Problem with Windows Mobile 5.0 Pocket PC & CloseHandle - Mobile Discussion Boards

Send SMS Through Mobile Phone From Within My PC

ungmonirath@gmail.com31-Dec-05 21:54

31-Dec-05 21:54

Dear all,

I am a University Student. I am doing research on Web Service. My Topic is sending SMS, Short Message Service From Within My PC. Now, I got a problem of sending SMS using .NET Framework. Could please anyone giving me some ideas or sending my some code sample????

Thank you in advanced.

CamMan D'Oh! | :doh:

how to set power state on a PDA (vb.net)

PGT22-Dec-05 23:09

PGT

22-Dec-05 23:09

Hi i'm creating an app because my pda has been power drained to often.
Now i want to create an application in which i can make it suspend or turn off based on power levels and also based on selected bateries.

Now i can read out the batery status(es) in vb.net (took me a while but it works now).

Confused | :confused:

I now am into the problem of setting suspend/shutdown action to the PDA device. Confused | :confused:

how to do that ??

it should be done trough vb.net 2003 code.

------
Any help will be great, it will become a free application. As i can imagine more people have those powerdrain problems with PDA's.

====================================
jipijee

Re: how to set power state on a PDA (vb.net)

Jumba66663-Feb-06 10:24

Jumba6666

3-Feb-06 10:24

you might be using this but OpenNetCF takes care of the levels of the batteries in a couple controls.
OpenNETCF.Windows.Forms.BatteryLife
OpenNETCF.Windows.Forms.BatteryMonitor
OpenNETCF.Windows.Forms.PowerStatus

It does not include a way to power off the device. If your problem is memory loss get a Mobile 5 unit and a backup battery to switch out.

hope this helps even if it does not fix your problem.

Tim

Re: how to set power state on a PDA (vb.net)

PGT4-Feb-06 3:48

PGT

4-Feb-06 3:48

Thanks alltough i don't know about openNETCF (new to me).
My problem is not reading out battery status, i can do that
(there's a sample on the MSDN site which allows one to program that).

my device is a asus 620BT, it has no backup power, and looses everything, each time. Since the included auto backup software doesn't work allways.
While Asus doesn't seam to do anything about this, i allready have heard more people with this problem. So then came the idea of monitoring power and when below xxx% switch the device of. Perhaps with BeeB or somehing like that.

D'Oh! | :doh:

jipijee

Any utilities for EVC/PB like Visual Assist X for VC++?

DavidHawk22-Dec-05 19:34

DavidHawk

22-Dec-05 19:34

Hello, everybody,

I'm a newbie to WinCE. Does anybody know any plugins for EVC/PB like Visual Assist X for VC++?
Thanks a lot!

David

displaying image from sql ce to Picture box in dot net compact framework

ayrookuzhy22-Dec-05 0:40

ayrookuzhy

22-Dec-05 0:40

Hi
Can you please provide an idea how to diplay the image saved in the sql ce as image to the picture box using vb dot net compact frame work. Please provice sample code too.

Aruj

memory layouts on mobile phones

popeyesfx21-Dec-05 0:57

popeyesfx

21-Dec-05 0:57

does anyone now how to get the internal memory layout for a mobile. I have a M1500 from orange and have been experimenting with custom images and need to dump the disc n chip to and sd card anyone got any ideas

Problem with Windows Mobile 5.0 Pocket PC & CloseHandle

cbusgut19-Dec-05 4:16

cbusgut

19-Dec-05 4:16

Hello all

I was testing an application developed for Pocket PC 2003 into other PDA with windows mobile 5.0. However, I found a problem. When I opened the serial port (a GPS port) for the first time it works well. Even when I do it in a second time. But at the first time the CreateFile function fails, giving the following error:

"The network resource or the specified device are not longer available"

and I have to soft reset the PDA to be able to use that port again.

After that, I tried with commercial applications for PocketPC and I found the same behaviour. Finally, I decided to try with the TTY sample of the Windows Mobile 5.0 Pocket PC SDK (specially designed for this OS) and it happens the same!

Any comments or ideas?

DataAdapter.Update Mehtod

slirek17-Dec-05 21:54

slirek

17-Dec-05 21:54

Hi All!
I use RemoteDataAccess in my application. To get new data from sql server 2000 I use Pull method. Here is some problem: i must drop table before rda.pull method starts. Sometimes problems with connection occur and i lose data. I decided to make backup database and if it needs, i must get data from this database. At first I return DataTable object from backup base received with query "select * from tablename". At second I create table in working base. Then I want use DataAdapter object (Fill method) to create DataSet. I want make infill dataset (necessary table). But code doesn't work. Here's my code (newTbl - datatable from backup) :

Dim myAdap As New SqlCeDataAdapter("select * from tbl", myConnection)
Dim ds As New DataSet
myAdap.Fill(ds, "tbl")
Dim i As Integer
For i = 0 To newTbl.Rows.Count - 1
ds.Tables(tbl).ImportRow(newTbl.Rows(i))
Next
myAdap.Update(ds.Tables("tbl"))

Here's no errors, but table in working base has not rows. Help with advices!!! Thanks!

Hide/Disable Start Menu - Pocket PC

Abraham Kurian9-Dec-05 20:47

Abraham Kurian

9-Dec-05 20:47

How Can I Hide/Disable Pocket PC Start Button & Taskbar using C#(Visual Studio 2005)

Thanks

.net CF/PocketPC problem with PictureBox controls

garbeechio9-Dec-05 7:05

garbeechio

9-Dec-05 7:05

...and most notably their back color property.

I'm using the following code to create instances of picture boxes and display them on a device running PocketPC 2002.

Dim myPic As New PictureBox<br />
       myPic.Location = New Point(32, (picCount * 35))<br />
       picCount += 1<br />
       myPic.Size = New Size(53, 35)<br />
       myPic.Text = "newPic" & CStr(picCount )<br />
       myPic.BackColor = Color.Black<br />
       myPic.Text = "HERE" & picCount <br />
        <br />
       '---add the button to the form<br />
       Me.Controls.Add(myPic)<br />

As you can see there are no images in the pictureboxs right now, that in inconsequential regarding the problems that I'm having right now, basically my problem is simply that the pictureBox control will not reflect that its backColor property has been changed to black. Is this a known issue with the .NET CF? Or am I not creating the control correctly?

Big thanks in advance for your help.

BMW

-- modified at 11:47 Monday 12th December, 2005

Pocket PC + Interbase

bbbilen9-Dec-05 2:17

bbbilen

9-Dec-05 2:17

Hello,

We have a database application written in Borland C++, and using Interbase, Now we need to add 3 pocket pcs to the system. I couldnt find a way to connect database from pocketpc so I made a webservice in c#, I am connecting database from webservice and getting data from webservice to pocketpc. Is there a way to directly connect to database from pocketpc.

Because when I use webservice and run the webservice. Other clients cannot connect to the database, I get error another process is using the database file.

In webservice I am using firebird/interbase NET provider.

thanks

Can't find an Entry Point 'MyFunction' in a PInvoke DLL 'MyDLL.dll'

vic120007-Dec-05 14:17

vic12000

7-Dec-05 14:17

Hi Experts,

I have a DLL built in C++ and am trying to make it work on PocketPC.
I created a project and build the DLL for PocketPC: in VS2005
New Project--->VC++-->Smart Device --> Win32 Smart Device Project (Platforms
choose "Pocket PC 2003" and Application Settings choose "DLL")
and the DLL was successfully built.

Then i created another project, to built a application in C#:
New Project--->C#-->Smart Device (Pocket PC 2003) --> Device Application

in the application, i used
[DllImport("MyDLL.dll", EntryPoint = "MyFunction")]
private static extern bool MyFunction(......)

The 2 projects were built in one Solution.
When i tried to "Deploy Solution" under Build, i can find that only the DLL
was deployed into the device. I need to "Deploy DeviceApplication" to deploy
the application.

After i deployed the DLL and the application,
i debug the application, at the place when i call MyFunction, there is error:
Can't find an Entry Point 'MyFunction' in a PInvoke DLL 'MyDLL.dll'

I also tried to use:
[DllImport(strDllPath)]
in my application, but i have the same error.

On Desktop, the DLL and the were called in the same way and worked well
before.

The function in the DLL was implemented as:
extern "C" bool MyFunction(......)
{
}
and it was exported in DeviceApplication.def

Does any one has any idea why i have this problem and how can i solve the
problem?

Thank you very much!

Vic

Thanks!

vic

ADOCE31.TLB

gerhard456-Dec-05 10:12

gerhard45

6-Dec-05 10:12

Can anyone tell me, how I can obtain adoce31.tlb, required to build the contribution: "Porting Carlos Antollini's ADO classes to the Pocket PC ( J P Figueira)" ???

Re: ADOCE31.TLB

SpeBeeTo7-Dec-05 3:33

SpeBeeTo

7-Dec-05 3:33

If you don't have adoce31.tlb, you can replace it with adoce31.dll:

#import "C:\Windows CE Tools\wce300\Pocket PC 2002\dataaccess31\target\arm\adoce31.dll" rename_namespace("ADOCG") rename("EOF", "EndOfFile")using namespace ADOCG;

Re: ADOCE31.TLB

gerhard457-Dec-05 8:51

gerhard45

7-Dec-05 8:51

Thanks a lot. However I am using eVC++4.0 and when attempting to build J P Figueras AdoSample, it is complaining about the COle classes. When including afxdisp.h, I get the message: Can't build MFC OLE projects using static MFC libraries. Of course defining _AFXDLL brings up Unresolved External WinMain.

Do you know any way to get this running with eVC++4.0?

Thanks a lot

Combobox

SpeBeeTo5-Dec-05 10:23

SpeBeeTo

5-Dec-05 10:23

Hi. I have a Combobox "Type" and have the list there. I want to show the results of the entry from the combobox into a text.

For example,
I pick "Fruit" from the combobox.
I want to display on the screen: "This food is a Fruit"
If I pick "Vegetable" from the combobox, it will display:
"This food is a vegetable"

Right now, I'm getting:

"This food is a 2"

How can I make the 2 into Vegetable?

This is what I have, and I have a feeling it has to do with the GetValue and/or GetOrdinal.... I just can't seem to get it to work.... Frown | :(

TypeLabel.Text = rReader.GetValue(rReader.GetOrdinal("MovieType")).ToString();

Thanks as always... Sorry for such a dumb question. Sniff | :^)

Installing a web app on PDA

pk123us4-Dec-05 19:22

pk123us

4-Dec-05 19:22

Hi All,
Greetings to everyone...

I need a help .. Will greatly appreciate the response.

Problem: I have a web based application (ASP.net, C# and SQL server). I want to install and run that application on my PDA. Is it possible to do that?

Can it be done without any change to the existing application runing on my localhost?

Please help.

Thanks and Regards,

PK

Re: Installing a web app on PDA

SpeBeeTo7-Dec-05 3:18

SpeBeeTo

7-Dec-05 3:18

pk123us wrote:
Can it be done without any change to the existing application runing on my localhost?

Doubtful. Try it and see and post your results!

M.

Displaying an Image in an SQL CE Server application

SpeBeeTo4-Dec-05 13:00

SpeBeeTo

4-Dec-05 13:00

Hello,

This is the first time I've posted anything, but I'd like to thank everyone for all the wonderful infos they have posted. I realy have learned a lot.

I am working on a program that has been modified from Brian Nash's "Compact Framework Movie Collection Manager". He (and I) uses SQL Server CE and C#, but I would like to add an image to the database. Basically, all I want to accomplish is that an image is displayed for a particular "Movie ID."

I searched on the internet and found the following snippet:

1. Create Database - did that -- no problem.

2. Create Table using ExecuteNonQuery()
string sqlCreateImageTable = "CREATE TABLE Photos (photoID int IDENTITY (1, 1) NOT NULL,"
+ "name nvarchar(50) NULL, photo image NULL)";

Added this, no problem (no errors)

3. Read bytes of Image from FileStream
FileStream fs = new FileStream(photoPath, FileMode.Open);
int photoLength = (int)fs.Length;
byte[] photoBytes = new byte[photoLength];
int n = fs.Read(photoBytes, 0, photoLength);

Not sure where to add this......

4. Insert Image into Sql Ce
string connectionString = @"Data Source =\PhotoAlbum.sdf";
SqlCeConnection oConn = new SqlCeConnection(connectionString);

oConn.Open();
SqlCeCommand oCmd = oConn.CreateCommand();
oCmd.CommandText = "INSERT INTO Photos (name, photo) VALUES (?, ?)";

Added this, no problems (i.e. no errors) here.....

oCmd.Parameters.Add("name", label3.Text);
oCmd.Parameters.Add("photo", SqlDbType.Image).Value = photoBytes;

Added this, but since I don't have an image, I don't see anything. (??)

oCmd.Prepare() ;
int rows = oCmd.ExecuteNonQuery();
oConn.Close();

But it doesn't seem to work quite well. I am having problems in Step 3..... (particularly photoBytes)....

Any help would be greatly appreciated. If I'm too vague, I'm sorry. I'm a newbie at this C# thing and am just starting with SQL stuff. I've been mainly an HTML/Perl/CSS type of programmer. This is, by far, the toughest code I've worked on. Don't cut me down for my lack of knowledge!

Thanks,

M.

No user control in .NET compact framework?

beeyung2-Dec-05 22:53

beeyung

2-Dec-05 22:53

Hello, I am a beginner in writing pocketpc applications. Sigh | :sigh:

I am writing an application that has several levels of pages.
When the program starts, there would be a main page for user to choose his choices on a form. When clicked on certain link, can I show the new form/page at the same form? (Like webpages)

I can do it by placing different new pages in different user controls in normal Windows C# program. In this way, I can easily manage the different pages and "new" one when used. However, I found there is no such "user control" in C# compact one. Is it meant that I have to put everything (every new panel) on the same form?
Confused | :confused:

-- modified at 4:54 Saturday 3rd December, 2005

quick newby .NET compact framework question

garbeechio1-Dec-05 8:06

garbeechio

1-Dec-05 8:06

I'm a newby to mobile development and was needing a hand figuring out how to load images into a pictureBox control at runtime, I had originally solved the problem using an imageList but decided the constraint of having a uniform size for each image in the list was not even close to ideal.

Thanks a bundle in advance for your help.
BMW

StrongARM/xScale processor support

Bartosz Bien30-Nov-05 0:47

Bartosz Bien

30-Nov-05 0:47

I have developed a Win CE 5.0 application using eMbedded Visual C++ 4.0 SP4. It runs fine on both Windows CE .NET 4.1 and Windows CE 5.0 emulators. I compiled the ARM version using ARMV4 configuration, but the resulting executable does not work on the StrongARM IPAQ 3870 neither on the xScale MDA compact / PXA272. Any suggestions?

Regards,
BB
http://spin.bartoszbien.com

AutoRun feature on Windows CE

Bartosz Bien30-Nov-05 0:27

Bartosz Bien

30-Nov-05 0:27

I would like to activate the autorun feature for my CAB installers created with CabWiz (it has four cabinets, one for each platform). I know there should be several autorun.exe files located in \storage card\<cpu>\autorun.exe, where <cpu> is the winnt.h definition value of the target processor. The question is: what code should I compile into autorun.exe? Unsure | :~

Regards,
BB
http://spin.bartoszbien.com

-- modified at 6:27 Wednesday 30th November, 2005

Difference between software timer and Hardware timer

badal_akr29-Nov-05 23:45

badal_akr

29-Nov-05 23:45

Hi everybody I am working on embedded systems and came to know about the timer importance in this area.
I get puzzled sometime by the software timers, why they are good compare to HArdware timer and interrupts as why they do save the Change in the CPU states.
Can anybody educate me on this more.
Regards

Anil Kumar

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.