Re: Difference between System process and Administrator process - C / C++ / MFC Discussion Boards

Ryan Binns27-Jul-03 4:50

27-Jul-03 4:50

Michael Dunn wrote:
AFAIK, from an application's point of view, a HT CPU looks the same as two non-HT CPUs.

Yeah, I'm pretty sure that's the way it's supposed to look Smile | :)

Ryan

"Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"

Re: Hyperthreading

ColinDavies27-Jul-03 22:34

ColinDavies

27-Jul-03 22:34

Mike,
Since you have replied I have been looking into this.
As wb (below) suggests their could be some problems.
A threaded app may actually end up running slower on a hyperthreaded CPU. What I am looking for is some sort of a guideline as to what would cause said bottlenecks to occur.
Possibly it appears that hyperthreading is really more use at the multitasking rather than multithreading.
I envisage that you could set up one set of guidelines for the current XEON processor, and then with the next generation the rules will have changed.
Really I must get a hyperthreaded CPU to run my own tests, and try to create the bottlenecks. At the moment my interest is more academic then anything else.

Regardz
Colin J Davies

* WARNING *
This could be addictive
The minion's version of "Catch Green Alien | [Alien] "

It's a real shame that people as stupid as you can work out how to use a computer. said by Christian Graus in the Soapbox

Re: Hyperthreading

wb27-Jul-03 4:47

27-Jul-03 4:47

with SimultaneousMultiThreading (or Intel: HT ) you can gain a lot of spead up, but there is stil one CPU with one cache, one set of registers ..... sometimes its even slower then on a normal CPU becaus of CacheTrashing (if two different threads have a mem block , which is mapped to the same cacheline in the CPU cache)
then you have to download VTune from Intel Smile | :)

it helps you to find such bottlenecks.

Re: Hyperthreading

ColinDavies27-Jul-03 22:40

ColinDavies

27-Jul-03 22:40

What you are saying makes sense to me.
HT must have a cost, and at some stage there will be a bad return on usage. I guess it would be possible to spawn countless threads to find where this happened. There are now 3 Levels of cache, and I guess one must hold the main mapping of activity.
I actually think hyperthreading is quite exciting, its a bit like a brain having its own smaller brain to control itself.

Regardz
Colin J Davies

* WARNING *
This could be addictive
The minion's version of "Catch Green Alien | [Alien] "

It's a real shame that people as stupid as you can work out how to use a computer. said by Christian Graus in the Soapbox

Difference between System process and Administrator process

Hashim Saleem27-Jul-03 0:46

Hashim Saleem

27-Jul-03 0:46

Hi all,

I have a two part application.

1. Windows 2000 Service
2. A MFC dialog based GUI application to configure the service.

I am communicating between Service and GUI app through file mapping. The problem is service part has created the file and weh GUI app tries to access the file, I am getting error "Access is denied".

Is there any right conflict between system process (service) and user process(GUI app). I am logged through "Administrator".

Any urgent help is neeeded.
regards.

Re: Difference between System process and Administrator process

Michael Dunn27-Jul-03 0:50

Michael Dunn

27-Jul-03 0:50

When you create the file mapping object, you need to specify a DACL -- the LPSECURITY_ATTRIBUTES parameter that you usually leave NULL to use the default DACL. The trouble with that is that the default DACL for code running as the system account is highly secured, to prevent tampering by other processes.
You'll need to create a DACL that grants access to your admin account, or the admins group.

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
aef392rDFA#@(#*@%@#$Rfa39f3fqwf--=
NO CARRIER

Re: Difference between System process and Administrator process

Hashim Saleem27-Jul-03 1:15

Hashim Saleem

27-Jul-03 1:15

Thank you very much. But can you give here an example of creating our own DACL to grant access to admin account or is there any article regarding this on this forum?

Thanks

Hashim Saleem

Re: Difference between System process and Administrator process

Michael Dunn27-Jul-03 2:10

Michael Dunn

27-Jul-03 2:10

I only know that DACLs are bloody cumbersome to deal with. Frown | :(

Try starting with this search[^] to find articles on the subject.

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
Latest art~!@#2rDFA#@(#*%$Rfa39f3fqwf--=
NO CARRIER

activex container test with my project

shinay26-Jul-03 22:58

shinay

26-Jul-03 22:58

I am trying to debug my activex control using tstcon
(activex control test container). Seems there is a
problem. This is the control to display graphics
Before it(my activeX control) shows some grahpics,
I need my project to load some data. I don't know
how to combine this tstcon with my project.
someone has done this before?

Thank you for the help in advance.
shin

rebuild all?

novachen26-Jul-03 22:48

novachen

26-Jul-03 22:48

Hi!
I have worked on vc for around 2 years. Sometimes i face very weird bug, and spend several hours to check it but find all logical is correct. After i try rebuild all, all bugs disappear. Today i meet this problem again (i just change a #define).
Would you please tell me when we should rebuild all the project? Why there is such weird bug?
Thanks!

Re: rebuild all?

novachen26-Jul-03 22:52

novachen

26-Jul-03 22:52

In my feel, the misfunction project work like some part be refreshed(by my edit) and some others are still old state.
Doesn't visual studio check the date and their depend relation?

Re: rebuild all?

Beer2627-Jul-03 5:03

Beer26

27-Jul-03 5:03

pretty sure visual cpp will only build what it considers to be old files when you build, then relinks.

sometimes it misses files that were modified, and simply links the old object files.

to answer your question, rebuild all when it doesn't work, and you have to.

SYSTEMTIME question

YaronNir26-Jul-03 22:27

YaronNir

26-Jul-03 22:27

Hi all,

This was taken from the MSDN:

"It is not recommended that you add and subtract values from the SYSTEMTIME structure to obtain relative times. Instead, you should

1) Convert the SYSTEMTIME structure to a FILETIME structure.
2) Copy the resulting FILETIME structure to a ULARGE_INTEGER structure.
3) Use normal 64-bit arithmetic on the ULARGE_INTEGER value. " .....

i have the local time stored in SYSTEMTIME format.
i've done 1+2. now i have an __int64 to store the SYSTEMTIME.

i want to add a week (7 days) to this ularge_integer....how do i do that?

does the _int64 represents the number of seconds till today???
can any1 help?

thanks in advanced
Yaron

Re: SYSTEMTIME question

Michael Dunn26-Jul-03 22:35

Michael Dunn

26-Jul-03 22:35

A FILETIME holds 100 ns intervals, ie adding 1 to a FILETIME increases the time by 10^-7 seconds. So 7 days = 10000000 * 60 * 60 * 24 * 7

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
aef392rDFA#@(#*@%@#$Rfa39f3fqwf--=
NO CARRIER

Re: SYSTEMTIME question

YaronNir27-Jul-03 4:41

YaronNir

27-Jul-03 4:41

thanks

i also discovered (based on experiment only) that whilst using SYSTEMTIME
(without converting to FILETIME) adding 1400 to the higher value of the DWORD will do the trick for me....

i guess in a math way 1400 related to the 10000000x60x60x24x7 somehow Wink | ;)

thanks again for reply

Yaron

Re: SYSTEMTIME question

YaronNir27-Jul-03 4:45

YaronNir

27-Jul-03 4:45

wooooppppssss

sorry what i ment to say is to add the 1400 to the higher value of the FILETIME as follows:
SYSTEMTIME st;
FILETIME ft;
GetLocalTime(&st);
SystemTimeToFileTime(&st,&ft);
ft.dwHighDateTime += 1400;// adding the 7 days

i think your way was to work on the ULARGE_INT i.e __int64 i.e:
__in64 uli;
memcpy(&uli,&ft,sizeof(uli));
uli += 10000000x60x60x24x7;

and then convert it again to FILETIME with memcpy:
memcpy(&ft,&uli,sizeof(ft));

am i correct?

Ask not what your application can do for you,
Ask what you can do for your application

Re: SYSTEMTIME question

Michael Dunn27-Jul-03 11:27

Michael Dunn

27-Jul-03 11:27

Well, you were fudging the calculation, not doing it exactly like I was. Wink | ;)

10000000x60x60x24x7 = 0x0580 28E4 4000

0x580 == 1408, so you were close

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
Latest art~!@#2rDFA#@(#*%$Rfa39f3fqwf--=
NO CARRIER

ATL in vs.net

novachen26-Jul-03 21:29

novachen

26-Jul-03 21:29

Hi!

I find in vs.net impossible to use user defined type for function parameter.

In the COM function i declare some user defined type. for example

typedef unsigned char d8u;

in vc6, i only need include a header descriping d8u in the idl file.
But in vs.net, i create a ATL control, find the idl file is dynamic generated when you compile it. Not a static file as in vc6 that you can edit it manually. And it will never include the header i need, so there are always error of shorting of such type.

Why vs.net take this solution? is there any place i can make midl to include the header?

I have blocked there for 2 days. If there isn't a good solution i have to reinstall vc6 to work. sigh...

Any idea,pals?

Re: ATL in vs.net

Michael Dunn26-Jul-03 22:37

Michael Dunn

26-Jul-03 22:37

You don't have to use attributes - there's a checkbox in the AppWizard that controls whether the project uses attributes or the VC 6 style with the IDL and other files.

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
aef392rDFA#@(#*@%@#$Rfa39f3fqwf--=
NO CARRIER

Calculate the required size of text to fit in column

drabudawood26-Jul-03 20:39

drabudawood

26-Jul-03 20:39

How can I calculate the required size of text which can be placed in one column of CListCtrl object and fits in.

when I tried to use the next code, some text did not appear all, I get three dots at the end of the appeared text on the column.

Can you help me please what is wrong with code ?

void CMyDialogDlg::AdjustColSize(int ColNo,CString s)
{
CClientDC dc(this);
CSize sz;
CFont *f = m_ListControl.GetFont();
dc.SelectObject(f);
sz = dc.GetTextExtent(s,_tcslen(s));
sz.cx += GetSystemMetrics(SM_CXBORDER);

if( width[ColNo] < sz.cx )
{
m_ListControl.SetColumnWidth(ColNo,sz.cx);
width[ColNo]=sz.cx;
}

}

Dr Abudawood

Re: Calculate the required size of text to fit in column

Michael Dunn26-Jul-03 22:42

Michael Dunn

26-Jul-03 22:42

Use LVM_GETSTRINGWIDTH to get the width in pixels of a string. The docs say:

If you use the returned string width as the column width in the LVM_SETCOLUMNWIDTH message, the string will be truncated. To retrieve the column width that can contain the string without truncating it, you must add padding to the returned string width.

so you have to fudge the return value by a few pixels (I guess the exact number depends on the font, bigger font means more padding).

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
aef392rDFA#@(#*@%@#$Rfa39f3fqwf--=
NO CARRIER

Re: Calculate the required size of text to fit in column

drabudawood27-Jul-03 1:32

drabudawood

27-Jul-03 1:32

Tanke you very mush Mr .Michael Dunn for your help. And I'll try to do your advice.

Dr Abudawood

Re: Calculate the required size of text to fit in column

drabudawood27-Jul-03 1:44

drabudawood

27-Jul-03 1:44

Now I got the answer. after your help it was very easy as next:
void CTestScrolDlg::AdjustColSize(int ColNo,CString s)
{
//Global variable Array width[ColNo]

int Gab = 15;
int size=m_ListControl.GetStringWidth(s)+Gab;
if( width[ColNo] < size )
{
m_ListControl.SetColumnWidth(ColNo,size);
width[ColNo]=size;
}
};)

Dr Abudawood

Re: Calculate the required size of text to fit in column

Michael Dunn27-Jul-03 2:14

Michael Dunn

27-Jul-03 2:14

I just realized this, but if you want the column to be wide enough to show all strings in the column, use the LVSCW_AUTOSIZE or LVSCW_AUTOSIZE_USEHEADER value with LVM_SETCOLUMNWIDTH.

--Mike--
Ericahist | Homepage | RightClick-Encrypt | 1ClickPicGrabber
Latest art~!@#2rDFA#@(#*%$Rfa39f3fqwf--=
NO CARRIER

Problem with outp() in vc6.0

funwey26-Jul-03 19:44

funwey

26-Jul-03 19:44

I am attempting to use the parallel port for output control. I thus write a simple code to test the outp() as follow:

#include <conio.h>

void main (void)
{ int i;

i = outp(888,1);
}

VC6.0 returned the followign error msg :
error LNK2001: unresolved external symbol _outpw

Would appreciate any help to solve this. Thanks!!

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.