used to read the template file, and a PDF stamper which is used to fill in the form fields in the new file. Once the template and target files are set up, the last thing to do is create an instance of AcroFields, which is populated with all of the fields contained in the target PDF. After the form fields have been captured, the rest of the code is used to fill in each field using the field’s SetField function.

In this example, the first worksheet and the W-4 itself are populated with meaningful values whilst the second worksheet is populated with sequential numbers that are then used to map those fields to their location on the PDF.

After the PDF has been filled out, the application reads values from the PDF (the first and last names) in order to generate a message indicating that the W-4 for this person was completed and stored.

    Private Sub FillForm()

    Dim pdfTemplate As String = "c:\Temp\PDF\fw4.pdf"
    Dim newFile As String = "c:\Temp\PDF\Final_fw4.pdf"

    Dim pdfReader As New PdfReader(pdfTemplate)
    Dim pdfStamper As New PdfStamper(pdfReader, New FileStream( _
        newFile, FileMode.Create))

    Dim pdfFormFields As AcroFields = pdfStamper.AcroFields

    ' set form pdfFormFields

    ' The first worksheet and W-4 form
    pdfFormFields.SetField("f1_01(0)", "1")
    pdfFormFields.SetField("f1_02(0)", "1")
    pdfFormFields.SetField("f1_03(0)", "1")
    pdfFormFields.SetField("f1_04(0)", "8")
    pdfFormFields.SetField("f1_05(0)", "0")
    pdfFormFields.SetField("f1_06(0)", "1")
    pdfFormFields.SetField("f1_07(0)", "16")
    pdfFormFields.SetField("f1_08(0)", "28")
    pdfFormFields.SetField("f1_09(0)", "Franklin A.")
    pdfFormFields.SetField("f1_10(0)", "Benefield")
    pdfFormFields.SetField("f1_11(0)", "532")
    pdfFormFields.SetField("f1_12(0)", "12")
    pdfFormFields.SetField("f1_13(0)", "1234")

    ' The form's checkboxes
    pdfFormFields.SetField("c1_01(0)", "0")
    pdfFormFields.SetField("c1_02(0)", "Yes")
    pdfFormFields.SetField("c1_03(0)", "0")
    pdfFormFields.SetField("c1_04(0)", "Yes")

    ' The rest of the form pdfFormFields
    pdfFormFields.SetField("f1_14(0)", "100 North Cujo Street")
    pdfFormFields.SetField("f1_15(0)", "Nome, AK 67201")
    pdfFormFields.SetField("f1_16(0)", "9")
    pdfFormFields.SetField("f1_17(0)", "10")
    pdfFormFields.SetField("f1_18(0)", "11")
    pdfFormFields.SetField("f1_19(0)", "Walmart, Nome, AK")
    pdfFormFields.SetField("f1_20(0)", "WAL666")
    pdfFormFields.SetField("f1_21(0)", "AB")
    pdfFormFields.SetField("f1_22(0)", "4321")

    ' Second Worksheets pdfFormFields
    ' In order to map the fields, I just pass them a sequential
    ' number to mark them once I know which field is which, I 
    ' can pass the appropriate value
    pdfFormFields.SetField("f2_01(0)", "1")
    pdfFormFields.SetField("f2_02(0)", "2")
    pdfFormFields.SetField("f2_03(0)", "3")
    pdfFormFields.SetField("f2_04(0)", "4")
    pdfFormFields.SetField("f2_05(0)", "5")
    pdfFormFields.SetField("f2_06(0)", "6")
    pdfFormFields.SetField("f2_07(0)", "7")
    pdfFormFields.SetField("f2_08(0)", "8")
    pdfFormFields.SetField("f2_09(0)", "9")
    pdfFormFields.SetField("f2_10(0)", "10")
    pdfFormFields.SetField("f2_11(0)", "11")
    pdfFormFields.SetField("f2_12(0)", "12")
    pdfFormFields.SetField("f2_13(0)", "13")
    pdfFormFields.SetField("f2_14(0)", "14")
    pdfFormFields.SetField("f2_15(0)", "15")
    pdfFormFields.SetField("f2_16(0)", "16")
    pdfFormFields.SetField("f2_17(0)", "17")
    pdfFormFields.SetField("f2_18(0)", "18")
    pdfFormFields.SetField("f2_19(0)", "19")

    ' report by reading values from completed PDF
    Dim sTmp As String = "W-4 Completed for " + _
    pdfFormFields.GetField("f1_09(0)") + " " + _
    MessageBox.Show(sTmp, "Finished")

    ' flatten the form to remove editting options, set it to false
    ' to leave the form open to subsequent manual edits
    pdfStamper.FormFlattening = True

    ' close the pdf

    End Sub

End Class

To finish up the PDF, it is necessary to determine whether or not additional edits will be permitted to the PDF after it has been programmatically completed. This task is accomplished by setting the FormFlattening value to true or false. If the value is set to false, the resulting PDF will be available for edits, but if the value is set to true, the PDF will be locked against further edits. Once the form has been completed, the PDF stamper is closed and the function terminated. That wraps up the discussion of the form-based demo project.


This article described an approach to populating a PDF document with values programmatically. This functionality was accomplished using the iTextSharp DLL. Further, the article described an approach for mapping the fields contained in a PDF and may be useful if one is dealing with a PDF authored elsewhere and if the programmer does not have access to Adobe Professional or Adobe Designer.

The iTextSharp library is a powerful DLL that supports authoring PDFs, as well as using them in the manner described in this document. However, when authoring a PDF, it seems that it would be far easier to produce a nice document using the visual environment made available through the use of Adobe tools. Having said that, if one is dynamically creating PDFs with variable content, the iTextSharp library does provide the tools necessary to support such an effort. With the library, one can create and populate a PDF on the fly.


  • 22 January, 2008 -- Original version posted


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Author

Software Developer (Senior)
United States United States
No Biography provided

Comments and Discussions

QuestionHow to add another page? Pin
Member 145746814-Sep-19 17:05
MemberMember 145746814-Sep-19 17:05 
GeneralMy vote of 5 Pin
bobonlinetsl1-Feb-16 3:58
Memberbobonlinetsl1-Feb-16 3:58 
GeneralMy vote of 5 Pin
Arkitec25-Aug-14 11:20
professionalArkitec25-Aug-14 11:20 
QuestionHow to add a signature to a signature defined field for the pdf ? Pin
Member 107366893-Jun-14 5:08
MemberMember 107366893-Jun-14 5:08 
QuestionTHanks Pin
Alvin Garay2-Oct-13 16:43
MemberAlvin Garay2-Oct-13 16:43 
AnswerThanks, works fine Pin
kspalteholz10-Sep-13 5:45
Memberkspalteholz10-Sep-13 5:45 
QuestionIssue in VB 2010 Pin
Member 1024083629-Aug-13 8:46
MemberMember 1024083629-Aug-13 8:46 
AnswerRe: Issue in VB 2010 Pin
Daniel F Lee7-Sep-15 5:24
MemberDaniel F Lee7-Sep-15 5:24 
QuestionPrint file after it is filled Pin
flyinghorse30128-Sep-12 9:18
Memberflyinghorse30128-Sep-12 9:18 
GeneralMy vote of 5 Pin
Manoj Kumar Choubey5-Jul-12 4:12
professionalManoj Kumar Choubey5-Jul-12 4:12 
BugNot working Pin
Md Kamruzzaman Sarker27-Jun-12 6:02
MemberMd Kamruzzaman Sarker27-Jun-12 6:02 
QuestionGracias! Thanks! Pin
raulcigil23-May-12 0:24
Memberraulcigil23-May-12 0:24 
QuestionPDF form designer PinPopular
shakilmavati18-Feb-12 2:21
Membershakilmavati18-Feb-12 2:21 
QuestionGreat piece of Code Pin
eccharbonnet9-Feb-12 12:46
Membereccharbonnet9-Feb-12 12:46 
QuestionHow can i add an image in a pdf field? Pin
IMMujeeb27-Dec-11 10:29
MemberIMMujeeb27-Dec-11 10:29 
QuestionHow to ?? Pin
jamaicanbg6-Dec-11 3:50
Memberjamaicanbg6-Dec-11 3:50 
QuestionHas anyone successfullly used this with MCF? Pin
Member 34553985-Dec-11 9:11
MemberMember 34553985-Dec-11 9:11 
QuestionI need vice a versa Pin
mayur csharp G7-Nov-11 20:47
Membermayur csharp G7-Nov-11 20:47 
Questionfont size Pin
bil7529-Sep-11 12:50
Memberbil7529-Sep-11 12:50 
QuestionAnother programming error message... Pin
John Mobley20-Dec-10 14:38
MemberJohn Mobley20-Dec-10 14:38 
AnswerRe: Another programming error message... Pin
Tate Antrim9-Aug-11 16:16
professionalTate Antrim9-Aug-11 16:16 
AnswerRe: Another programming error message... Pin
Daniel F Lee7-Sep-15 5:32
MemberDaniel F Lee7-Sep-15 5:32 
Generalcannot open the new created pdf file Pin
gee sann10-Sep-10 7:58
Membergee sann10-Sep-10 7:58 
GeneralConverting Error Message Pin
Yu Sung Chang5-Sep-10 7:22
MemberYu Sung Chang5-Sep-10 7:22 
GeneralRe: Converting Error Message Pin
Yu Sung Chang19-Sep-10 14:43
MemberYu Sung Chang19-Sep-10 14:43 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.