|
sorry i want to open it in CSV format when i am opening the file not in any other format.
|
|
|
|
|
It's opened based on the mapped application for that extension on the user's computer.
|
|
|
|
|
it's not your problems.. you can configure it by going to tools/Folder Options navigate to File Types locate the xls format and click advance and check the BROWSE IN SAME WINDOW and remove confirm open after download
Best Regards,
Haissam Abdul Malak
My Blog
|
|
|
|
|
Hi Friends,
I am having a problem. I have been working in web application and its taking too long time( as an experiment I used a stopwatch to get the time 20 seconds ...  ) http://colspace.sytes.net:999/rdemo/[^]
I veryfied the time it takes in server side ... its 0.01-0.02 seconds.(The time gap between page_load and pre_render)
But in client side starting from the HTML line 1 to end of the HTML its taking almost 18-20 seconds.
Can anyone please tell me what are the steps can be taken to load page faster in browser?
I have been using
1. ASP.NET 2.0
2. Master pages.
3. ICallBackEventHandler
4. The home page thats taking 20 seconds is having lots of images and sizes sumes upto 150 KB.
Thanks in advance,
Arindam
|
|
|
|
|
Have you tried a profiler?
The problem seems to be the number of images on your home page.
|
|
|
|
|
What is Profilers .NET? I am not quite aware of it. If you can give me bit more info regarding this profiler it would be much helpfull.
And images part I have beening working on. Trying to reduce the image size.
Anyway Thanks for the suggestion 
Arindam
|
|
|
|
|
|
|
hi all,
am developeing a webportal ,inthis application i do provided login,regestration ........pages.I want to have a feature that when ever a new user regestered in our portal ,the regestered informtion(some information like his name,address...) must send to my mobile as sms .
could anybody sujjest the solution or plz let know some URL's regording this issue....!
yuvachandra
|
|
|
|
|
|
thanqs for replay...!
but the stuff u given not working properly man....could u suggest any better approch...plz,it's urgent for me..
|
|
|
|
|
Hello technicals
i m new to crystal reports,so i dont even know
"How can i display 20 records in detail section per page in crystal reports."
From one of the site i come to know that
First create a record counter.
Then change the format option of the detail area and choose a formula on new page before. The result has to be true: {#Counter} = 20
but i dont even know
"How to create a record counter in crystal reports.And also how to set its value."
pls guide me...
|
|
|
|
|
hi all,
i want to upload files or folders on my server with the use of drag and drop functionality. the files may be one by one draged and droped in a listbox where the whole path of the files should get copied. and then on pressing upload button all the files listed in list box should be uploaded on my server.
pls give me code for the same. its urgent.
i am using VS-2005, asp.net,vb.net
thanks in advance for help.
regards,
gauri
|
|
|
|
|
hi all .
iam a new user of this site. if anyone kindly send me some basics or site address featuing how to design any web mail server like yahoo, rediff etc. using .net and how much time it require to design a simpler one
prashant jain malviya national institute of technology
|
|
|
|
|
HI
I have got some error while connecting Sql Server 2000 from ASP.NEt 2.0
i.e My ASP.NET Application and SqlServer 2000 are avaliable in diffrent machine.I remotly connecting the sql server 2000.
I am getting the following error
"System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at _Default.click_Click(Object sender, EventArgs e) in d:\WebSite2\Default.aspx.cs:line 27"
Please send me ur sugessions.
Thanks
Paul
|
|
|
|
|
Hi,
can you paste your code u are using to connect to the database.
The way it is usually done is pasted below for your reference
The connection stings are specified in the web config file.
In Web.Config, you can add a key to the AppSettings Section
<appsettings>
<add key="MyDBConnection" value="data source=<ServerName>;Initial catalog =<DBName>;user id=<Username>;password=<Password>;">
Example:
<add key="ConnectionString" value="data source=localhost;Initial catalog=northwind;user id=sa;password=mypass">
Then, in your ASP.Net application - just refer to it like this:
using System.Configuration;
string connectionString = (string )ConfigurationSettings.AppSettings["ConnectionString"];
try also adding
<identidy impersonate="true"> segment to your web config file.
i hope this helps
Renu.K
|
|
|
|
|
Thanks for your sugession Renu,
I exaclty did the same what u mentioned in the above example, but i am used to connect with sql server 2000, but the error says that sql server 2005.
Is there any conflict to connedct with Sql server 2000 from ASP.NEt 2.0 remotely.
|
|
|
|
|
try giving the ip address of that sql server in the web config file...
hope this works..
Renu.K
|
|
|
|
|
HI
I Also tried this.
Thanks
Paul
|
|
|
|
|
Hi,
I had to run the code in local server after copying it from a shared folder from another system.i am not able to open it at all, the error message i am getting is "web access failed as the default web access is shared mode".Other error message is "required components are not loaded in the local server".Please help because i am unable to continue with my work
|
|
|
|
|
Have you registered the necessary controls on the published server?
|
|
|
|
|
I am attempting to test a browser hosted control in a secure server (IIS 5) environment. My test computer is running .Net 2.0, and the Policy managing the control on the client side is set for full trust (at the moment). My setup is as follows:
Visual Studio 2005 / .Net 2.0 / Win XP SP2 (both .NET 1.1 and 2.0 installed)
IIS 5 on a Win 2000 SP3 server (both .NET 1.1 and 2.0 installed)
ASP classic (migrating to ASP.NET)
IE 6
The server secure site is configured for .NET 1.1 with classic ASP, but my test page is a .NET 2.0 w/ ASP.NET (that is in a virtual directory configured for .net 2). The server has both installed. The server has older because we are preparing to convert the site to ASP.NET and .NET 2.0. It is the only secure server on which I can test at the moment, so I have to live with the mix until the site is fully converted (which may take months). I navigate to my page from the secure login page. This all seems to work fine, and the control runs fine, except when I attempt to call SmtpClient() from my hosted control resulting in a configuration failure during the call. This problem only occurs on the secure server. When running on any other unsecure server, the SMTP works flawlessly, but then I don't have to go through a login page to test on unsecure sites.
Could the problem be happening because of a mix of .NETs (starting to configure from 2.0 schemas and then droping back to the 1.1 schemas and getting confused, or could it be something else. The only thing that SUGGESTS that it might be this is because the error says that the configuration file has a format error in it). I have been trying to find the source of this problem for several days and am out of ideas. I am no closer to finding the problem now than when I started. I would appreciate any help/ideas/suggestions anyone might have. I am at wits end  and am almost out of hair 
|
|
|
|
|
I’m currently working on a website that we are trying to make accessible. Now I added a page to the site which provide some drop down lists to the users. Such as background color (bgcolor), text size, zoom in (? Not sure how yet), font and things like that. The problem is my very limited experience with ASP.Net. I am a starter. I’d appreciate if one of you guru’s can help me out. Now I can’t or perhaps I should say don’t want to use Java script (user requirement). So basically I have to write server side code that will perform those things (change color, size, font ) etc. Now in my HTML code I have added the runat = “server” attribute to the form element. But that only exposes the Style property when I use it in code behind (under Page_Load event). I don’t want to use style because we won’t be using a CSS for this and I think style property only works with CSS. Since I will be hard coding a few values below in my drop down list and set the values of the color to their hexadecimal value such as #00ff00 for green.
<br />
<br />
<asp:dropdownlist id="ddl2" Runat="server" Width="145px"><br />
<asp:ListItem Value="Select Me">- Select One -</asp:ListItem><br />
<asp:ListItem Value="#ff0033"> RED</asp:ListItem><br />
<asp:ListItem Value="#0000ff"> BLUE</asp:ListItem><br />
<asp:ListItem Value="#00ff00"> GREEN</asp:ListItem><br />
<asp:ListItem Value="#000000"> BLACK</asp:ListItem><br />
</asp:dropdownlist><br><br />
All I want to be able to do when the user clicks the Button, the page and a few more pages will adopt those properties and change color, font etc. The later having the other pages adopt the same values is something I have figured out (I’m planning on using session state for that) Please help me out with this. I even tried exposing a runat = server attribute to the element so that I could programatically change the value of the whole body under the button_click event. But that didn’t work either. Thanks~ Tina
|
|
|
|
|
This sounds like a homework problem (no CSS?)
Anyway try something like this:
runat=server in body tag with an ID
<body runat="server" id="TheBody">
Configure your DDL to AutoPostBack = true and wire up a SelectedIndexChanged handler:
<asp:DropDownList ID="ddlBG" runat="server" AutoPostBack="True" OnSelectedIndexChanged="ddlBG_SelectedIndexChanged" Width="100px">
<asp:ListItem>Pick one</asp:ListItem>
<asp:ListItem>Red</asp:ListItem>
<asp:ListItem>Blue</asp:ListItem>
<asp:ListItem>Green</asp:ListItem>
<asp:DropDownList>
For some reason it turns "OnSelectedIndexChanged" into "removed"
Then set up your DDL with color choices and do something like this in the code behind:
protected void ddlBG_SelectedIndexChanged(object sender, EventArgs e)
{
string color = string.Empty;
switch (this.ddlBG.SelectedItem.Text)
{
case "Red":
color = "#FF0000";
break;
case "Blue":
color = "#0000FF";
break;
case "Green":
color = "#00FF00";
break;
default:
color = "#dfdfdf";
break;
}
this.TheBody.Attributes.Add("bgcolor", color);
}
This probably won't persist accross pages, but you said you have it figured out using session.
|
|
|
|
|
Hello there, thanks for the response. No it's actually not a hw problem...I'm doing an internship for a pretty small software company. By the way, I did try setting the runat = server attribute on the body element...but I still can't use it programatically on the server side.
i.e theBody.Attribure (this doesn't work) which made me wonder if body and form elements perhaps can't be run at server??? Any ideas why they aren't?
I'm using asp .net 1.1.
Thanks
Tina
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
