Click here to Skip to main content
15,389,584 members
Articles / Programming Languages / C#
Posted 15 Nov 2006


58 bookmarked

Queue-Linear Flood Fill: A Fast Flood Fill Algorithm

Rate me:
Please Sign up or sign in to vote.
4.92/5 (44 votes)
15 Nov 20066 min read
A super-fast flood fill algorithm and implementation, plus helpful optimization tips for image processing.
[Images in the demo are copyrighted by the author of the article - please do not publish or redistribute outside of CodeProject without permission.]

Sample Image - queuelinearfloodfill.png


In a previous article I wrote several years ago, Floodfill Algorithms in C# and GDI+, I presented several different flood fill algorithms, and described the differences between them. In this article, I present a single, highly optimized flood fill algorithm, which I call the Queue-Linear algorithm.

This algorithm combines the strengths of both the Queue and Linear algorithms, but has none of the weaknesses. It is very fast, and at the same time, does not succumb to stack overflows, no matter how big the bitmap being processed is. In my tests, my optimized implementation filled an area covering most of a 12.5 megapixel bitmap in about 750ms on a 1.67 GHZ Athlon processor, faster than any other flood fill implementation that I have seen in action.

The Algorithm

The Queue-Linear algorithm is implemented in two parts. The first part, contained in the FloodFill() method in the sample code, prepares all necessary data, and then calls the second part, contained in the QueueLinearFloodFill4() method, for the first time, passing it the coordinates of the starting point.

Figure 1

The QueueLinearFloodFill4() method finds the furthest extent of the flood fill area to the left and right of the x coordinate passed to it, on the scanline specified by the y coordinate. As it checks to the left and right, it fills the area it has checked. It then adds this horizontal range to a queue of ranges to branch up and down from, and returns.

Figure 2

After the FloodFill() method calls LinearFill() for the first time, it enters a loop. The code in the loop dequeues the next flood fill range off the queue, and moves from left to right along the horizontal range, checking each pixel directly above and below the range. For each pixel that matches the starting color closely enough, it calls LinearFill(), which builds a flood fill range starting from that pixel and adds it to the queue, as detailed previously. This process is repeated until the queue is empty.

Since this implementation does not restrict the fill to pixels that exactly match the starting pixel, but instead fills all pixels that are within an adjustable tolerance range, we cannot assume that if a pixel exactly matches the start color, that pixel has already been processed. Therefore, we must keep track of which pixels have already been processed, and treat those pixels as if they are not within the tolerance range, to prevent an endless loop. The best way to do this is via a one-dimensional boolean array, whose length is equal to the number of pixels in the bitmap. (A bit array could be used; however, it would cause a significant decrease in speed.)


Just as with the previous article, the sample application for this article allows you to open a bitmap, adjust the fill tolerance, set the fill color, fill anywhere in the bitmap, and save the resulting bitmap to a file. You can also watch the fill occurring in real time. I have not implemented 8-directional fill in this article's sample, but it would be simple to add should you desire it.

There are two flood filler classes in this sample. UnsafeQueueLinearFloodFiller uses the LockBits() method and pointers to perform the image manipulation, and QueueLinearFloodFiller uses the method detailed in my article, Fast Pointerless Image Manipulation in .NET. This allows you to compare the speed of the two methods. Switch between methods via the combo box on the top left corner of the form.

The Code

The following is the code for the algorithm. The FloodFill() method fills an area starting from a given point. The LinearFill() method is used by the FloodFill() method to get the furthest extent of the color area on a given horizontal scanline, filling as it goes, and then add the horizontal range to the queue.

/// <summary>
/// Fills the specified point on the bitmap with the currently selected 
/// fill color.
/// </summary>
/// <param name="pt">The starting point for the fill.</param>
public override void FloodFill(System.Drawing.Point pt)
    //***Prepare for fill.

    ranges = new FloodFillRangeQueue(((bitmapWidth+bitmapHeight)/2)*5;
    //***Get starting color.
    int x = pt.X; int y = pt.Y;
    int idx = CoordsToByteIndex(ref x, ref y);
    startColor = new byte[] { bitmap.Bits[idx], bitmap.Bits[idx + 1], 
                        bitmap.Bits[idx + 2] };

    bool[] pixelsChecked=this.pixelsChecked;

    //***Do first call to floodfill.
    LinearFill(ref x, ref y);

    //***Call floodfill routine while floodfill ranges still exist 
    //on the queue
    while (ranges.Count > 0)
        //**Get Next Range Off the Queue
        FloodFillRange range = ranges.Dequeue();

        //**Check Above and Below Each Pixel in the Floodfill Range
        int downPxIdx = (bitmapWidth * (range.Y + 1)) + range.StartX;
        int upPxIdx = (bitmapWidth * (range.Y - 1)) + range.StartX;
                    //CoordsToPixelIndex(lFillLoc, y - 1);
        int upY=range.Y - 1;//so we can pass the y coord by ref
        int downY = range.Y + 1;
        int tempIdx;
        for (int i = range.StartX; i <= range.EndX; i++)
            //*Start Fill Upwards
            //if we're not above the top of the bitmap and the pixel 
        //above this one is within the color tolerance
            tempIdx = CoordsToByteIndex(ref i, ref upY);
            if (range.Y > 0 && (!pixelsChecked[upPxIdx]) && 
                    CheckPixel(ref tempIdx))
                LinearFill(ref i, ref upY);

            //*Start Fill Downwards
            //if we're not below the bottom of the bitmap and 
        //the pixel below this one is
            //within the color tolerance
            tempIdx = CoordsToByteIndex(ref i, ref downY);
            if (range.Y < (bitmapHeight - 1) && (!pixelsChecked[downPxIdx]) 
                        && CheckPixel(ref tempIdx))
                LinearFill(ref i, ref downY);


/// <summary>
/// Finds the furthermost left and right boundaries of the fill area
/// on a given y coordinate, starting from a given x coordinate, 
/// filling as it goes.
/// Adds the resulting horizontal range to the queue of floodfill ranges,
/// to be processed in the main loop.
/// </summary>
/// <param name="x">The x coordinate to start from.</param>
/// <param name="y">The y coordinate to check at.</param>
void LinearFill(ref int x, ref int y)
   //cache some bitmap and fill info in local variables for 
   //a little extra speed
   byte[] bitmapBits=this.bitmapBits;
   bool[] pixelsChecked=this.pixelsChecked;
   byte[] byteFillColor= this.byteFillColor;
   int bitmapPixelFormatSize=this.bitmapPixelFormatSize;
   int bitmapWidth=this.bitmapWidth;

    //***Find Left Edge of Color Area
    int lFillLoc = x; //the location to check/fill on the left
    int idx = CoordsToByteIndex(ref x, ref y); 
                //the byte index of the current location
    int pxIdx = (bitmapWidth * y) + x;//CoordsToPixelIndex(x,y);
    while (true)
        //**fill with the color
        bitmapBits[idx] = byteFillColor[0];
        bitmapBits[idx+1] = byteFillColor[1];
        bitmapBits[idx+2] = byteFillColor[2];
        //**indicate that this pixel has already been checked and filled
        pixelsChecked[pxIdx] = true;
        //**screen update for 'slow' fill
        if (slow) UpdateScreen(ref lFillLoc, ref y);
        lFillLoc--;     //de-increment counter
        pxIdx--;        //de-increment pixel index
        idx -= bitmapPixelFormatSize;//de-increment byte index
        //**exit loop if we're at edge of bitmap or color area
        if (lFillLoc <= 0 || (pixelsChecked[pxIdx]) || !CheckPixel(ref idx))


    //***Find Right Edge of Color Area
    int rFillLoc = x; //the location to check/fill on the left
    idx = CoordsToByteIndex(ref x, ref y);
    pxIdx = (bitmapWidth * y) + x;
    while (true)
        //**fill with the color
        bitmapBits[idx] = byteFillColor[0];
        bitmapBits[idx + 1] = byteFillColor[1];
        bitmapBits[idx + 2] = byteFillColor[2];
        //**indicate that this pixel has already been checked and filled
        pixelsChecked[pxIdx] = true;
        //**screen update for 'slow' fill
        if (slow) UpdateScreen(ref rFillLoc, ref y);
        rFillLoc++;     //increment counter
        pxIdx++;        //increment pixel index
        idx += bitmapPixelFormatSize;//increment byte index
        //**exit loop if we're at edge of bitmap or color area
        if (rFillLoc >= bitmapWidth || pixelsChecked[pxIdx] || 
                        !CheckPixel(ref idx))


   //add range to queue
   FloodFillRange r = new FloodFillRange(lFillLoc, rFillLoc, y);
   ranges.Enqueue(ref r);


I have implemented many optimizations in my code to increase performance. These optimizations are useful in other image processing routines as well, so I will discuss some of them here.

Cache bitmap properties

Most properties on the Bitmap class directly or indirectly call the GDI+ API via P/Invoke. If you need to reference these properties often in a performance-critical operation, your code will take a serious performance hit. Therefore, you should cache these properties at the beginning of the operation, and reference the cached version only during the operation.

Store non-call-specific data at class level

Reduced stack space means better performance, so this can be very helpful if your class will not be accessed by multiple threads simultaneously.

Pass value-type arguments to methods by reference where possible

When you repeatedly call a method with value-type parameters passed 'byval', space is allocated for those parameters and the parameters are copied on each call. When I was experimenting with my old 'linear' flood fill algorithm, I found that by passing all possible parameters by reference, I gained a 15% speed increase.

Use a profiler to help you pinpoint bottlenecks

A profiler can catch many things that you may not recognize as bottlenecks. For example, I had originally used a struct with properties to store the tolerance values for the flood filler, but when I checked my code with VS.NET 2005's built-in profiler, I discovered that it caused a 10% performance decrease compared to a simple byte array. A profiler can also save you time in a different way – by helping you to not waste time optimizing in places where it isn't really needed.

Pay attention to the performance implications of everything you do

Sadly, since .NET frees you up from many low-level aspects of programming, many .NET developers do not pay enough attention to the performance and memory aspects of their code. .NET is plenty fast enough for performance-critical code in most cases, as long as developers pay attention to how they code. So even if you don't have to think about the performance implications of what your code does, do it anyway – it's worth it! This article is a good read to start with.


To see the highest performance in the demo, use the release configuration, not the debug configuration. The "binaries" download contains binaries built with the release configuration.

You haven't properly seen the flood fill algorithm in action until you try it out with a large bitmap. A large bitmap is not included in the download in order to reduce download speed, but you can try it with a picture from a good-quality digital camera if you have one available.


This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here


About the Author

J. Dunlap
Web Developer
United States United States
My main goal as a developer is to improve the way software is designed, and how it interacts with the user. I like designing software best, but I also like coding and documentation. I especially like to work with user interfaces and graphics.

I have extensive knowledge of the .NET Framework, and like to delve into its internals. I specialize in working with and MyXaml. I also like to work with ASP.NET, AJAX, and DHTML.

Comments and Discussions

QuestionWorks in VS 2019 with a few mods Pin
Member 252452711-May-20 21:31
MemberMember 252452711-May-20 21:31 
QuestionThanks, and a bug fix Pin
_groo_1-Jul-15 3:46
Member_groo_1-Jul-15 3:46 
BugBug in code -- here is fix Pin
GuavamanX14-Feb-14 21:09
MemberGuavamanX14-Feb-14 21:09 
GeneralNice work Pin
DiponRoy30-Dec-13 9:21
MemberDiponRoy30-Dec-13 9:21 
Questionvs2012 Pin
Herilane12-Jun-13 17:43
professionalHerilane12-Jun-13 17:43 
Answersolution to sliderpicker problem.... Pin
Reeshabh Choudhary3-Apr-13 0:24
MemberReeshabh Choudhary3-Apr-13 0:24 
GeneralProblem Pin
Reeshabh Choudhary2-Apr-13 23:46
MemberReeshabh Choudhary2-Apr-13 23:46 
QuestionCode license Pin
mr.cal13-Feb-12 16:16
Membermr.cal13-Feb-12 16:16 
AnswerRe: Code license Pin
Lea Hayes6-Jun-12 14:14
MemberLea Hayes6-Jun-12 14:14 
QuestionA visual basic version Pin
Stef Cas9-Feb-12 9:51
MemberStef Cas9-Feb-12 9:51 
GeneralMy vote of 5 Pin
Ditmar4-Feb-12 10:24
MemberDitmar4-Feb-12 10:24 
GeneralMy vote of 1 Pin
robertjb2027-Jan-12 10:08
professionalrobertjb2027-Jan-12 10:08 
GeneralRe: My vote of 1 Pin
Daniele Rota Nodari10-May-12 0:07
MemberDaniele Rota Nodari10-May-12 0:07 
BugUnable to find component "SliderPicker" Pin
robertjb2017-Jan-12 7:38
professionalrobertjb2017-Jan-12 7:38 
GeneralHELP!!! Pin
IzualDAn14-Jun-11 14:20
MemberIzualDAn14-Jun-11 14:20 
GeneralRe: HELP!!! Pin
robertjb208-Nov-11 6:45
professionalrobertjb208-Nov-11 6:45 
QuestionUse of pixelsChecked array?? Pin
SreyanC17-Dec-10 10:18
MemberSreyanC17-Dec-10 10:18 
GeneralMy vote of 5 Pin
Mrinny20-Jul-10 12:57
MemberMrinny20-Jul-10 12:57 
QuestionWhat about Alpha Pixels? Pin
Visionator10-Feb-10 3:04
MemberVisionator10-Feb-10 3:04 
GeneralMissing and improper namespaces Pin
mbender18-Dec-09 12:29
Membermbender18-Dec-09 12:29 
GeneralThanks, great article and algorithm, adding a Java port Pin
Ozone7719-Jun-08 19:14
MemberOzone7719-Jun-08 19:14 
GeneralRe: Thanks, great article and algorithm, adding a Java port Pin
Joel R. Becker18-Apr-09 5:48
MemberJoel R. Becker18-Apr-09 5:48 
QuestionNice work Pin
bulupe12-Sep-07 5:48
Memberbulupe12-Sep-07 5:48 
GeneralSomething to consider for the unmanaged code Pin
Rei Miyasaka26-Aug-07 13:05
MemberRei Miyasaka26-Aug-07 13:05 
GeneralA Little Bug Pin
hankhuf7-Aug-07 11:30
Memberhankhuf7-Aug-07 11:30 
I like many things about your algorithm, and it has inspired me to write my own. I did notice a small bug during my testing. If you load a pure red PNG and flood fill with green or black or some other contrasty color, you will see that pixels along the left edge do not fill.


General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.